Adiabatic shear banding in ultrafine-grained Fe processed by severe plastic deformation

We have investigated the plastic deformation behavior of ultrafine-grained (UFG) bulk Fe. The UFG microstructure (grain size ∼300 and ∼150 nm) was obtained through combined equal channel angular extrusion and low-temperature rolling, and confirmed using transmission electron microscopy. Mechanical properties were measured under both quasi-static (strain rate in the range of 10−4–100 s−1) and dynamic (strain rate up to ∼103 s−1 using the Kolsky bar technique) compressive loading. Dynamic stress–strain curves of the UFG Fe exhibit significant flow softening, in addition to a significant reduction in the strain rate sensitivity of the flow stress. Consequently, under dynamic loading the plastic flow mode changes from the uniform deformation of conventional coarse-grained Fe to substantial localized deformation in UFG Fe. Both in situ high-speed camera movies and post-loading optical and scanning electron microscopy show the development of adiabatic shear bands, observed for the first time in pure Fe under compressive loading conditions. The morphology of the shear bands and the increased propensity for flow localization due to the ultrafine grain structure are explained using established models for adiabatic shear banding.

[1]  M. Tang,et al.  Mesoscopic modelling and simulation of plasticity in fcc and bcc crystals: Dislocation intersections and mobility , 1998 .

[2]  K. T. Ramesh,et al.  Deformation behavior and plastic instabilities of ultrafine-grained titanium , 2001 .

[3]  H. Matsui,et al.  Mechanical Properties of High Purity Iron at Low Temperatures , 1978 .

[4]  T. Langdon,et al.  Grain refinement of pure nickel using equal-channel angular pressing , 2002 .

[5]  J. Jonas,et al.  Plastic stability in tension and compression , 1976 .

[6]  T. Wright.  Shear band susceptibility: Work hardening materials , 1992 .

[7]  U. F. Zackay.  High-strength Materials , 1965 .

[8]  K. T. Ramesh,et al.  Failure mode and dynamic behavior of nanophase iron under compression , 1999 .

[9]  T. Langdon,et al.  The potential for scaling ECAP: effect of sample size on grain refinement and mechanical properties , 2001 .

[10]  Patrick B. Berbon,et al.  Deformation heating and its effect on grain size evolution during equal channel angular extrusion , 2001 .

[11]  V. Vítek,et al.  Plastic anisotropy in b.c.c. transition metals , 1998 .

[12]  R. Valiev,et al.  Factors influencing the flow and hardness of materials with ultrafine grain sizes , 1998 .

[13]  E. A. Payzant,et al.  Texture formation in bulk iron processed by simple shear , 1998 .

[14]  K. T. Ramesh,et al.  Effects of nanocrystalline and ultrafine grain sizes on constitutive behavior and shear bands in iron , 2003 .

[15]  Yi-long Bai,et al.  Adiabatic Shear Localization: Occurrence, Theories and Applications , 1992 .

[16]  T. Langdon,et al.  Influence of channel angle on the development of ultrafine grains in equal-channel angular pressing , 1998 .

[17]  K. T. Ramesh,et al.  Evolution and microstructure of shear bands in nanostructured Fe , 2002 .

[18]  Terence G. Langdon,et al.  The process of grain refinement in equal-channel angular pressing , 1998 .

[19]  J. Christian.  Some surprising features of the plastic deformation of body-centered cubic metals and alloys , 1983 .

[20]  Patrick B. Berbon,et al.  Influence of pressing speed on microstructural development in equal-channel angular pressing , 1999 .

[21]  T. Langdon,et al.  Influence of a round corner die on flow homogeneity in ECA pressing , 2003 .

[22]  P. Perzyna,et al.  The Physics and Mathematics of Adiabatic Shear Bands , 2002 .

[23]  J. G. Sevillano,et al.  Intrinsic size effects in plasticity by dislocation glide , 2001 .

