The Performance and Wear Characterization of a High-Power High-Isp NASA Hall Thruster

The performance of a 50-kilowatt-class Hall thruster designed for high voltage operation was measured using both xenon and krypton propellants. The thruster was operated at discharge powers ranging from 4-46 kW on xenon and 5-65 kW on krypton. The device produced thrust ranging from 0.3 to 2.1 N at discharge voltages between 200 and 1050 V. Maximum anode specific impulses of 3370 and 4940 sec. were demonstrated at discharge voltages of 600 V on xenon and 1050 V on krypton, respectively. The peak anode efficiencies were 72% at 600 V on xenon and 68% at 1050 V on krypton. In addition to performance testing the thruster was operated on krypton at 700 V and 53 A to characterize the thruster wear. The observed wear characteristics of the thruster were compared to previous xenon Hall thruster wear results.

[1]  Alec D. Gallimore,et al.  The D-100 performance and plume characterization on krypton , 1996 .

[2]  Alec D. Gallimore,et al.  THE DEVELOPMENT AND CHARACTERIZATION OF A TWO-STAGE HYBRID HALL/ION THRUSTER , 2004 .

[3]  Robert S. Jankovsky,et al.  A Hall Thruster Performance Model Incorporating the Effects of a Multiply-Charged Plasma , 2001 .

[4]  J. Haas.  Low perturbation interrogation of the internal and near -field plasma structure of a Hall thruster using a high -speed probe positioning system. , 2001 .

[5]  Jack Fisher,et al.  The Qualification of a 4.5 kW Hall Thruster Propulsion Subsystem , 2003 .

[6]  Alfred Schock,et al.  Space Nuclear Power: An Overview , 1996 .

[7]  J Reece Roth,et al.  Industrial Plasma Engineering: Volume 2: Applications to Nonthermal Plasma Processing , 2001 .

[8]  T. Haag,et al.  RHETT/EPDM Performance Characterization , 1998 .

[9]  Vladimir Kim,et al.  Investigation of SPT Performance and Particularities of it's Operation with Kr and Kr/Xe Mixtures *+ , 2001 .

[10]  Egorov,et al.  Measurement of plasma parameters in the stationary plasma thruster(SPT-100) plume and its effect on spacecraft components. , 1992 .

[11]  David H. Manzella,et al.  Investigation of the Erosion Characteristics of a Laboratory Hall Thruster , 2003 .

[12]  R. Hofer,et al.  Development and characterization of high -efficiency, high -specific impulse xenon Hall thrusters. , 2004 .

[13]  Manuel Martinez-Sanchez,et al.  Kinetic Study of Wall Effects in SPT Hall Thrusters , 2004 .

[14]  Lee S. Mason,et al.  1000 Hours of Testing on a 10 Kilowatt Hall Effect Thruster , 2001 .

[15]  T. W. Haag.  Thrust stand for high‐power electric propulsion devices , 1991 .

[16]  Robert S. Jankovsky,et al.  Laboratory Model 50 kW Hall Thruster , 2002 .

[17]  N. Maslennikov,et al.  SPT-100 subsystem qualification status , 1995 .

[18]  David H. Manzella,et al.  Investigation of Low Voltage/High Thrust Hall Thruster Operation , 2003 .

[19]  David H. Manzella,et al.  50 KW Class Krypton Hall Thruster Performance , 2003 .

[20]  Robert S. Jankovsky,et al.  High Voltage TAL Performance , 2001 .

[21]  Robert S. Jankovsky,et al.  High Voltage SPT Performance , 2001 .

[22]  Celeste M. Satter.  JIMO Follow‐On Mission Studies , 2005 .

[23]  Salvatore Scaglione,et al.  Sputtering yield of optical materials: Sigmund’s model and experimental results , 1994 .

[24]  P. Sigmund.  Theory of Sputtering. I. Sputtering Yield of Amorphous and Polycrystalline Targets , 1969 .

[25]  Peter Y. Peterson,et al.  Factors Affecting the Efficiency of Krypton Hall Thrusters , 2004 .

[26]  Michel Dudeck,et al.  Operating mode investigation of a Laboratory Stationary Plasma Thruster , 1999 .

[27]  I. Boyd,et al.  Predicting Hall Thruster Operational Lifetime , 2004 .

[28]  Bruce Pote,et al.  Performance of a High Specific Impulse Hall Thruster , 2001 .

[29]  David T. Jacobson.  High Voltage TAL Erosion Characterization , 2002 .