Electrochemical Analysis of Some Toxic Metals by Ion–Selective Electrodes

An overview of potentiometric sensors that are capable of detecting toxic heavy metal ions in environmental samples is presented and discussed. Notwithstanding the tremendous work performed so far, it is obvious that still several limitations do exist in terms of selectivity, limits of detection, dynamic ranges, applicability to specific problems, and reversibility. A survey on important advances in potentiometric sensors with regard to high selectivity, lower detection limit, fast response time, and on-line environmental analysis is presented in this review article. [Supplemental materials are available for this article. Go to the publisher's online edition of Critical Reviews in Analytical Chemistry to view the free supplemental file.]

[1]  M. Ganjali,et al.  Carcinoembryonic antigen admittance biosensor based on Au and ZnO nanoparticles using FFT admittance voltammetry. , 2011, Analytical chemistry.

[2]  M. Shahlaei,et al.  New Zn(II)-Selective Potentiometric Sensor Based on 3-Hydroxy-2-Naphthoic Hydrazide , 2009 .

[3]  A. Mittal,et al.  Removal and Recovery of the Hazardous Azo Dye Acid Orange 7 through Adsorption over Waste Materials: Bottom Ash and De-Oiled Soya , 2006 .

[4]  M. Arvand,et al.  New Fe(II) Ion-selective electrode based On N-Phenylaza-15-Crown-5 as neutral carrier in PVC matrix , 2009 .

[5]  M. Aghaie,et al.  Silver(I)-selective membrane potentiometric sensor based on two recently synthesized ionophores containing calix[4]arene , 2009 .

[6]  M. Ganjali,et al.  Novel Potentiometric Membrane Sensor for the Determination of Trace Amounts of Chromium(III) Ions , 2003, Analytical sciences : the international journal of the Japan Society for Analytical Chemistry.

[7]  M. Naushad.  A new ion-selective electrode based on aluminium tungstate for Fe(III) determination in rock sample, pharmaceutical sample and water sample , 2008 .

[8]  Ashutosh Kumar Singh,et al.  Polymeric membrane and coated graphite electrode based on newly synthesized tetraazamacrocyclic ligand for trace level determination of nickel ion in fruit juices and wine samples , 2009 .

[9]  M. Ganjali,et al.  Synthesis of a New Hexadendates Schiff's Base and Its Application in the Fabrication of a Highly Selective Mercury(II) Sensor , 2007 .

[10]  R. Goyal,et al.  Nickel(II)-selective sensor based on dibenzo-18-crown-6 in PVC matrix. , 2007, Talanta.

[11]  Y. Shim,et al.  Chromium(III)-selective Electrode Using p-(4-Acetanilidazo)calix[4]arene as an Ionophore in PVC Matrix , 2008 .

[12]  M. H. Mashhadizadeh,et al.  Nickel(II) selective membrane potentiometric sensor using a recently synthesized mercapto compound as neutral carrier. , 2003, Talanta.

[13]  M. Shamsipur,et al.  Lead ion-selective membrane electrode based on 1,10-dibenzyl-1,10-diaza-18-crown-6 , 2000 .

[14]  Ashutosh Kumar Singh,et al.  A New PVC-Membrane Electrode Based on a Diazatetrathia (N2S4) Macrocyclic Ligand for Selective Determination of Silver Ion , 2003 .

[15]  A. Mittal,et al.  Adsorption of Safranin-T from wastewater using waste materials- activated carbon and activated rice husks. , 2006, Journal of colloid and interface science.

[16]  Y. Shim,et al.  A novel cobalt(II)-selective potentiometric sensor based on p-(4-n-butylphenylazo)calix[4]arene. , 2009, Talanta.

[17]  R. Goyal,et al.  A new Zn(II)-selective potentiometric sensor based on 4-tert-butylcalix[4]arene in PVC matrix. , 2006, Talanta.

[18]  Ashutosh Kumar Singh,et al.  Development of an electrochemical sensor based on Schiff base for Cu(II) determination at nano level in river water and edible materials , 2009 .

[19]  Yong-Kook Choi,et al.  Lead(II)-selective electrodes based on tetrakis(2-hydroxy-1-naphthyl)porphyrins: the effect of atropisomers , 2004 .

[20]  Ashutosh Kumar Singh,et al.  Comparative evaluation of Dy(III) selective poly(vinyl) chloride based membrane electrodes of macrocyclic tetraimine Schiff's bases. , 2009, Talanta.

[21]  L. Singh,et al.  PVC-BASED NEUTRAL CARRIER AND ORGANIC EXCHANGER MEMBRANES AS SENSORS FOR THE DETERMINATION OF BA2+ AND SR2+ , 1999 .

