Cryogenic testing of a unimorph-type deformable mirror and theoretical material optimization

Abstract. The testing of a lightweight unimorph-type deformable mirror (DM) for wavefront correction in cryogenic instruments is reported. The presented mirror manufactured from the titanium alloy TiAl6V4 with a piezoelectric disk actuator was cooled to 86 K and characterized for thermally induced deformation and the achievable piezoelectric stroke between room temperature and 86 K. Through a finite element analysis, we obtained a first approximation in determining the exact temperature-dependent coefficient of thermal expansion (CTE) of the piezo material PIC151. Simulations were based on dilatometer measurements of the CTE of the TiAl6V4 mirror base between room temperature and 86 K. These investigations will enable the improvement of the athermal design of a unimorph-type DM.

[1]  Konstantinos Vogiatzis,et al.  Thermal performance prediction of the TMT telescope structure , 2009, Optical Engineering + Applications.

[2]  Mark A. Ealey,et al.  Cryogenic deformable mirror technology development , 2003, SPIE Optics + Photonics.

[3]  Gregory Nellis,et al.  Measurements of the Material Properties of a Laminated Piezoelectric Stack at Cryogenic Temperatures , 2006 .

[4]  H. Ledbetter,et al.  Elastic properties of two titanium alloys at low temperatures , 1974 .

[5]  Erez N. Ribak,et al.  Bimorph adaptive mirrors and curvature sensing. , 1994 .

[6]  Andreas Tünnermann,et al.  Thermomechanical design, hybrid fabrication, and testing of a MOEMS deformable mirror , 2013 .

[7]  R. Sharples,et al.  Cryogenic wavefront correction using membrane deformable mirrors. , 2001, Optics express.

[8]  S. Jang,et al.  Composition and temperature dependence of the dielectric, piezoelectric and elastic properties of pure PZT ceramics , 1989, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[9]  T Hashimoto,et al.  Mechanical properties of Stycast-1266 at low temperatures. , 1980, The Review of scientific instruments.

[10]  Ralf-Rainer Rohloff,et al.  A novel athermal approach for high-performance cryogenic metal optics , 2010, Astronomical Telescopes + Instrumentation.

[11]  Douglas R. McCarter,et al.  Development of a cryogenic all-silicon telescope (CAIT) , 2012, Other Conferences.

[12]  M. Rohde,et al.  Metal mirrors with excellent figure and roughness , 2008, Optical Systems Design.

[13]  Robert K. Tyson.  Principles of Adaptive Optics , 1991 .

[14]  G. W. Swift,et al.  Thermal contraction of Vespel SP-22 and Stycast 1266 from 300K to 4K , 1979 .