Productivity Gains in Flexible Robotic Cells

Flexible robotic cells combine the capabilities of robotic flow shops with those of flexible manufacturing systems. In an m-machine flexible cell, each part visits each machine in the same order. However, the m operations can be performed in any order, and each machine can be configured to perform any operation. We derive the maximum percentage increase in throughput that can be achieved by changing the assignment of operations to machines. We find that no increase can be gained in two-machine cells, and the gain in threeand four-machine cells each is at most 14 7 %. For this calculation, the assignment remains constant throughout a lot’s processing. Additionally, we determine the throughput increase that can be gained by varying the assignment of operations to machines for successive parts within a processing lot.

[1]  Chelliah Sriskandarajah,et al.  Scheduling in robotic cells , 1994 .

[2]  Joe H. Mize,et al.  Scheduling and control of flexible manufacturing systems: a critical review , 1994 .

[3]  Yves Crama,et al.  Cyclic scheduling in 3-machine robotic flow shops , 1999 .

[4]  Chelliah Sriskandarajah,et al.  Scheduling in Dual Gripper Robotic Cells for Productivity Gains , 2001, IEEE Trans. Robotics Autom..

[5]  Kathryn E. Stecke,et al.  Design, planning, scheduling, and control problems of flexible manufacturing systems , 1985 .

[6]  Qi Su,et al.  Optimal sequencing of double-gripper gantry robot moves in tightly-coupled serial production systems , 1996, IEEE Trans. Robotics Autom..

[7]  Wieslaw Kubiak,et al.  Sequencing of parts and robot moves in a robotic cell , 1992 .

[8]  H. Neil Geismar,et al.  Sequencing and Scheduling in Robotic Cells: Recent Developments , 2005, J. Sched..

[9]  E.L. Lawler,et al.  Optimization and Approximation in Deterministic Sequencing and Scheduling: a Survey , 1977 .

[10]  Yves Crama,et al.  Cyclic scheduling in robotic flowshops , 2000, Ann. Oper. Res..

[11]  Werner Krabs,et al.  Optimization and approximation , 1979 .

[12]  H. Neil Geismar,et al.  Dominance of Cyclic Solutions and Challenges in the Scheduling of Robotic Cells , 2005, SIAM Rev..

[13]  Chelliah Sriskandarajah,et al.  Scheduling in robotic cells: Complexity and steady state analysis , 1998, Eur. J. Oper. Res..

[14]  C. Ray Asfahl Robots and manufacturing automation , 1985 .

[15]  Suresh P. Sethi,et al.  Flexibility in manufacturing: A survey , 1990 .

[16]  G. Finke,et al.  Cycles and permutations in robotic cells , 2001 .

[17]  C. M. Harmonosky,et al.  Real-time scheduling in computer integrated manufacturing: a review of recent research , 1991 .

[18]  Richard Kendall Miller Fms/Cim Systems Integration Handbook , 1989 .

[19]  Yves Crama,et al.  Cyclic Scheduling of Identical Parts in a Robotic Cell , 1997, Oper. Res..

[20]  Chelliah Sriskandarajah,et al.  Scheduling Multiple Parts in a Robotic Cell Served by a Dual-Gripper Robot , 2004, Oper. Res..

[21]  Gerd Finke,et al.  On A Conjecture About Robotic Cells: New Simplified Proof For The Three-Machine Case , 1999 .

[22]  Ram Rachamadugu,et al.  Classification and review of FMS scheduling procedures , 1994 .

[23]  Chelliah Sriskandarajah,et al.  Scheduling in Robotic Cells: Classification, Two and Three Machine Cells , 1997, Oper. Res..

[24]  Chelliah Sriskandarajah,et al.  Scheduling in Robotic Cells: Heuristics and Cell Design , 1999, Oper. Res..

[25]  Chelliah Sriskandarajah,et al.  Scheduling large robotic cells without buffers , 1998, Ann. Oper. Res..

[26]  Ari K. Jónsson,et al.  Cyclic Scheduling , 1999, IJCAI.

[27]  Charles R. Standridge,et al.  Modeling and Analysis of Manufacturing Systems , 1993 .