Cavitation and primary atomization in real injectors at low injection pressure condition

[1]  M. Michard,et al.  Shadowgraph, Schlieren and interferometry in a 2D cavitating channel flow , 2012 .

[2]  S. Idlahcen,et al.  Diesel spray velocity and break-up characterization with dense spray imaging , 2012 .

[3]  Tracie Barber,et al.  Periodic cavitation shedding in a cylindrical orifice , 2011 .

[4]  C. Carter,et al.  Fast-framing ballistic imaging of velocity in an aerated spray. , 2009, Optics letters.

[5]  Manolis Gavaises,et al.  Characterization of string cavitation in large-scale Diesel nozzles with tapered holes , 2009 .

[6]  M. Gavaises,et al.  Vortex flow and cavitation in diesel injector nozzles , 2008, Journal of Fluid Mechanics.

[7]  Christophe Dumouchel,et al.  On the experimental investigation on primary atomization of liquid streams , 2008 .

[8]  Akio Tomiyama,et al.  Effects of cavitation in a nozzle on liquid jet atomization , 2007 .

[9]  Daniel D. Joseph,et al.  Cavitation in an orifice flow , 2007 .

[10]  F. J. Salvador,et al.  Using spray momentum flux measurements to understand the influence of diesel nozzle geometry on spray characteristics , 2005 .

[11]  J. Chomiak,et al.  Cavitation: a contributory factor in the transition from symmetric to asymmetric jets in cross-flow nozzles , 2004 .

[12]  Raul Payri,et al.  The influence of cavitation on the internal flow and the spray characteristics in diesel injection nozzles , 2004 .

[13]  Yasuhiro Saito,et al.  Unstable Cavitation Behavior in a Circular-Cylindrical Orifice Flow , 2002 .

[14]  Manolis Gavaises,et al.  Visualisation of cavitation in diesel engine injectors , 2001 .

[15]  Alfred Leipertz,et al.  Investigation of cavitation in real size diesel injection nozzles , 1999 .

[16]  P.-K. Wu,et al.  AERODYNAMIC EFFECTS ON PRIMARY BREAKUP OF TURBULENT LIQUIDS , 1993 .

[17]  P.-K. Wu,et al.  Primary breakup in gas/liquid mixing layers for turbulent liquids , 1992 .

[18]  A. Lefebvre.  Atomization and Sprays , 1988 .

[19]  R. Reitz,et al.  Mechanism of atomization of a liquid jet , 1982 .

[20]  Keiya Nishida,et al.  Characteristics of the Internal Flow in a Diesel Injection Nozzle , 2023, Proceedings of the Seventh International Conference on Liquid Atomization and Spray Systems.

[21]  R. Payri,et al.  Study of the influence of internal flow on the spray behavior under cavitating conditions using a transparent nozzle , 2012 .

[22]  Raditya Hendra Pratama,et al.  Cavitation Flow in Nozzle of Liquid Injector , 2012 .

[23]  Manolis Gavaises,et al.  INFLUENCE OF VORTEX FLOW AND CAVITATION ON NEAR-NOZZLE DIESEL SPRAY DISPERSION ANGLE , 2009 .

[24]  S. Collicott,et al.  VISUALIZATION OF CAVITATION IN HIGH-PRESSURE DIESEL FUEL INJECTOR ORIFICES , 2006 .

[25]  Raul Payri,et al.  Experimental characterization of internal nozzle flow and diesel spray behavior. Part I: Nonevaporative conditions , 2005 .

[26]  C. Soteriou,et al.  Through the Diesel Nozzle Hole-A Journey of Discovery II , 2001 .

[27]  Masanori Shimizu,et al.  EFFECTS OF CAVITATION AND INTERNAL FLOW ON ATOMIZATION OF A LIQUID JET , 1998 .

[28]  W. T. Rawlins,et al.  A COMPARATIVE STUDY OF ROOM-TEMPERATURE AND COMBUSTING FUEL SPRAYS NEAR THE INJECTOR TIP USING INFRARED LASER DIAGNOSTICS , 1998 .

[29]  Francisco Ruiz,et al.  EFFECT OF CAVITATION ON FLOW AND TURBULENCE IN PLAIN ORIFICES FOR HIGH-SPEED ATOMIZATION , 1995 .

[30]  H. Hiroyasu,et al.  Break-up Length of a Liquid Jet and Internal Flow in a Nozzle , 1991 .

[31]  Arthur H. Lefebvre,et al.  GEOMETRICAL EFFECTS ON DISCHARGE COEFFICIENTS FOR PLAIN-ORIFICE ATOMIZERS , 1991 .

[32]  Takao Karasawa,et al.  EFFECT OF NOZZLE CONFIGURATION ON THE ATOMIZATION OF A STEADY SPRAY , 1991 .

[33]  Hiroyuki Hiroyasu,et al.  Break-up length and spray angle in high speed jets. , 1985 .