A new efficient mixed formulation for thin shell finite element models

Abstract : A nine node shell element is developed by a new and more efficient mixed formulation. The new shell element formulation is based on the Hellinger-Reissner principle with independent strain and the concept of degenerate solid shell. The new formulation is made more efficient in terms of computing time than the conventional mixed formulation by dividing the assumed strain fields into a lower part and a higher order part. Numerical results demonstrate that the present nine node element is free of locking even for very thin plates and shells and is also kinematically stable. In fact the stiffness matrix associated with the higher order assumed strain plays the role of a stabilization matrix.

[1]  Ray W. Clough,et al.  Improved numerical integration of thick shell finite elements , 1971 .

[2]  Thomas J. R. Hughes,et al.  A simple and efficient finite element for plate bending , 1977 .

[3]  S. W. Lee,et al.  Study of a nine-node mixed formulation finite element for thin plates and shells , 1985 .

[4]  C. C. Dai,et al.  A triangular finite element for thin plates and shells , 1985 .

[5]  H. Parisch,et al.  A critical survey of the 9-node degenerated shell element with special emphasis on thin shell application and reduced integration , 1979 .

[6]  Theodore H. H. Pian,et al.  Improvement of Plate and Shell Finite Elements by Mixed Formulations , 1977 .

[7]  E. Hinton,et al.  Spurious modes in two‐dimensional isoparametric elements , 1979 .

[8]  S. W. Lee,et al.  A new efficient approach to the formulation of mixed finite element models for structural analysis , 1986 .

[9]  O. C. Zienkiewicz,et al.  Analysis of thick and thin shell structures by curved finite elements , 1970 .

[10]  Medhat A. Haroun,et al.  Reduced and selective integration techniques in the finite element analysis of plates , 1978 .

[11]  T. Belytschko,et al.  Membrane Locking and Reduced Integration for Curved Elements , 1982 .

[12]  E. Hinton,et al.  A study of quadrilateral plate bending elements with ‘reduced’ integration , 1978 .

[13]  Ted Belytschko,et al.  Implementation and application of a 9-node Lagrange shell element with spurious mode control , 1985 .

[14]  O. C. Zienkiewicz,et al.  Reduced integration technique in general analysis of plates and shells , 1971 .

[15]  Ted Belytschko,et al.  A consistent control of spurious singular modes in the 9-node Lagrange element for the laplace and mindlin plate equations , 1984 .