Fabrication and characterization of high-resolution AFM tips with high-quality double-wall carbon nanotubes

Double-wall carbon nanotubes (DWNTs) have been successfully used as AFM tips. DWNT tips have been found to possess great advantages over multi-wall CNT- and single-wall CNT-tips in terms of a unique combination of high resolution and high aspect ratio imaging together with a longer lifetime of the tip. The high quality DWNTs prepared by the high-temperature discharge method is attached to the AFM tip by manipulation during SEM observation. The comparison with DWNT tips and other conventional tips shows that the DWNT tip manufactured in the present study has the high lateral resolution on nanomaterials such as single-wall carbon nanotubes.

[1]  P. Markiewicz,et al.  Simulation of atomic force microscope tip–sample/sample–tip reconstruction , 1995 .

[2]  Makoto Ishikawa,et al.  A study of friction by carbon nanotube tip , 2002 .

[3]  Charles M. Lieber,et al.  High-yield assembly of individual single-walled carbon nanotube tips for scanning probe microscopies , 2001 .

[4]  A. Maiti,et al.  Structural flexibility of carbon nanotubes , 1996 .

[5]  A. Charlier,et al.  Classification for double-walled carbon nanotubes , 1999 .

[6]  A. Alivisatos,et al.  Collective behaviour in two-dimensional cobalt nanoparticle assemblies observed by magnetic force microscopy , 2004, Nature materials.

[7]  T. Ebbesen,et al.  Exceptionally high Young's modulus observed for individual carbon nanotubes , 1996, Nature.

[8]  T. Okazaki,et al.  New Synthesis of High-Quality Double-Walled Carbon Nanotubes by High-Temperature Pulsed Arc Discharge , 2003 .

[9]  Philip Kim,et al.  Single-walled carbon nanotube probes for high-resolution nanostructure imaging , 1998 .

[10]  C. Mao,et al.  Tensegrity: construction of rigid DNA triangles with flexible four-arm DNA junctions. , 2004, Journal of the American Chemical Society.

[11]  S. Akita,et al.  Carbon nanotube tips for a scanning probe microscope: their fabrication and properties , 1999 .

[12]  Martha I. Sanchez,et al.  Carbon nanotube scanning probe for profiling of deep-ultraviolet and 193 nm photoresist patterns , 2002 .

[13]  P. Ramesh,et al.  Selective chemical vapor deposition synthesis of double-wall carbon nanotubes on mesoporous silica. , 2005, The journal of physical chemistry. B.

[14]  Y. Hirai,et al.  Molecular Dynamics Studies on Mechanical Properties of Carbon Nano Tubes with Pinhole Defects , 2002, 2002 International Microprocesses and Nanotechnology Conference, 2002. Digest of Papers..

[15]  Y. Saito,et al.  Growth conditions of double-walled carbon nanotubes in arc discharge , 2003 .

[16]  M. Meyyappan,et al.  Large-Scale Fabrication of Carbon Nanotube Probe Tips for Atomic Force Microscopy Critical Dimension Imaging Applications , 2004 .

[17]  S. Quake,et al.  Correlating AFM Probe Morphology to Image Resolution for Single-Wall Carbon Nanotube Tips , 2004 .

[18]  Phaedon Avouris,et al.  Deformation of carbon nanotubes by surface van der Waals forces , 1998 .

[19]  Charles M. Lieber,et al.  Single-Walled Carbon Nanotube AFM Probes: Optimal Imaging Resolution of Nanoclusters and Biomolecules in Ambient and Fluid Environments , 2004 .

[20]  M. Meyyappan,et al.  How does a multiwalled carbon nanotube atomic force microscopy probe affect the determination of surface roughness statistics , 2002 .

[21]  Seiji Akita,et al.  Carbon-nanotube tips for scanning probe microscopy: Preparation by a controlled process and observation of deoxyribonucleic acid , 1999 .

[22]  Riichiro Saito,et al.  Anomalous potential barrier of double-wall carbon nanotube , 2001 .

[23]  H. Dai,et al.  Nanotubes as nanoprobes in scanning probe microscopy , 1996, Nature.

[24]  Seiji Akita,et al.  RAPID COMMUNICATION: Orientation and purification of carbon nanotubes using ac electrophoresis , 1998 .