Mechanism of gross melt fracture elimination in the extrusion of polyethylenes in the presence of boron nitride

[1]  M. Denn,et al.  Planar contraction flow with a slip boundary condition , 2003 .

[2]  J. Guillet,et al.  Molecular structure and gross melt fracture triggering , 2003 .

[3]  M. Denn,et al.  Rupture of entangled polymeric liquids in elongational flow , 2003 .

[4]  J. Mewis,et al.  Suspensions of monodisperse spheres in polymer melts: particle size effects in extensional flow , 2003 .

[5]  J. Dealy,et al.  Gross melt fracture of polyethylene. II: Effects of molecular structure , 2002 .

[6]  J. Dealy,et al.  Gross melt fracture of polyethylene. I: A criterion based on tensile stress , 2002 .

[7]  S. Hatzikiriakos,et al.  Role of processing aids in the extrusion of molten polymers , 2002 .

[8]  K. Migler,et al.  Extensional deformation, cohesive failure, and boundary conditions during sharkskin melt fracture , 2002 .

[9]  J. Guillet,et al.  Influence of filters in the die entrance region on gross melt fracture: extrudate and flow visualization , 2002 .

[10]  K. Migler,et al.  Visualizing the elimination of sharkskin through fluoropolymer additives: Coating and polymer–polymer slippage , 2001 .

[11]  I. B. Kazatchkov,et al.  The effect of boron nitride on the rheology and processing of polyolefins , 2000 .

[12]  J. Piau,et al.  Effect of die entrance filtering on mitigation of upstream instability during extrusion of polymer melts , 2000 .

[13]  E. E. Rosenbaum,et al.  Boron Nitride Powders: New Processing AIDS for Molten Polymers , 2000 .

[14]  S. Hatzikiriakos,et al.  Boron nitride as a processing aid for the extrusion of polyolefins and fluoropolymers , 2000 .

[15]  Franky Yip.  The effect of boron nitride on the rheology and processability of molten polymers , 2000 .

[16]  J. Dealy,et al.  Effects of Molecular Structure , 1999 .

[17]  K. Koyama,et al.  Flow-induced whisker orientation and viscosity for molten composite systems in a uniaxial elongational flow field , 1995 .

[18]  A. Leonov.  Nonlinear Phenomena in Flows of Viscoelastic Polymer Fluids , 1994 .

[19]  A. I. Leonov,et al.  Melt Flow Instabilities , 1994 .

[20]  R. Larson.  Instabilities in viscoelastic flows , 1992 .

[21]  S. J. Kurtz.  THE DYNAMICS OF SHARKSKIN MELT FRACTURE: EFFECT OF DIE GEOMETRY , 1992 .

[22]  A. V. Ramamurthy.  Wall Slip in Viscous Fluids and Influence of Materials of Construction , 1986 .

[23]  J. Pearson,et al.  Mechanics of polymer processing , 1985 .

[24]  D. Baird,et al.  THE INFLUENCE OF POROUS MEDIA ON THE FLOW OF POLYMER MELTS IN CAPILLARIES , 1983 .

[25]  F. Cogswell.  Converging flow and stretching flow: A compilation , 1978 .

[26]  R. Bird.  Dynamics of Polymeric Liquids , 1977 .

[27]  M. Shaw.  Flow of polymer melts through a well‐lubricated, conical die , 1975 .

[28]  H. Hürlimann,et al.  Der Zusammenhang zwischen der Dehnspannung von Kunststoffschmelzen im Düseneinlauf und im Schmelzbruch , 1972 .

[29]  F. N. Cogswell,et al.  Converging flow of polymer melts in extrusion dies , 1972 .

[30]  James L White,et al.  Polymer Melt Flow Instabilities in Extrusion: Investigation of the Mechanism and Material and Geometric Variables , 1971 .

[31]  J. Tordella.  UNSTABLE FLOW OF MOLTEN POLYMERS , 1969 .

[32]  R. Race.  MEMOIR. Ronald Aylmer Fisher 1890–1962 , 1963 .

[33]  J. Benbow,et al.  New aspects of melt fracture , 1963 .

[34]  E. B. Bagley,et al.  Effect of Die Entry Geometry on Polymer Melt Fracture and Extrudate Distortion , 1961 .

[35]  J. Tordella.  Fracture in the Extrusion of Amorphous Polymers through Capillaries , 1956 .