Cold Heading of Cylindrical PVC Billets: An Experimental and Theoretical Investigation

The design of upset forged metal parts by cold heading is presently well established. Major operating parameters are identified and the typical modes of deformation that may occur during the process are fully characterized. In contrast to metals, there is no research work and no practical design rules in the specialized literature concerning the cold heading of polymer parts. This paper is concerned with the abovementioned lack of knowledge and is a contribution toward the application of cold heading to polymers. The experimental research work makes use of polyvinyl chloride (PVC) and the overall findings are interpreted in the light of an innovative extension of the flow formulation that is capable of modeling cold forming of pressure-sensitive materials under a nonassociated flow rule. Emphasis is placed on the deformation mechanics of cold heading applied to PVC and on the influence of the major operating parameters on the overall formability limits of the process. Results show that cold heading of PVC can be successfully utilized for producing upset forged parts.

[1]  W. Whitney,et al.  Yielding of glassy polymers: Volume effects , 1967 .

[2]  S. S. Sternstein,et al.  Yield criteria for plastic deformation on glassy high polymers in general stress fields , 1969 .

[3]  R. S. Raghava,et al.  The macroscopic yield behaviour of polymers , 1973 .

[4]  R. S. Raghava,et al.  Pressure dependent yield criteria for polymers , 1974 .

[5]  Shiro Kobayashi,et al.  Rigid-Plastic Analysis of Cold Heading by the Matrix Method , 1975 .

[6]  O. Richmond,et al.  Effect of hydrostatic pressure on the deformation behavior of polyethylene and polycarbonate in tension and in compression , 1979 .

[7]  A. Atkins,et al.  Strength and Fracture of Engineering Solids , 1983 .

[8]  G. Widera,et al.  Handbook of Metal Forming , 1985 .

[9]  J. Mackerle.  BIBLIOGRAPHY: Finite-element analysis and simulation of polymers: a bibliography (1976 - 1996) , 1997 .

[10]  J. Lee,et al.  Yield Functions and Flow Rules for Porous Pressure-Dependent Strain-Hardening Polymeric Materials , 2000 .

[11]  J. Mackerle.  Finite element analysis and simulation of polymers?an addendum: a bibliography (1996?2002) , 2002 .

[12]  Glen Benge.  Overview: Cementing Technology (August 2004) , 2004 .

[13]  Paulo A.F. Martins,et al.  Three-dimensional modelling of forging processes by the finite element flow formulation , 2004 .

[14]  C. Bucknall.  New criterion for craze initiation , 2007 .

[15]  Paulo A.F. Martins,et al.  Nosing of thin-walled PVC tubes into hollow spheres using a die , 2009 .