Exo-Glove: A Wearable Robot for the Hand with a Soft Tendon Routing System

Soft wearable robots are good alternatives to rigid-frame exoskeletons because they are compact and lightweight. This article describes a soft wearable hand robot called the Exo-Glove that uses a soft tendon routing system and an underactuation adaptive mechanism. The proposed system can be used to develop other types of soft wearable robots. The glove part of the system is compact and weighs 194 g. The results conducted using a healthy subject showed sufficient performance for the execution of daily life activities, namely a pinch force of 20 N, a wrap grasp force of 40 N, and a maximum grasped object size of 76 mm. The use of an underactuation mechanism enabled the grasping of objects of various shapes without active control. A subject suffering from paralysis of the hands due to a spinal cord injury was able to use the glove to grasp objects of various shapes.

[1]  T. Twitchell.  The restoration of motor function following hemiplegia in man. , 1951, Brain : a journal of neurology.

[2]  E. Dill,et al.  An Introduction to the Mechanics of Solids , 1972 .

[3]  K. An,et al.  Functional anatomy of the human digital flexor pulley system. , 1989, The Journal of hand surgery.

[4]  T. Noritsugu,et al.  Wearable power assist device for hand grasping using pneumatic artificial rubber muscle , 2004, RO-MAN 2004. 13th IEEE International Workshop on Robot and Human Interactive Communication (IEEE Catalog No.04TH8759).

[5]  Niels Smaby,et al.  Identification of key pinch forces required to complete functional tasks. , 2004, Journal of rehabilitation research and development.

[6]  Maarten J. IJzerman,et al.  Survey of the needs of patients with spinal cord injury: impact and priority for improvement in hand function in tetraplegics , 2004, Spinal Cord.

[7]  Andreas Wege,et al.  Development and control of a hand exoskeleton for rehabilitation of hand injuries , 2005, 2005 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[8]  M. Ferrarin,et al.  Experimental protocol for the kinematic analysis of the hand: definition and repeatability. , 2006, Gait & posture.

[9]  J. Iqbal,et al.  Cerebral Palsy: An overview , 2006 .

[10]  Derek G. Kamper,et al.  An Actuated Finger Exoskeleton for Hand Rehabilitation Following Stroke , 2007 .

[11]  Yasuhisa Hasegawa,et al.  Wearable handling support system for paralyzed patient , 2008, 2008 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[12]  Massimo Bergamasco,et al.  Mechanical design of a novel Hand Exoskeleton for accurate force displaying , 2009, 2009 IEEE International Conference on Robotics and Automation.

[13]  HyunKi In,et al.  Investigation of friction characteristics of a tendon driven wearable robotic hand , 2010, ICCAS 2010.

[14]  Kyu-Jin Cho,et al.  Jointless structure and under-actuation mechanism for compact hand exoskeleton , 2011, 2011 IEEE International Conference on Rehabilitation Robotics.

[15]  Francesco Giovacchini,et al.  Mechatronic Design and Characterization of the Index Finger Module of a Hand Exoskeleton for Post-Stroke Rehabilitation , 2012, IEEE/ASME Transactions on Mechatronics.

[16]  Kyu-Jin Cho,et al.  Capstan brake: Passive brake for tendon-driven mechanism , 2012, 2012 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[17]  Kyu-Jin Cho,et al.  Design of a passive brake mechanism for tendon driven devices , 2012 .

[18]  Conor J. Walsh,et al.  Biologically-inspired soft exosuit , 2013, 2013 IEEE 13th International Conference on Rehabilitation Robotics (ICORR).

[19]  Hyung‐Soon Park,et al.  Development of a Biomimetic Hand Exotendon Device (BiomHED) for Restoration of Functional Hand Movement Post-Stroke , 2014, IEEE Transactions on Neural Systems and Rehabilitation Engineering.