[22]  Ajay K. Jain,et al.  Macrocycle Based Membrane Sensors for the Determination of Cobalt(II) Ions , 1997 .

[23]  Rainer Ludwig,et al.  Electroanalytical studies on cadmium(II) selective potentiometric sensors based on t-butyl thiacalix[4]arene and thiacalix[4]arene in poly(vinyl chloride) , 2008 .

[24]  A. Bharti,et al.  A comparative study on PVC based sensors in determination of. , 2011, Analytical methods : advancing methods and applications.

[25]  M. Shamsipur,et al.  Novel Ag+ ion-selective electrodes based on two new mixed azathioether crowns containing a 1,10-phenanthroline sub-unit , 2002 .

[26]  A. Amr,et al.  New lead (II) selective membrane potentiometric sensors based on chiral 2,6-bis-pyridinecarboximide derivatives. , 2003, Talanta.

[27]  M. Lai,et al.  Mercury(II) and silver(I) ion-selective electrodes based on dithia crown ethers , 1986 .

[28]  V. Gupta,et al.  Novel PVC-based membrane sensors selective for vanadyl ions. , 1998, Talanta.

[29]  I. Ion,et al.  Polyvinyl chloride-based membranes of 3,7,11-tris (2-pyridylmethyl)-3,7,11,17-tetraazabicyclo [11.3.1] heptadeca-1(17),13,15-triene as a Pb(II)-selective sensor. , 2010 .

[30]  M. Pal,et al.  Comparative study on 2-amino-1,4-naphthoquinone derived ligands as indium (III) selective PVC-based sensors. , 2010, Talanta.

[31]  S. Chandra,et al.  A highly selective mercury electrode based on a diamine donor ligand. , 2005, Talanta.

[32]  V. Gupta,et al.  A polystyrene based heterogeneous solid membrane of cerium(IV) selenite as sensor for Hg(II) ions , 1995 .

[33]  Ashutosh Kumar Singh,et al.  Silver(I)-selective electrode based on [Bz2Oxo4(18)dieneS4] tetrathia macrocyclic carrier , 2006, Analytical and bioanalytical chemistry.

[34]  R. Sharma,et al.  Comparative studies on Tb (III)-selective PVC membrane sensors. , 2010, Talanta.

[35]  Pankaj Kumar,et al.  Cadmium(II)-selective sensors based on dibenzo-24-crown-8 in PVC matrix , 1999 .

[36]  M. Ganjali,et al.  Highly Selective and Sensitive Copper(II) Membrane Sensors Based on 6‐Methyl‐4‐(1‐phenylmethylidene)amino‐3‐thioxo‐1,2,4‐triazin‐5‐one as a New Neutral Ionophore , 2005 .

[37]  A. Khan,et al.  Analysis of mercury ions in effluents using potentiometric sensor based on nanocomposite cation exchanger Polyaniline–zirconium titanium phosphate , 2011 .

[38]  C. Wardak,et al.  Properties of the ion-selective electrode with a chelating pseudo-liquid membrane phase for zinc determination , 2000 .

[39]  Synthesis of a new oxime and its application to the construction of a highly selective and sensitive Co(II) PVC-based membrane sensor. , 2004, Analytical sciences : the international journal of the Japan Society for Analytical Chemistry.

[40]  V. Gupta,et al.  Chelating ionophore based membrane sensors for copper(II) ions. , 2005, Talanta.

[41]  A. Yari,et al.  An electrochemical Ni(II)-selective sensor-based on a newly synthesized dioxime derivative as a neutral ionophore , 2006 .

[42]  Ashutosh Kumar Singh,et al.  Copper Incorporated [Me2(15)dieneN4] Macrocyclic Complex for Fabrication of PVC based Membrane Electrode for Copper , 2006 .

[43]  D. Reinhoudt,et al.  Silver selective electrodes based on thioether functionalized calix[4]arenes as ionophores , 1994 .

[44]  V. Gupta,et al.  Pb(II) Selective Potentiometric Sensor Based on 4‐tert‐Butylcalix[4]arene in PVC Matrix , 2002 .

[45]  J. M. Bhatnagar,et al.  Copper(II) selective electrochemical sensor based on Schiff Base complexes. , 2004, Talanta.

[46]  A D Russell,et al.  Antimicrobial activity and action of silver. , 1994, Progress in medicinal chemistry.

[47]  M. Shamsipur,et al.  Lead-selective poly(vinyl cholride) membrane electrode based on piroxicam as a neutral carrier , 2002 .

[48]  M. Ghaedi,et al.  Preparation of a new chromium(III) selective electrode based on 1-[(2-hydroxy ethyl) amino]-4-methyl-9H-thioxanthen-9-one as a neutral carrier. , 2010, Journal of hazardous materials.

