Machining deformation prediction for frame components considering multifactor coupling effects

The machining deformation prediction model was developed considering multifactor coupling effects including original residual stresses, clamping loads, milling mechanical loads, milling thermal loads, and machining-induced residual stresses. The machining deformation of a true frame monolithic component was predicted by this model. To validate the accuracy of prediction model, deformations also were measured on a coordinate measuring machine. The deformations predicted by the model show a good agreement with the experiment’s results. The deformation prediction model can provide an effective way to study further control strategies of machining deformations for monolithic component.

[1]  Shreyes N. Melkote,et al.  Optimal Fixture Design Accounting for the Effect of Workpiece Dynamics , 2001 .

[2]  Edward C. De Meter,et al.  Fast support layout optimization , 1998 .

[3]  Jianbin Xue,et al.  Deformation prediction and error compensation in multilayer milling processes for thin-walled parts , 2009 .

[4]  Shreyes N. Melkote,et al.  Fixture Clamping Force Optimisation and its Impact on Workpiece Location Accuracy , 2001 .

[5]  Farid Najafi,et al.  Deformation analysis of large aerospace components during assembly , 2009 .

[6]  Wan Yi,et al.  Measuring residual stresses depth profile in pre-stretched aluminum alloy plate using crack compliance method , 2007 .

[7]  Yong Yang,et al.  Study on Machining Distortion of Titanium Alloy Aircraft Monolithic Component by Finite Element Method and Experiment , 2011 .

[8]  Y. Ke,et al.  Study on Machining Deformation of Aircraft Monolithic Component by FEM and Experiment , 2006 .

[9]  Dong Hui,et al.  Finite Element Model for Optimal Clamping Scheme of Frame Shape Workpiece Based on Residual Stress Distribution , 2003 .

[10]  Paul Xirouchakis,et al.  FEM-based prediction of workpiece transient temperature distribution and deformations during milling , 2009 .

[11]  Shreyes N. Melkote,et al.  Improved workpiece location accuracy through fixture layout optimization , 1999 .

[12]  Harry H. Cheng,et al.  Integrated machining error compensation method using OMM data and modified PNN algorithm , 2006 .

[13]  Michael R. Hill,et al.  Residual stress, stress relief, and inhomogeneity in aluminum plate , 2002 .

[14]  Hun Guo,et al.  Effect of Tool-Path on Milling Accuracy under Clamping , 2005 .

[15]  B. Szabó,et al.  Machining-Induced Residual Stress and Distortion , 2005 .

[16]  Svetan Ratchev,et al.  Milling error prediction and compensation in machining of low-rigidity parts , 2004 .

[17]  T. D. Marusich,et al.  Finite Element Modeling of Part Distortion , 2008, ICIRA.

[18]  Mei Zhong-yi,et al.  Researching and Simulating Deformation of Aerocraft Structure Part in NC Machining , 2005 .

[19]  Feng Ruan,et al.  Finite element analysis and experimental investigation on deformation mechanism of non-axisymmetric tube spinning , 2011, The International Journal of Advanced Manufacturing Technology.

[20]  Iain Finnie,et al.  A Method for Measurement of Axisymmetric Axial Residual Stresses in Circumferentially Welded Thin-Walled Cylinders , 1985 .

[21]  Jianbin Xue,et al.  Deformation control through fixture layout design and clamping force optimization , 2008 .

[22]  I. Finnie,et al.  Determination of Residual Stresses From Stress Intensity Factor Measurements , 1971 .

[23]  Yinglin Ke,et al.  Machining distortion prediction of aerospace monolithic components , 2009 .