Modeling and mitigation on conducted emission for switch mode power supply

The switch mode power supply (SMPS) have been widely used in the electrical and electronics systems for AC-DC and DC-DC power conversion, which can generate a lot of electromagnetic interference (EMI), especially conducted emission (CE) from 9kHz to 30MHz. The traditional CE models and mechanisms have been present for three line systems, including live, neutral and ground lines, while a novel CE models and mechanisms have been proposed in the paper for two line SMPS. Moreover, two methods have been designed to reduce the CE of SMPS, such as the capacitor shunt between the source and drain electrodes of MOSFET and the capacitors matrix. The experiment results show that the CE of the power concentrator can be suppressed well and pass EN 55022 class B, thus realize the proposed approaches good validation.

[1]  Kye Yak See.  Network for conducted EMI diagnosis , 1999 .

[2]  F. C. Lee,et al.  Separation of the common-mode- and differential-mode-conducted EMI noise , 1996 .

[3]  Jian Sun,et al.  Conducted Common-Mode EMI Reduction by Impedance Balancing , 2012, IEEE Transactions on Power Electronics.

[4]  D. Pommerenke,et al.  DC-DC Buck Converter EMI Reduction Using PCB Layout Modification , 2011, IEEE Transactions on Electromagnetic Compatibility.

[5]  Henry Ott,et al.  Electromagnetic Compatibility Engineering , 2009 .

[6]  Frede Blaabjerg,et al.  A Modified LLCL Filter With the Reduced Conducted EMI Noise , 2013, IEEE Transactions on Power Electronics.

[7]  Ciro Attaianese,et al.  EMC of power converters: the self-compatibility approach , 2007 .

[8]  Haixiao Weng,et al.  Approximation of Worst Case Crosstalk at High Frequencies , 2011, IEEE Transactions on Electromagnetic Compatibility.

[9]  Yang,et al.  Investigation and Reduction on Conducted Electromagnetic Interference Noise Mechanism for Complex Power Electronics Systems , 2012 .

[10]  Y.-H. Chang.  Complex programmable logic device-based closed-loop implementation of switched-capacitor step-down DC-DC converter for multiple output choices , 2007 .

[11]  Amit Patra,et al.  Impact of a Frequency Modulated Pulsewidth Modulation (PWM) Switching Converter on the Input Power System Quality , 2010, IEEE Transactions on Power Electronics.

[12]  Rakesh Malik,et al.  Selection and placement of decoupling capacitors in high speed systems , 2013, IEEE Electromagnetic Compatibility Magazine.

[13]  H. Ott.  Electromagnetic Compatibility Engineering: Ott/Electromagnetic Compatibility , 2009 .