[49]  M. Ganjali,et al.  Determination of Cr3+ ions in biological and environmental samples by a chromium(III) membrane sensor based on 5-amino-1-phenyl-1H-pyrazole-4-carboxamide , 2009 .

[50]  H. Mukai,et al.  Copper(II)-selective membrane electrode based on hydrotris(3-isopropylpyrazolyl)methane in a poly(vinyl chloride) matrix , 2003 .

[51]  V. Gupta,et al.  Chromium(III) selective membrane sensors based on Schiff bases as chelating ionophores. , 2007, Analytica chimica acta.

[52]  Ashutosh Kumar Singh,et al.  Ni(II) selective sensors based on Schiff bases membranes in poly(vinyl chloride). , 2008, Analytica chimica acta.

[53]  E. Pretsch,et al.  Potentiometric Cd2+-selective electrode with a detection limit in the low ppt range , 2001 .

[54]  R. Razavi,et al.  Cobalt(II)-selective membrane electrode using a recently synthesized mercapto compound , 2002 .

[55]  Ashutosh Kumar Singh,et al.  Neutral carriers based polymeric membrane electrodes for selective determination of mercury (II). , 2007, Analytica chimica acta.

[56]  M. Ganjali,et al.  Highly selective and sensitive chromium(III) membrane sensors based on a new tridentate Schiff's base , 2006 .

[57]  S. Alegret,et al.  Lead(II) ion selective electrodes with PVC membranes based on two bis-thioureas as ionophores: 1,3-bis(N'-benzoylthioureido)benzene and 1,3-bis(N'-furoylthioureido)benzene. , 2010, Journal of hazardous materials.

[58]  Shiva Agarwal,et al.  A Porphyrin Based Potentiometric Sensor for Zn2+ Determination , 2003 .

[59]  M. Rahimi‐Nasrabadi,et al.  Highly selective and sensitive copper membrane electrode based on a new synthesized Schiff base. , 2007, Talanta.

[60]  S. Ikram,et al.  A polyvinylchloride-based cadmium ion-selective electrode using [Mo₂(OAc)₂(H₂-calix[4]arene)] as an electroactive material. , 2010, Water science and technology : a journal of the International Association on Water Pollution Research.

[61]  Ali Akbar Saboury,et al.  Highly Selective and Sensitive Membrane Sensors for Copper(II) Ion Based on a New Benzo‐Substituted Macrocyclic Diamide 6,7,8,9,10‐Hexahydro‐2H‐1,13,4,7,10‐benzodioxatriazacyclopentadecine‐3,11(4H,12H)‐dione , 2007 .

[62]  H. Sharghi,et al.  Novel PVC-membrane potentiometric sensors based on a recently synthesized sulfur-containing macrocyclic diamide for Cd2+ ion. Application to flow-injection potentiometry. , 2009, Journal of hazardous materials.

[63]  A. Srivastava,et al.  Coated wire lead(II) selective potentiometric sensor based on 4-tert-butylcalix[6]arene , 2004 .

[64]  A. Kamel.  A Novel Flow‐Through Planar Solid Contact Sensor for the Determination of Lead with Potentiometric Anionic Response , 2007 .

[65]  M. Shamsipur,et al.  Novel coated-graphite membrane sensor based on N,N′-dimethylcyanodiaza-18-crown-6 for the determination of ultra-trace amounts of lead , 2002 .

[66]  A. Jain,et al.  Anion recognition using newly synthesized hydrogen bonding diamide receptors: PVC based sensors for carbonate , 2006 .

[67]  S. Srivastava,et al.  PVC-Based 2,2,2-Cryptand Sensor for Zinc Ions. , 1996, Analytical chemistry.

[68]  R. Goyal,et al.  Aluminium (III)-selective PVC membrane sensor based on a Schiff base complex of N,N'-bis (salicylidene)-1,2-cyclohexanediamine , 2009 .

[69]  Vinay Gupta,et al.  A new membrane sensor for UO 22+ ions based on 2‐hydroxyacetophenoneoxime‐thiourea‐trioxane resin , 1997 .

[70]  Vinod K. Gupta,et al.  Comparative studies of neodymium (III)-selective PVC membrane sensors. , 2009, Analytica chimica acta.

[71]  R. Mahajan,et al.  Mercury(II) Ion-Selective Electrodes Based on p-tert-Butyl Calix[4]crowns with Imine Units , 2004, Analytical sciences : the international journal of the Japan Society for Analytical Chemistry.

[72]  V. Jovanović,et al.  A Copper(II) Ion-Selective Potentiometric Sensor Based on N,N′,N″,N′′′-Tetrakis(2-pyridylmethyl)-1,4,8,11-tetraazacyclotetradecane in PVC Matrix , 2010 .

