Formation of Hydroxyapatite Layer on Ti-6Al-4V ELI Alloy by Fine Particle Peening

[1]  潤 小茂鳥,et al.  Ti-6Al-4V 合金の大気酸化挙動に及ぼす微粒子ピーニングの影響 , 2015 .

[2]  L. Sexton,et al.  Deposition of substituted apatites onto titanium surfaces using a novel blasting process , 2009 .

[3]  K. Asaoka,et al.  Blast coating method: new method of coating titanium surface with hydroxyapatite at room temperature. , 1997, Journal of biomedical materials research.

[4]  Kaan Erkorkmaz,et al.  Machining Porous Calcium Polyphosphate Implants for Tissue Engineering Applications , 2010, Int. J. Autom. Technol..

[5]  Y. Kameyama,et al.  Effect of fine particle peening using carbon-black/steel hybridized particles on tribological properties of stainless steel , 2014 .

[6]  Hitoshi Ohmori,et al.  Fabrication of micro-textured and plateau-processed functional surface by angled fine particle peening followed by precision grinding , 2015 .

[7]  B. Previtali,et al.  High tolerance plasma arc cutting of commercially pure titanium , 2005 .

[8]  T. Kuriyagawa,et al.  Characteristics of hydroxyapatite film formed on human enamel with the powder jet deposition technique. , 2011, Journal of biomedical materials research. Part B, Applied biomaterials.

[9]  Takashi Nakamura,et al.  Surface potential change in bioactive titanium metal during the process of apatite formation in simulated body fluid. , 2003, Journal of biomedical materials research. Part A.

[10]  Y. Yokogawa,et al.  Bond strength improvement of hydroxyapatite/titanium composite coating by partial nitriding during RF-thermal plasma spraying , 2003 .

[11]  Yuki Nakamura,et al.  Effect of shot peening using ultra-fine particles on fatigue properties of 5056 aluminum alloy under rotating bending , 2016 .

[12]  T. Kuriyagawa,et al.  Effect of hydroxyapatite film formed by powder jet deposition on dentin permeability. , 2012, European journal of oral sciences.

[13]  J. Kärrholm,et al.  Effects of hydroxyapatite coating of cups used in hip revision arthroplasty , 2012, Acta orthopaedica.

[14]  H. Rack,et al.  Titanium alloys in total joint replacement--a materials science perspective. , 1998, Biomaterials.

[15]  B. Castanié,et al.  Influence of Machining Process and Machining Induced Surface Roughness on Mechanical Properties of Continuous Fiber Composites , 2015 .

[16]  Q. Luo,et al.  High-precision determination of residual stress of polycrystalline coatings using optimised XRD-sin2ψ technique , 2010 .

[17]  J. Komotori,et al.  Effect of micro ploughing during fine particle peening process on the microstructure of metallic materials , 2009 .

[18]  Y. Ueyama,et al.  Initial tissue response to a titanium implant coated with apatite at room temperature using a blast coating method. , 2002, Biomaterials.

[19]  Masayoshi Mizutani,et al.  Improved Cytocompatibility of Nanosecond-Pulsed Laser-Treated Commercially Pure Ti Surfaces , 2014, Int. J. Autom. Technol..

[20]  H. Akebono,et al.  Surface modification of carbon steel by atmospheric-controlled IH-FPP treatment using mixed chromium and high-speed steel particles , 2016 .

[21]  Brad L. Boyce,et al.  Effect of load ratio and maximum stress intensity on the fatigue threshold in Ti–6Al–4V , 2001 .

[22]  Robert B. Heimann,et al.  Thermal spraying of biomaterials , 2006 .

[23]  R. Ritchie,et al.  Influence of microstructure on high-cycle fatigue of Ti-6Al-4V: Bimodal vs. lamellar structures , 2002 .

[24]  Y. Mutoh,et al.  Acoustic emission and fatigue damage induced in plasma-sprayed hydroxyapatite coating layers. , 2012, Journal of the mechanical behavior of biomedical materials.

[25]  D. Eifler,et al.  Analysis of fatigue properties and failure mechanisms of Ti6Al4V in the very high cycle fatigue regime using ultrasonic technology and 3D laser scanning vibrometry. , 2013, Ultrasonics.

[26]  Tadashi Kokubo,et al.  Spontaneous Formation of Bonelike Apatite Layer on Chemically Treated Titanium Metals , 1996 .

[27]  Y. Mutoh,et al.  Failure behavior of plasma-sprayed HAp coating on commercially pure titanium substrate in simulated body fluid (SBF) under bending load. , 2012, Journal of the mechanical behavior of biomedical materials.

[28]  S. Kikuchi,et al.  Analysis of pneumatic fine particle peening process by using a high-speed-camera , 2010 .

[29]  P. A. Blenkinsop,et al.  Internal fatigue origins in α-β titanium allols , 1976 .

[30]  F. Eyma,et al.  Study of trimming damages of CFRP structures in function of the machining processes and their impact on the mechanical behavior , 2014 .

[31]  Yuki Nakamura,et al.  Characterization of the hydroxyapatite layer formed by fine hydroxyapatite particle peening and its effect on the fatigue properties of commercially pure titanium under four-point bending , 2016 .

[32]  E. van der Velde,et al.  In vivo tensile testing of fluorapatite and hydroxylapatite plasma-sprayed coatings. , 1994, Journal of biomedical materials research.

[33]  Y. Nakai,et al.  Effect of harmonic structure design with bimodal grain size distribution on near-threshold fatigue crack propagation in Ti–6Al–4V alloy , 2016 .

[34]  S. Kikuchi,et al.  Increasing Surface Hardness of AISI 1045 Steel by AIH-FPP/Plasma Nitriding Treatment , 2013 .

[35]  R. Reis,et al.  Crystallinity and structural changes in HA plasma-sprayed coatings induced by cyclic loading in physiological media , 1996 .

[36]  T. Morita,et al.  Effects of Fine Particle Bombarding on Surface Characteristics and Fatigue Strength of Commercial Pure Titanium , 2012 .

[37]  S. M. Wong.  Residual stress measurements on chromium films by x-ray diffraction using the sin2ψ method , 1978 .

[38]  S. Komarov,et al.  Fabrication of hydroxyapatite coatings by the ball impact process , 2012 .

[39]  T. Morita,et al.  Effect of combination treatment on wear resistance and strength of Ti–6Al–4V alloy , 2014 .