Design and CFD study of a hybrid vertical-axis wind turbine by employing a combined Bach-type and H-Darrieus rotor systems

Abstract The objective of this work was to design, simulate and evaluate the performance of an innovative hybrid vertical-axis wind turbine (VAWT) for obtaining an extended operational range and enhancing self-starting capabilities. An extensive research was conducted to explore the design parameters for obtaining an optimum novel hybrid VAWT configuration. The hybrid VAWT consisting of a 2-bladed modified Savonius Bach-type rotor and a 3-bladed Darrieus turbine was modeled and analyzed in computational fluid dynamics (CFD) to calculate the characteristic parameters of the rotor system. The geometry was then used to generate the grid in ANSYS Meshing for computational fluid dynamics (CFD) analyses to evaluate the performance of the designed hybrid VAWT. Results indicated that while the Darrieus turbine had the highest coefficient of power (Cp) of 48.4% at a TSR of 2.50, it suffered from high start-up torque requirements. The hybrid turbine demonstrated self-starting capabilities while reaching a maximum Cp of 41.4% at a TSR of 2.5 and operation up to a TSR value of 4.5. When compared to previous hybrid VAWT designs, the proposed configuration demonstrated improvements to the efficiency and operational range which support the energy sustainability prospects.

[1]  Tong Zhou,et al.  Numerical study of detailed flow field and performance of Savonius wind turbines , 2013 .

[2]  Rajat Gupta,et al.  CFD Analysis of Flow Physics and Aerodynamic Performance of a Combined Three-Bucket Savonius and Three-Bladed Darrieus Turbine , 2011 .

[3]  Kenny C. S Kwok,et al.  Power generation analysis of PowerWindow, a linear wind generator, using computational fluid dynamic simulations , 2015 .

[4]  R. Zahari,et al.  Synergy of Savonius and Darrieus types for vertical axis wind turbine , 2016 .

[5]  John E. Quaicoe,et al.  Hydrokinetic energy conversion systems and assessment of horizontal and vertical axis turbines for river and tidal applications: A technology status review , 2009 .

[6]  K Kacprzak,et al.  Numerical analysis of the flow around the Bach-type Savonius wind turbine , 2014 .

[7]  Ernesto Benini,et al.  The Darrieus wind turbine: Proposal for a new performance prediction model based on CFD , 2011 .

[8]  Riman Sipahutar,et al.  Performance of Combined Water Turbine Darrieus- Savonius with Two Stage Savonius Buckets and Single Deflector , 2015 .

[9]  Francesco Balduzzi,et al.  Feasibility analysis of a Darrieus vertical-axis wind turbine installation in the rooftop of a building , 2012 .

[10]  Takahiro Kiwata,et al.  Experimental and numerical investigation of a three-dimensional vertical-axis wind turbine with variable-pitch , 2015 .

[11]  Nasir Hayat,et al.  Vertical axis wind turbine – A review of various configurations and design techniques , 2012 .

[12]  Paolo Schito,et al.  CFD study of Savonius wind turbine: 3D model validation and parametric analysis , 2017 .

[13]  Damodar Maity,et al.  Optimum design configuration of Savonius rotor through wind tunnel experiments , 2008 .

[14]  Jian Chen,et al.  A detailed investigation of a novel vertical axis Darrieus wind rotor with two sets of blades , 2017 .

[15]  Maurizio Collu,et al.  Offshore floating vertical axis wind turbines, dynamics modelling state of the art. part I: Aerodynamics , 2014 .

[16]  F. Ponta,et al.  Innovative Concepts in Wind-Power Generation: The VGOT Darrieus , 2011 .

[17]  Ki-Wahn Ryu,et al.  Effects of end plates with various shapes and sizes on helical Savonius wind turbines , 2015 .

[18]  Agnimitra Biswas,et al.  Investigations on self-starting and performance characteristics of simple H and hybrid H-Savonius vertical axis wind rotors , 2014 .

[19]  W. A. El-Askary,et al.  Harvesting wind energy for improving performance of Savonius rotor , 2015 .

[20]  Herbert J. Sutherland,et al.  A summary of the fatigue properties of wind turbine materials , 2000 .

[21]  Hee-Chang Lim,et al.  Effect of twist angle on the performance of Savonius wind turbine , 2016 .

[22]  M. A. Kamoji,et al.  Experimental investigations on single stage modified Savonius rotor , 2009 .

[23]  D. Gorelov,et al.  Prospects for development of wind turbines with orthogonal rotor , 2008 .

[24]  Ernesto Benini,et al.  A computational assessment of the aerodynamic performance of a tilted Darrieus wind turbine , 2015 .

[25]  D. Jager,et al.  Wind Turbine Generator System Power Performance Test Report for the Gaia-Wind 11-kW Wind Turbine , 2009 .

[26]  Christopher Yu Hang Chao,et al.  A computational study of the effects of the radius ratio and attachment angle on the performance of a Darrieus-Savonius combined wind turbine , 2017 .

[27]  Grzegorz Liskiewicz,et al.  Numerical investigation of conventional and modified Savonius wind turbines , 2013 .

[28]  Mosfequr Rahman,et al.  Wind tunnel testing and numerical simulation on aerodynamic performance of a three-bladed Savonius wind turbine , 2013 .

[29]  Wen Tong Chong,et al.  The design, simulation and testing of an urban vertical axis wind turbine with the omni-direction-guide-vane , 2013 .

[30]  Bert Blocken,et al.  50 years of Computational Wind Engineering: Past, present and future , 2014 .

[31]  Dag Herman Zeiner-Gundersen.  A novel flexible foil vertical axis turbine for river, ocean, and tidal applications , 2015 .

[32]  Weidong Zhu,et al.  Experimental and numerical study of turbulence effect on aerodynamic performance of a small-scale vertical axis wind turbine , 2016 .

[33]  P. Sandborn,et al.  A Levelized Cost of Energy (LCOE) model for wind farms that include Power Purchase Agreements (PPAs) , 2018, Renewable Energy.

[34]  M. Jamil,et al.  Experimental Study of a Combined Three Bucket H-Rotor with Savonius Wind Turbine , 2013 .

[35]  M. H. Mohamed,et al.  Performance investigation of H-rotor Darrieus turbine with new airfoil shapes , 2012 .

[36]  Ying Wang,et al.  Numerical investigation on aerodynamic performance of a novel vertical axis wind turbine with adaptive blades , 2016 .

[37]  Gabriel Naccache,et al.  CFD Based Analysis and Parametric Study of a Novel Wind Turbine Design: the Dual Vertical Axis Wind Turbine , 2016 .