Design, fabrication, simulation and testing of an ocean wave energy converter with mechanical motion rectifier

Abstract Many wave energy converters have been developed in the past century with various power takeoff systems, including those devices with air turbines, linear electromagnetic motors, and hydroelectric components. Although these systems have their own advantages, power takeoffs are still recognized as the most important challenge in ocean wave energy technology. In this paper, a mechanical motion rectifier (MMR) based power takeoff system is proposed and prototyped for wave energy converter. This power takeoff system can convert the bidirectional wave motion into unidirectional rotation of generator by integrating two one-way bearings into a rack pinion system. A wave energy converter which contains a 1.2 m buoy and MMR based power takeoff system was designed and fabricated in this paper. The models of power takeoff system and single-body wave energy converter were built and analyzed. The simulation results in regular wave show that MMR based power takeoff can produce more power comparing with linear damping power takeoff system and the optimal PTO damping of MMR system is smaller than that of linear damping system. Lab testing of power takeoff mechanism and ocean testing of the overall ocean wave converter system were also conducted to validate the concept of MMR design. The disengagement and engagement of one-way bearings in the mechanical motion rectifier system were verified in both lab and ocean test.

[1]  R.P.F. Gomes,et al.  The dynamics and power extraction of bottom-hinged plate wave energy converters in regular and irregular waves , 2015 .

[2]  Aurélien Babarit,et al.  Numerical benchmarking study of a selection of wave energy converters , 2012 .

[3]  Mats Leijon,et al.  Experimental results of rectification and filtration from an offshore wave energy system , 2009 .

[4]  A. Clément,et al.  Wave energy in Europe: current status and perspectives , 2002 .

[5]  Bradley J. Buckham,et al.  Experimental and numerical comparisons of self-reacting point absorber wave energy converters in regular waves , 2015 .

[6]  Yung-Lien Wang.  A wave energy converter with magnetic gear , 2015 .

[7]  G. S. Bikas,et al.  Study on performance of Savonius rotor type wave energy converter used in conjunction conventional rubble mound breakwater , 2014 .

[8]  António F.O. Falcão,et al.  Nonlinear dynamics of a tightly moored point-absorber wave energy converter , 2013 .

[9]  J. Falnes.  Ocean Waves and Oscillating Systems: Linear Interactions Including Wave-Energy Extraction , 2002 .

[10]  Raymond Alcorn,et al.  Case study feasibility analysis of the Pelamis wave energy convertor in Ireland, Portugal and North America , 2010 .

[11]  Torgeir Moan,et al.  Analysis of a Two-Body Floating Wave Energy Converter With Particular Focus on the Effects of Power Take-Off and Mooring Systems on Energy Capture , 2013 .

[12]  Carolyn Q. Judge,et al.  Mass-modulation schemes for a class of wave energy converters: Experiments, models, and efficacy , 2015 .

[13]  Lei Zuo,et al.  High Efficiency Electromagnetic Energy Harvester for Railroad Application , 2013 .

[14]  Edgar Mendoza,et al.  Hydrodynamic behavior of a new wave energy convertor: The Blow-Jet , 2015 .

[15]  Mats Leijon,et al.  Lysekil Research Site, Sweden : A status update , 2011 .

[16]  Matthew Folley,et al.  The design of small seabed-mounted bottom-hinged wave energy converters , 2007 .

[17]  T.J.T. Whittaker,et al.  The design, construction and operation of the LIMPET wave energy converter (Islay, Scotland)[Land Installed Marine Powered Energy Transformer] , 2001 .

[18]  M. Leijon,et al.  Experimental results from sea trials of an offshore wave energy system , 2007 .

[19]  Ted K.A. Brekken,et al.  Ocean wave energy overview and research at Oregon State University , 2009, 2009 IEEE Power Electronics and Machines in Wind Applications.

[20]  J. Scruggs,et al.  Harvesting Ocean Wave Energy , 2009, Science.

[21]  Rocco Vertechy,et al.  Parallelogram-shaped dielectric elastomer generators: Analytical model and experimental validation , 2015 .

[22]  Ross Henderson,et al.  Design, simulation, and testing of a novel hydraulic power take-off system for the Pelamis wave energy converter , 2006 .

[23]  Guillaume Ardoise,et al.  Standing wave tube electro active polymer wave energy converter , 2012, Smart Structures.

[24]  Robert Banasiak,et al.  Modelling of hydraulic performance and wave energy extraction by a point absorber in heave , 2004 .

[25]  L. Zuo,et al.  Energy-harvesting shock absorber with a mechanical motion rectifier , 2013 .

[26]  Dino Zorbas.  Electric Machines: Principles, Applications, and Control Schematics , 1989 .

[27]  António F.O. Falcão,et al.  Wave energy utilization: A review of the technologies , 2010 .

[28]  Matthew Folley,et al.  Overview and Initial Operational Experience of the LIMPET Wave Energy Plant , 2002 .

[29]  Rocco Vertechy,et al.  Reduced Model and Application of Inflating Circular Diaphragm Dielectric Elastomer Generators for Wave Energy Harvesting , 2015 .

[30]  Benedikt Scherber,et al.  Electroactive polymers for gaining sea power , 2013, Smart Structures.

[31]  Solomon C. Yim,et al.  Design, construction, and ocean testing of a taut-moored dual-body wave energy converter with a linear generator power take-off , 2010 .

[32]  M. Leijon,et al.  Wave Energy from the North Sea: Experiences from the Lysekil Research Site , 2008 .