[73]  Ashutosh Kumar Singh,et al.  A cobalt(II)-selective PVC membrane based on a Schiff base complex of N,N′-bis(salicylidene)-3,4-diaminotoluene , 2006 .

[74]  G. Somer,et al.  A novel iron(III) selective membrane electrode based on benzo-18-crown-6 crown ether and its applications , 2007 .

[75]  M. Ganjali,et al.  Fabrication of an iron(III) PVC-membrane sensor based on bis-benzilthiocarbohydrazide as a selective sensing material , 2009 .

[76]  M. H. Mashhadizadeh,et al.  Co2+-selective membrane electrode based on the Schiff Base NADS , 2003, Analytical and bioanalytical chemistry.

[77]  F. Teixidor,et al.  Silver-selective membrane electrodes using acyclic dithia benzene derivative neutral carriers. Comparison with related macrocyclic compounds , 1994 .

[78]  V. Gupta,et al.  Dicyclohexano-18-Crown-6 as Active Material in PVC Matrix Membrane for the Fabrication of Cadmium Selective Potentiometric Sensor (Proceedings of The 5Th East Asian Conference on Chemical Sensors: The 33RD Chemical Sensor Symposium) , 2001 .

[79]  Suresh S. Jain,et al.  Determination of lead using a poly(vinyl chloride)-based crown ether membrane , 1995 .

[80]  M. J. Gismera,et al.  Copper(II) Ion-Selective Electrodes Based on Dithiosalicylic and Thiosalicylic Acids , 2003 .

[81]  A. Jain,et al.  An iron(III) ion-selective sensor based on a mu-bis(tridentate) ligand. , 2007, Talanta.

[82]  V. Gupta,et al.  Anion recognition through novel C-thiophenecalix[4]resorcinarene: PVC based sensor for chromate ions. , 2005, Talanta.

[83]  Ashutosh Kumar Singh,et al.  Comparative study of Ag(I) selective poly(vinyl chloride) membrane sensors based on newly developed Schiff-base lariat ethers derived from 4,13-diaza-18-crown-6. , 2009, Analytica chimica acta.

[84]  M. Ganjali,et al.  Fabrication of an iron(III)-selective PVC membrane sensor based on a bis-bidentate Schiff base ionophore , 2008 .

[85]  M. Hassouna,et al.  N,N′-Bis(3-methyl-1-phenyl-4-benzylidine-5-pyrazolone)propylenediamine Schiff base as a neutral carrier for silver (I) ion-selective electrodes , 2010 .

[86]  Heinrich Lang,et al.  Copper(II)-selective potentiometric sensors based on porphyrins in PVC matrix , 2006 .

[87]  K. G. Kumar,et al.  A PVC plasticized sensor for Ni(II) ion based on a simple ethylenediamine derivative. , 2006, Analytical sciences : the international journal of the Japan Society for Analytical Chemistry.

[88]  M. B. Saleh,et al.  Novel mercury (II) ion-selective polymeric membrane sensor based on ethyl-2-benzoyl-2-phenylcarbamoyl acetate. , 2000, Talanta.

[89]  A. Townshend.  Metals and their Compounds in the Environment. Occurrence, Analysis and Biological Relevance , 1993 .

[90]  S. Agarwal,et al.  Chromium(III)-selective sensor based on tri-o-thymotide in PVC matrix , 2006 .

[91]  R. Mahajan,et al.  A mercury(II) ion-selective electrode based on neutral salicylaldehyde thiosemicarbazone. , 2003, Talanta.

[92]  A. Abbaspour,et al.  Chromium(III) ion-selective electrode based on 4-dimethylaminoazobenzene. , 2001, Talanta.

[93]  M. Gholivand,et al.  Chromium(III) Ion Selective Electrode Based on Oxalic Acid Bis(Cyclohexylidene Hydrazide) , 2004 .

[94]  M. Ganjali,et al.  A novel iron (III)-PVC membrane potentiomeric sensor based on N-(2-hydroxyethyl)ethylenediamine-N,N',N"-triacetic acid , 2008 .

[95]  Archana Singh,et al.  Drug selective poly(vinyl chloride)-based sensor of desipramine hydrochloride , 2010 .

[96]  Ashutosh Kumar Singh,et al.  Comparative Studies of Tridentate Sulfur and Nitrogen‐Containing Ligands as Ionophores for Construction of Cadmium Ion‐Selective Membrane Sensors , 2007 .

[97]  H. Sharghi,et al.  Lead ion-selective membrane electrodes based on some recently synthesized 9,10-anthraquinone derivatives , 1998 .

[98]  Suresh S. Jain,et al.  A PVC‐based benzo‐15‐crown‐5 membrane sensor for cadmium , 1996 .