[24]  Xuemei Cheng,et al.  Deformation Twinning in Nanocrystalline Aluminum , 2003, Science.

[25]  M. Mayo,et al.  Structure and Mechanical Behavior of Bulk Nanocrystalline Materials , 1999 .

[26]  R. Valiev,et al.  Bulk nanostructured materials from severe plastic deformation , 2000 .

[27]  D. Shin,et al.  Microstructural changes in equal channel angular pressed low carbon steel by static annealing , 2000 .

[28]  H. Ockendon,et al.  A model for fully formed shear bands , 1992 .

[29]  R. Valiev,et al.  Investigations and applications of severe plastic deformation , 2000 .

[30]  Yong-Seog Kim,et al.  Thermal stability and mechanical properties of ultrafine grained low carbon steel , 2000 .

[31]  E. Lavernia,et al.  Mechanical properties of iron processed by severe plastic deformation , 2003 .

[32]  V. Segal.  Materials processing by simple shear , 1995 .

[33]  Simon R. Phillpot,et al.  Dislocation processes in the deformation of nanocrystalline aluminium by molecular-dynamics simulation , 2002, Nature materials.

[34]  D. G. Morris,et al.  Ductility of Nanostructured Materials , 1999 .

[35]  Fenghua Zhou,et al.  High tensile ductility in a nanostructured metal , 2002, Nature.

[36]  R. Valiev,et al.  Structure and deformaton behaviour of Armco iron subjected to severe plastic deformation , 1996 .

[37]  T. Langdon,et al.  Influence of pressing temperature on microstructural development in equal-channel angular pressing , 2000 .

[38]  K. T. Ramesh,et al.  Nano-structured vanadium: processing and mechanical properties under quasi-static and dynamic compression , 2004 .

[39]  Yong-Seog Kim,et al.  Microstructural evolution in a commercial low carbon steel by equal channel angular pressing , 2000 .

[40]  John E. Carsley,et al.  Mechanical behavior of a bulk nanostructured iron alloy , 1998 .

[41]  T. Langdon,et al.  Significance of adiabatic heating in equal-channel angular pressing , 1999 .

[42]  J. W. Walter,et al.  On stress collapse in adiabatic shear bands , 1987 .

[43]  E. W. Hart.  Theory of the tensile test , 1967 .

[44]  Y. Bai,et al.  Width of adiabatic shear bands , 1985 .

[45]  K. T. Ramesh,et al.  Microstructure and mechanical properties of tantalum after equal channel angular extrusion (ECAE) , 2003 .

[46]  J. Jonas,et al.  Formability and workability of metals : plastic instability and flow localization , 1984 .

[47]  R. Armstrong,et al.  Dislocation-mechanics-based constitutive relations for material dynamics calculations , 1987 .

[48]  C. Koch,et al.  Mechanical properties in tension of mechanically attrited nanocrystalline iron by the use of the miniaturized disk bend test , 1998 .

[49]  S. Phillpot,et al.  Deformation twinning in nanocrystalline Al by molecular-dynamics simulation , 2002 .

[50]  Jongryoul Kim,et al.  Development of deformation structures in low carbon steel by equal channel angular pressing , 2001 .

[51]  Wei Qiuming,et al.  Thermodynamics of the iron martensitic transformation and the ms temperature of iron , 1991 .

[52]  T. Langdon,et al.  Optimizing the rotation conditions for grain refinement in equal-channel angular pressing , 1998 .

[53]  T. Langdon,et al.  Review: Processing of metals by equal-channel angular pressing , 2001 .

[54]  R. Valiev,et al.  Structure and properties of ultrafine-grained materials produced by severe plastic deformation , 1993 .

[55]  H. Van Swygenhoven,et al.  Dimples on Nanocrystalline Fracture Surfaces As Evidence for Shear Plane Formation , 2003, Science.

[56]  Terence G. Langdon,et al.  The shearing characteristics associated with equal-channel angular pressing , 1998 .