Numerical simulation of heat distribution in RGO-contacted perovskite solar cells using COMSOL

Abstract A 3D simulation of optical photogenreation, electrical characteristics, and thermal/heat distribution across the structure of a perovskite solar cell with a reduced graphene oxide (RGO) contact is presented. COMSOL Multiphysics package has been used to solve the coupled optical-electrical-thermal modules for this hybrid cell where the RGO added as the bottom electrode instead of a conventional metallic contact to enhance the heat dissipation towards a higher device stability. The Wave Optic module, Semiconductor module, and Heat Transfer in Solid module were coupled and solved for the proper input parameter values taken from relevant literature. The optical photogeneration, current-voltage characteristics, electric-field and the thermal maps of the cell are presented. The RGO contact doesn’t significantly impact on the optical and electrical output of the cell, but it accelerates the heat dissipation. The heat is mainly generated across the cell from the light absorption, Shockley-Read-Hall non-radiative recombination, and Joule heating. Compared to the cell with the Au electrode, the RGO contacted cell is showing a minimized heat accumulation and gradient at the bottom junction of the RGO/Spiro interface which promises a thermal stability of the cell. The nan-radiative and joule heat distribution also show a moderated density for the RGO contacted cell which are assigned to the high heat conductivity of the RGO layer compared to traditional metallic electrodes. Our simulations results are of the rarely presented thermal simulations for such devices and prove the superiority of graphene over plane metallic contacts for heat dissipation and thermodynamic aspect of a solar cell.

[1]  Jing Jing Yang,et al.  A Review of Computational Electromagnetic Methods for Graphene Modeling , 2016 .

[2]  E. Kymakis,et al.  Efficient and Highly Air Stable Planar Inverted Perovskite Solar Cells with Reduced Graphene Oxide Doped PCBM Electron Transporting Layer , 2017 .

[3]  D. Kotchetkov,et al.  Simulation of Heat Conduction in Suspended Graphene Flakes of Variable Shapes , 2008 .

[4]  Min Seok Jang,et al.  Highly confined tunable mid-infrared plasmonics in graphene nanoresonators. , 2013, Nano letters.

[5]  Xiaofeng Li,et al.  Photovoltaic Devices: Opto‐Electro‐Thermal Physics and Modeling , 2017, Advanced materials.

[6]  Yunlin Chen,et al.  Optimal Design and Simulation of High-Performance Organic-Metal Halide Perovskite Solar Cells , 2016, IEEE Journal of Quantum Electronics.

[7]  Jürgen Schumacher,et al.  Coupled Optical and Electronic Modeling of Dye-Sensitized Solar Cells for Steady-State Parameter Extraction , 2011 .

[8]  Yonggang Yao,et al.  Thermally Conductive Reduced Graphene Oxide Thin Films for Extreme Temperature Sensors , 2019, Advanced Functional Materials.

[9]  K. Jeppson,et al.  The effects of graphene-based films as heat spreaders for thermal management in electronic packaging , 2016, 2016 17th International Conference on Electronic Packaging Technology (ICEPT).

[10]  Xing’ao Li,et al.  Carbon materials for enhancing charge transport in the advancements of perovskite solar cells , 2017 .

[11]  Xiao-Jie Wu,et al.  Two-dimensional modeling of TiO2 nanowire based organic–inorganic hybrid perovskite solar cells , 2016 .

[12]  Farshad Yaghouti Niyat,et al.  COMSOL-Based Modeling and Simulation of SnO2/rGO Gas Sensor for Detection of NO2 , 2018, Scientific reports.

[13]  B. M. Soucase,et al.  Numerical Simulations on Perovskite Photovoltaic Devices , 2016 .

[14]  L. Cinà,et al.  Reduced graphene oxide as efficient and stable hole transporting material in mesoscopic perovskite solar cells , 2016 .

[15]  Harry A Atwater,et al.  Design of nanostructured solar cells using coupled optical and electrical modeling. , 2012, Nano letters.

[16]  N. Gorji,et al.  Modeling of temperature profile, thermal runaway and hot spot in thin film solar cells , 2016 .

[17]  Omar A. M. Abdelraouf,et al.  Towards nanostructured perovskite solar cells with enhanced efficiency: Coupled optical and electrical modeling , 2016 .

[18]  N. Herlin‐Boime,et al.  The benefits of graphene for hybrid perovskite solar cells , 2016 .

[19]  P. Chu,et al.  Strain effect on lattice vibration, heat capacity, and thermal conductivity of graphene , 2012 .

[20]  Wei Zhang,et al.  Optical properties and limiting photocurrent of thin-film perovskite solar cells , 2015 .

[21]  Sk. Masiul Islam,et al.  Photovoltaic solar cells based on graphene/gallium arsenide Schottky junction , 2019, Optik.

[22]  G. Fiori,et al.  Can graphene outperform indium tin oxide as transparent electrode in organic solar cells? , 2015 .

[23]  M. Razaghi,et al.  Finite element simulation of perovskite solar cell: A study on efficiency improvement based on structural and material modification , 2019, Solar Energy.

[24]  P. Saxena,et al.  COMSOL Simulation of Heat Distribution in Perovskite Solar Cells: Coupled Optical–Electrical–Thermal 3-D Analysis , 2019, IEEE Journal of Photovoltaics.

[25]  Feng Yan,et al.  Efficient Semitransparent Perovskite Solar Cells with Graphene Electrodes , 2015, Advanced materials.

[26]  P. Maddalena,et al.  Optical properties of graphene oxide and reduced graphene oxide determined by spectroscopic ellipsometry , 2017 .

[28]  T. Noda,et al.  Low temperature processed inverted planar perovskite solar cells by r-GO/CuSCN hole-transport bilayer with improved stability , 2018, Solar Energy.

[29]  J. Spurgeon,et al.  Intense Pulsed Light Sintering of CH3NH3PbI3 Solar Cells. , 2016, ACS applied materials & interfaces.

[30]  S. M. Abdullah,et al.  UV- ozone treated graphene oxide/ PEDOT:PSS bilayer as a novel hole transport layer in highly efficient and stable organic solar cells , 2019, Organic Electronics.

[31]  N. Gorji,et al.  Simulation analysis of graphene contacted perovskite solar cells using SCAPS-1D , 2019, Optical and Quantum Electronics.

[32]  Mingkui Wang,et al.  Graphene oxide modified hole transport layer for CH3NH3PbI3 planar heterojunction solar cells , 2016 .