Effect of interface layer on the performance of high power diode laser arrays

Packaging is an important part of high power diode laser (HPLD) development and has become one of the key factors affecting the performance of high power diode lasers. In the package structure of HPLD, the interface layer of die bonding has significant effects on the thermal behavior of high power diode laser packages and most degradations and failures in high power diode laser packages are directly related to the interface layer. In this work, the effects of interface layer on the performance of high power diode laser array were studied numerically by modeling and experimentally. Firstly, numerical simulations using finite element method (FEM) were conducted to analyze the effects of voids in the interface layer on the temperature rise in active region of diode laser array. The correlation between junction temperature rise and voids was analyzed. According to the numerical simulation results, it was found that the local temperature rise of active region originated from the voids in the solder layer will lead to wavelength shift of some emitters. Secondly, the effects of solder interface layer on the spectrum properties of high power diode laser array were studied. It showed that the spectrum shape of diode laser array appeared “right shoulder” or “multi-peaks”, which were related to the voids in the solder interface layer. Finally, “void-free” techniques were developed to minimize the voids in the solder interface layer and achieve high power diode lasers with better optical-electrical performances.

[1]  Stefan Weiss,et al.  DPSSL and FL pumps based on 980-nm telecom pump laser technology: changing the industry , 2004, SPIE LASE.

[2]  Rajaram Bhat,et al.  A study on the reliability of indium solder die bonding of high power semiconductor lasers , 2006 .

[3]  Brian O. Faircloth,et al.  High-brightness high-power fiber coupled diode laser system for material processing and laser pumping , 2003, SPIE LASE.

[4]  Chung-En Zah,et al.  Thermal management strategies for high power semiconductor pump lasers , 2006, The Ninth Intersociety Conference on Thermal and Thermomechanical Phenomena In Electronic Systems (IEEE Cat. No.04CH37543).

[5]  Hui Liu,et al.  Packaging of High Power Semiconductor Lasers , 2014 .

[6]  Chung-En Zah,et al.  A metallization scheme for junction-down bonding of high-power semiconductor lasers , 2006, IEEE Transactions on Advanced Packaging.

[7]  V.X. Liu,et al.  Technology trend and challenges in high power semiconductor laser packaging , 2007, 2009 59th Electronic Components and Technology Conference.

[8]  Wang Jingwei,et al.  Thermal Reaction of High Power Semiconductor Laser with Voids in Solder Layer , 2011 .

[9]  Jao-Hwa Kuang,et al.  The influence of thermal aging on joint strength and fracture surface of Pb/Sn and Au/Sn solders in laser diode packages , 2002 .

[10]  William D. Brown,et al.  Investigation of reliability issues in high power laser diode bar packages , 2003, Microelectron. Reliab..

[11]  Xingsheng Liu,et al.  Study of the mechanisms of spectral broadening in high power semiconductor laser arrays , 2008, 2008 58th Electronic Components and Technology Conference.