[99]  M. H. Mashhadizadeh,et al.  Asymmetrical Schiff Bases as Carriers in PVC Membrane Electrodes for Cadmium (II) Ions , 2005 .

[100]  A. Srivastava,et al.  Coated-wire iron(III) ion-selective electrode based on iron complex of 1,4,8,11-tetraazacyclotetradecane , 2005 .

[101]  Polymeric Membrane Silver-ion Selective Electrodes Based on Schiff Base N,N'-Bis(pyridin-2-ylmethylene)benzene-1,2-diamine , 2010 .

[102]  M. Ganjali,et al.  Determination of Hg(II) ions in water samples by a novel Hg(II) sensor, based on calix[4]arene derivative , 2009 .

[103]  L. Singh,et al.  Copper(II)-selective electrodes based on macrocyclic compounds , 1995 .

[104]  K. Gupta,et al.  Effect of concentration of ion exchanger, plasticizer and molecular weight of cyanocopolymers on selectivity and sensitivity of Cu(II) ion selective electrodes , 2001 .

[105]  K. Gupta,et al.  Cadmium Ion‐Selective Electrode Based on Cyanocopolymer , 2000 .

[106]  A. Kamel,et al.  Response Characteristics of Copper‐Selective Polymer Membrane Electrodes Based on a Newly Synthesized Macrocyclic Calix[4]arene Derivative as a Neutral Carrier Ionophore , 2010 .

[107]  A. Allafchian,et al.  Highly Selective Potentiometric Membrane Sensor for Hg(II) Based on Bis(Benzoyl Acetone) Diethylene Triamine , 2008, IEEE Sensors Journal.

[108]  M. B. Saleh.  Iron(III) ionophores based on formylsalicylic acid derivatives as sensors for ion-selective electrodes , 2000 .

[109]  L. Singh,et al.  A new cerium(IV) vanadate‐based solid membrane electrode for bismuth(III) , 1997 .

[110]  V. Gupta,et al.  A New Zn2+-Selective Sensor Based on 5,10,15,20-Tetraphenyl-21H,23H-porphine in PVC Matrix , 2001 .

[111]  M. Ganjali,et al.  Cr(III) Ion-Selective Membrane Sensor Based on 1,3-Diamino-2-Hydroxypropane-N,N,N′,N′ Tetraacetic Acid , 2007 .

[112]  Archana Singh,et al.  A novel potentiometric membrane sensor for determination of Co2+ based on 5-amino-3-methylisothiazole , 2007 .

[113]  L. Singh,et al.  Neutral carrier and organic resin based membranes as sensors for uranyl ions , 1995 .

[114]  Pankaj Kumar,et al.  Determination of Uranyl Ions Using Poly(vinyl chloride) Based 4-tert-Butylcalix[6]arene Membrane Sensor , 1999 .

[115]  M. Barzegar,et al.  A PVC-based capric acid membrane potentiometric sensor for lead(II) ions , 2001 .

[116]  M. Ganjali,et al.  Construction of Nickel (II) PVC Membrane Electrochemical Sensor Based on 5-Methoxy-5,6-Diphenyl-4,5 Dihydro-3(2H)-Pyridazinethione as a Novel Ionophore , 2008 .

[117]  Ayusman Sen,et al.  Novel process of incorporating silver biocides into polymers , 2008 .

[118]  C. Wardak.  A highly selective lead-sensitive electrode with solid contact based on ionic liquid. , 2011, Journal of hazardous materials.

[119]  R. Prasad,et al.  Metallo-tetraazaporphyrin based anion sensors: regulation of sensor characteristics through central metal ion coordination , 2004 .

[120]  M. H. Mashhadizadeh,et al.  A novel ion selective membrane potentiometric sensor for direct determination of Fe(III) in the presence of Fe(II). , 2004, Talanta.

[121]  R. Prasad,et al.  Dibenzocyclamnickel(II) as Ionophore in PVC-Matrix for Ni2+-Selective Sensor , 2002 .

[122]  Shiva Agarwal,et al.  A zinc-selective electrode based on N,N′-bis(acetylacetone)ethylenediimine , 2006 .

[123]  R. Goyal,et al.  Comparative studies of ONNO-based ligands as ionophores for palladium ion-selective membrane sensors. , 2009, Talanta.

[124]  V. Gupta,et al.  PVC based 5,10,15,20-tetrakis (4-methoxyphenyl) porphyrinatocobalt(II) membrane potentiometric sensor for arsenite. , 2005, Talanta.

[125]  S. Chung,et al.  Silver(I)-selective membrane electrodes based on sulfur-containing podands. , 1997, Talanta.

[126]  C. Wardak.  Cobalt(II) ion-selective electrode with solid contact , 2008 .

[127]  Anil K. Jain,et al.  Ni(II)-selective ion sensors of salen type Schiff base chelates , 2005 .

