The use of computer simulation in the evaluation of electric vehicle batteries

Abstract An integrated simulation and testing approach is presented to evaluate batteries for electric vehicle (EV) applications. This new approach combines traditional experimental testing with computer simulations to create a cost-effective means to evaluate EV batteries and provide important information that is difficult or impossible to obtain from purely experimental measurements. The present simulators for the lead–acid and nickel–metal hydride (Ni–MH) batteries are developed based on the fundamental principles governing their electrochemical behaviors and are created using an advanced computational fluid dynamics (CFD) technique. Computer simulations are validated by experimental data under the dynamic stress test (DST) procedure for a lead–acid battery module and a Ni–MH cell with good agreement. Moreover, computer simulations reveal that the studied lead–acid battery underutilizes the active material by as much as 70% and the MH electrode of the Ni–MH cell is overdesigned by about 30% under the simulated EV duty. Therefore, there is good potential of increasing the specific energy and reducing the cost if batteries are optimized for EVs using a simulation-based design approach.

[1]  Bor Yann Liaw,et al.  Micro‐Macroscopic Coupled Modeling of Batteries and Fuel Cells II. Application to Nickel‐Cadmium and Nickel‐Metal Hydride Cells , 1998 .

[2]  Chaoyang Wang,et al.  Micro‐Macroscopic Coupled Modeling of Batteries and Fuel Cells I. Model Development , 1998 .

[3]  Marc Doyle,et al.  The Use of Mathematical-Modeling in the Design of Lithium Polymer Battery Systems , 1995 .

[4]  P. Ekdunge,et al.  A simplified model of the lead/acid battery , 1993 .

[5]  Ralph E. White,et al.  The Effects of Separator Design on the Discharge Performance of a Starved Lead‐Acid Cell , 1990 .

[6]  Kathryn A. Striebel,et al.  Laboratory-scale evaluation of secondary alkaline zinc batteries for electric vehicles , 1994 .

[7]  Anthony F. Hollenkamp,et al.  Evaluation of lead/acid batteries under simulated electric-vehicle duty: development of design parameters on the basis of SFUDS performance , 1996 .

[8]  Ralph E. White,et al.  Mathematical Modeling for the Discharge of a Metal Hydride Electrode , 1995 .

[9]  Chaoyang Wang,et al.  Numerical Modeling of Coupled Electrochemical and Transport Processes in Lead‐Acid Batteries , 1997 .

[10]  M. Barak,et al.  Power Sources 4 , 1974 .

[11]  Mario Maja,et al.  A simplified model of the lead-acid battery , 1990 .

[12]  W. Gu,et al.  Micro-Macroscopic Coupled Modeling of Batteries and Fuel Cells Part 1 . Model Development , 1998 .

[13]  D. D. Brandt,et al.  Driving cycle testing of electric vehicle batteries and systems , 1992 .

[14]  S. Patankar.  Numerical Heat Transfer and Fluid Flow , 2018, Lecture Notes in Mechanical Engineering.

[15]  John Newman,et al.  Mathematical modeling of phenomena contributing to thermal rise in lead-acid batteries used in electric vehicles , 1984 .

[16]  James W. Evans,et al.  Three‐Dimensional Thermal Modeling of Lithium‐Polymer Batteries under Galvanostatic Discharge and Dynamic Power Profile , 1994 .

[17]  E. Karden,et al.  Electrochemical modelling of lead/acid batteries under operating conditions of electric vehicles , 1997 .

[18]  Thomas Lalk,et al.  Comparison of advanced battery technologies for electric vehicles , 1993 .

[19]  Ralph E. White,et al.  Mathematical Modeling of a Nickel‐Cadmium Cell: Proton Diffusion in the Nickel Electrode , 1995 .

[20]  Bor Yann Liaw,et al.  Numerical simulation of coupled electrochemical and transport processes in battery systems , 1997, IECEC-97 Proceedings of the Thirty-Second Intersociety Energy Conversion Engineering Conference (Cat. No.97CH6203).

[21]  B. L. McKinney,et al.  The impact of urban driving schedules on the thermal management of lead-acid batteries for electric vehicles , 1984 .