[128]  E. Foulkes.  Biological Effects of Heavy Metals , 1989 .

[129]  H. Fong,et al.  Rechargeable Antibacterial and Antifungal Polymeric Silver Sulfadiazines , 2009 .

[130]  A. Bharti,et al.  A novel ion selective sensor for promethium determination. , 2010, Analytica chimica acta.

[131]  W. Mahmoud,et al.  Iron ion-selective electrodes for direct potentiometry and potentiotitrimetry in pharmaceuticals , 2001 .

[132]  J. Jones,et al.  The handbook of trace elements , 1997 .

[133]  Ajay K. Jain,et al.  Porphyrins as carrier in PVC based membrane potentiometric sensors for nickel(II) , 1997 .

[134]  M. Shamsipur,et al.  Novel fluorimetric bulk optode membrane based on 5,8-bis((5'-chloro-8'-hydroxy-7'-quinolinyl)methyl)-2,11-dithia-5,8-diaza-2,6-pyridinophane for selective detection of lead(II) ions. , 2010, Talanta.

[135]  Vinod K. Gupta,et al.  Removal of endosulfan and methoxychlor from water on carbon slurry. , 2008, Environmental science & technology.

[136]  R. Goyal,et al.  Comparative studies of praseodymium(III) selective sensors based on newly synthesized Schiff's bases. , 2009, Analytica chimica acta.

[137]  Xiwen He,et al.  A lead ion-selective electrode based on a calixarene carboxyphenyl azo derivative , 2002 .

[138]  P. Bühlmann,et al.  Carrier-Based Ion-Selective Electrodes and Bulk Optodes. 2. Ionophores for Potentiometric and Optical Sensors. , 1998, Chemical reviews.

[139]  H. Sharghi,et al.  Cobalt(II)-selective membrane electrode based on a recently synthesized benzo-substituted macrocyclic diamide. , 2001, Analytical sciences : the international journal of the Japan Society for Analytical Chemistry.

[140]  A. Shockravi,et al.  Fabrication of a novel iron(III)-PVC membrane sensor based on a new 1,1'-(iminobis(methan-1-yl-1-ylidene))dinaphthalen-2-ol synthetic ionophore for direct and indirect determination of free iron species in some biological and non-biological samples. , 2010, Journal of hazardous materials.

[141]  Pankaj Kumar,et al.  New nickel(II) selective potentiometric sensor based on 5,7,12,14-tetramethyldibenzotetraazaannulene in a poly(vinyl chloride) matrix , 2000 .

[142]  Zhenning Yan,et al.  Silver ion-selective electrodes based on bis(dialkyldithiocarbamates) as neutral ionophores , 2007 .

[143]  Ashutosh Kumar Singh,et al.  Schiff bases as cadmium(II) selective ionophores in polymeric membrane electrodes. , 2007, Analytica chimica acta.

[144]  Ashutosh Kumar Singh,et al.  Tripodal chelating ligand-based sensor for selective determination of Zn(II) in biological and environmental samples , 2007, Analytical and bioanalytical chemistry.

[145]  S. Mittal,et al.  Potentiometric performance of 2-aminothiophenol based dipodal ionophore as a silver sensing material , 2007 .

[146]  M. Salavati‐Niasari,et al.  Copper Selective Electrode Based on 1,8-bis(2-Hydroxynap hthaldiminato)3,6-Dioxaoctane , 2006 .

[147]  M. P. Mahajan,et al.  2,6-bis-methylsulfanyl-[1,3,5]thiadiazine-4-thione as a Ag+-selective ionophore. , 2004, Analytical sciences : the international journal of the Japan Society for Analytical Chemistry.

[148]  Cobalt(II)-selective membrane sensor based on a [Me2(13)dieneN4] macrocyclic cobalt complex , 2006, Analytical and bioanalytical chemistry.

[149]  I. Mohammadpoor‐Baltork,et al.  Mercury selective membrane electrodes using 2-mercaptobenzimidazole, 2-mercaptobenzothiazole, and hexathiacyclooctadecane carriers , 2000 .

[150]  K. Girish Kumar,et al.  A PVC plasticized membrane sensor for nickel ions , 2006 .

[151]  Xiwen He,et al.  A mercury ion-selective electrode based on a calixarene derivative containing the thiazole azo group , 2003 .

[152]  Suresh S. Jain,et al.  Caesium PVC–crown (dibenzo-24-crown-8) based membrane sensor , 1995 .

[153]  Pankaj Kumar,et al.  PVC-based membranes of N,N' -dibenzyl -1,4,10,13 -tetraoxa -7,16 -diazacyclooctadecane as Pb(II)-selective sensor , 2006 .

[154]  A. Jain,et al.  A SOLID MEMBRANE SENSOR FOR HG2+ IONS , 1996 .

[155]  H. Sharghi,et al.  Highly Selective Chromium(III) PVC-Membrane Electrodes Based on Some Recently Synthesized Schiff's Bases , 2005 .

[156]  M. Surowiec,et al.  Calix[4]arene-dithiacrown ethers: synthesis and potentiometric membrane sensing of Hg2+ , 2010 .

[157]  H. Lang,et al.  Ni(2+) selective sensors based on meso-tetrakis-{4-[tris-(4-allyl dimethylsilyl-phenyl)-silyl]-phenyl}porphyrin and (sal)(2)trien in poly(vinyl chloride) matrix. , 2007, Talanta.

[158]  Sunita Kumar,et al.  Iron (III) Selective Electrode Based on S-Methyl N-(Methylcarbamoyloxy) Thioacetimidate as a Sensing Material , 2011, International Journal of Electrochemical Science.

[159]  V. Gupta,et al.  Electroanalytical studies on cobalt(II) selective potentiometric sensor based on bridge modified calixarene in poly(vinyl chloride) , 2008 .

[160]  M. Shamsipur,et al.  Cadmium ion-selective electrode based on tetrathia-12-crown-4. , 2001, Talanta.

[161]  Ashutosh Kumar Singh,et al.  Zn(II)‐Selective Membrane Electrode Based on Tetraazamacrocycle [Bzo2Me2Ph2(16)hexaeneN4] , 2006 .

[162]  L. Singh,et al.  Molybdate sensor based on 5,10,15,20-tetraphenylporphyrinatocobalt complex in a PVC matrix , 1999 .

[163]  Archana Singh,et al.  Cobalt(II)-selective electrode based on a newly synthesized macrocyclic compound , 2006 .

[164]  S. Hassan,et al.  Mercury(II) ion-selective polymeric membrane sensors for analysis of mercury in hazardous wastes. , 2006, Analytical sciences : the international journal of the Japan Society for Analytical Chemistry.

[165]  Ernö Pretsch,et al.  Carrier-Based Ion-Selective Electrodes and Bulk Optodes. 1. General Characteristics. , 1997, Chemical reviews.

[166]  J. Bobacka,et al.  New polyacrylate-based lead(II) ion-selective electrodes , 2009 .

[167]  Soraia Meghdadi,et al.  A Highly Selective Mercury(II) Ion-Selective Membrane Sensor , 2007 .

[168]  Ewa Bulska,et al.  Poly(n-butyl acrylate) based lead (II) selective electrodes. , 2009, Talanta.

[169]  M. Ganjali,et al.  Determination of zinc(II) ions in waste water samples by a novel zinc sensor based on a new synthesized Schiff's base , 2011 .

[170]  Vinod K. Gupta,et al.  Preparation of ethambutol-copper(II) complex and fabrication of PVC based membrane potentiometric sensor for copper. , 2003, Talanta.

[171]  A. Abbaspour,et al.  A highly selective and sensitive disposable carbon composite PVC-based membrane for determination of lead ion in environmental samples. , 2010, Journal of hazardous materials.

[172]  Mohamed A. F. Elmosallamy,et al.  Lead(II) Potentiometric Sensor Based on 1,4,8,11‐Tetrathiacyclotetradecane Neutral Carrier and Lipophilic Additives , 2008 .

[173]  Zaide Zhou,et al.  Mercury(II)-selective polymeric membrane electrode based on the 3-[4-(dimethylamino)phenyl]-5-mercapto-1,5-diphenylpentanone , 2007 .

[174]  Ashutosh Kumar Singh,et al.  A cerium(III) selective polyvinyl chloride membrane sensor based on a Schiff base complex of N,N'-bis[2-(salicylideneamino)ethyl]ethane-1,2-diamine. , 2006, Analytica chimica acta.

[175]  M. Shamsipur,et al.  A new PVC-based 1,10-dibenzyl-1,10-diaza-18-crown-6 selective electrode for detecting nickel(II)ion , 2000 .

[176]  E. Kılıç,et al.  Silver(I)‐Selective PVC Membrane Potentiometric Sensor Based on a Recently Synthesized Calix[4]arene , 2006 .

[177]  R. Conyers,et al.  Determination of silver in blood, urine, and tissues of volunteers and burn patients. , 1991, Clinical chemistry.

[178]  M. Ganjali,et al.  Determination of copper in black, red pepper and the waste water samples by a highly selective sensitive Cu(II) microelectrode based on a new hexadentates Schiff's base , 2006 .

[179]  A. Mittal,et al.  Adsorption of basic fuchsin using waste materials--bottom ash and deoiled soya--as adsorbents. , 2008, Journal of colloid and interface science.

[180]  Ashutosh Kumar Singh,et al.  Nano level detection of Cd(II) using poly(vinyl chloride) based membranes of Schiff bases. , 2009, Analytica chimica acta.

[181]  M. K. Rofouei,et al.  Mercury(II) selective membrane electrode based on 1,3-bis(2-methoxybenzene)triazene , 2009 .

[182]  Terence E. Rice,et al.  Signaling Recognition Events with Fluorescent Sensors and Switches. , 1997, Chemical reviews.

[183]  M. Bagheri,et al.  Hg2+‐Selective Membrane Potentiometric Sensor Based on a Recently Synthesized Mercapto Compound , 2003 .

[184]  V. Gupta,et al.  Advances in water treatment by adsorption technology , 2006, Nature Protocols.

[185]  A. Jain,et al.  A PVC Based Hematoporphyrin IX Membrane Potentiometric Sensor for Zinc(II) , 2002 .

[186]  O. Sánchez,et al.  Mercury(II) ion-selective electrode. Study of 1,3-diphenylthiourea as ionophore , 2000 .

[187]  H. Sharghi,et al.  Zinc-selective membrane potentiometric sensor based on a recently synthesized benzo-substituted macrocyclic diamide , 1999 .

[188]  Soraia Meghdadi,et al.  Sensitive cadmium potentiometric sensor based on 4-hydroxy salophen as a fast tool for water samples analysis , 2009 .

[189]  Ashutosh Kumar Singh,et al.  Electroanalytical performance of a terbium(III)-selective sensor based on a neutral ionophore in environmental and medicinal samples , 2008, Analytical and bioanalytical chemistry.

[190]  Vinod K. Gupta,et al.  Chloride selective potentiometric sensor based on a newly synthesized hydrogen bonding anion receptor , 2009 .

[191]  R. Ludwig,et al.  Anion recognition through modified calixarenes: a highly selective sensor for monohydrogen phosphate , 2005 .

[192]  Ashutosh Kumar Singh,et al.  Chromium(III)-selective electrode based on a macrocyclic compound , 1999 .

[193]  S. Chandra,et al.  PVC-based heterogeneous chelating inorganic exchanger membrane as sensors for the determination of zinc(II) ions , 2006 .

[194]  S. Jeon,et al.  Polymeric Lead(II)-selective Electrode Based on N,N'-Bis-thiophen-2-ylmethylene-pyridine-2,6-diamine as an Ion Carrier , 2007 .

[195]  H. Khani,et al.  Multi-walled carbon nanotubes-ionic liquid-carbon paste electrode as a super selectivity sensor: application to potentiometric monitoring of mercury ion(II). , 2010, Journal of hazardous materials.

[196]  M. Shamsipur,et al.  Cadmium(II)-selective membrane electrode based on a synthesized tetrol compound , 2000 .

[197]  G. Shen,et al.  5,10,15-Tris(pentafluorophenyl)corrole as highly selective neutral carrier for a silver ion-sensitive electrode , 2006 .

[198]  Mei-Rong Huang,et al.  Lead(II) ion-selective electrode based on polyaminoanthraquinone particles with intrinsic conductivity. , 2009, Talanta.

[199]  S. Mittal,et al.  Potentiometric studies of N,N′-Bis(2-dimethylaminoethyl)-N,N′-dimethyl-9,10 anthracenedimethanamine as a chemical sensing material for Zn(II) ions , 2008 .

[200]  E. Merian,et al.  Metals and their compounds in the environment: Occurrence, analysis, and biological relevance , 1991 .

[201]  M. H. Mashhadizadeh,et al.  Nickel(II)-selective membrane potentiometric sensor using a recently synthesized Schiff base as neutral carrier , 2003 .

[202]  A. Cukurovali,et al.  A highly sensitive and selective fluorescent sensor for the determination of copper(II) based on a schiff base , 2009 .

[203]  Mojtaba Shamsipur,et al.  Lead-selective poly(vinyl chloride) electrodes based on some synthesized benzo-substituted macrocyclic diamides. , 2009, Journal of hazardous materials.

[204]  A. Pombeiro,et al.  Poly(vinyl) chloride membrane copper-selective electrode based on 1-phenyl-2-(2-hydroxyphenylhydrazo)butane-1,3-dione. , 2011, Journal of hazardous materials.

[205]  A. Abbaspour,et al.  Copper(II)-selective electrode based on dithioacetal , 2002 .

[206]  M. K. Amini,et al.  Pentacyclooctaaza as a neutral carrier in coated-wire ion-selective electrode for nickel(II) , 2002 .

[207]  Ashutosh Kumar Singh,et al.  Selective electrochemical sensor for copper (II) ion based on chelating ionophores. , 2006, Analytica chimica acta.