Methodology of Low Inductance Busbar Design for Three-Level Converters

[1]  Dushan Boroyevich,et al.  Busbar design for SiC-based H-bridge PEBB using 1.7 kV, 400 a SiC MOSFETs operating at 100 kHz , 2016, 2016 IEEE Energy Conversion Congress and Exposition (ECCE).

[2]  F. Luo,et al.  A three-level, T-type, power electronics building block using Si-SiC hybrid switch for high-speed drives , 2018, 2018 IEEE Applied Power Electronics Conference and Exposition (APEC).

[3]  Juha Pyrhonen,et al.  Stray inductance estimation with detailed model of the IGBT module , 2013, 2013 15th European Conference on Power Electronics and Applications (EPE).

[4]  Zhengming Zhao,et al.  Laminated busbar design and stray parameter analysis of three-level converter based on HVIGBT series connection , 2015, 2015 IEEE Applied Power Electronics Conference and Exposition (APEC).

[5]  L. Tolbert,et al.  Temperature-Dependent Short-Circuit Capability of Silicon Carbide Power MOSFETs , 2016, IEEE Transactions on Power Electronics.

[6]  Ali Emadi,et al.  Bus Bar Design for High-Power Inverters , 2018, IEEE Transactions on Power Electronics.

[7]  Zheng Zheng,et al.  The Impact of Layer Number on Stray Inductance of DC-link Busbar in Power Converters , 2013 .

[8]  Jianjing Wang,et al.  An Investigation Into the Effects of the Gate Drive Resistance on the Losses of the MOSFET–Snubber–Diode Configuration , 2012, IEEE Transactions on Power Electronics.

[9]  Yue Zhao,et al.  Busbar Design for Distributed DC-Link Capacitor Banks for Traction Applications , 2018, 2018 IEEE Energy Conversion Congress and Exposition (ECCE).

[10]  Yong Kang,et al.  Investigation, Evaluation, and Optimization of Stray Inductance in Laminated Busbar , 2014, IEEE Transactions on Power Electronics.

[11]  P. Silventoinen,et al.  Modelling of low inductive busbars for medium voltage three-level NPC inverter , 2012, 2012 IEEE Power Electronics and Machines in Wind Applications.

[12]  Ali Emadi,et al.  Automotive Traction Inverters: Current Status and Future Trends , 2019, IEEE Transactions on Vehicular Technology.

[14]  Fan Zhang,et al.  Voltage Suppression in Wire-Bond-Based Multichip Phase-Leg SiC MOSFET Module Using Adjacent Decoupling Concept , 2017, IEEE Transactions on Industrial Electronics.

[15]  Bin Wu,et al.  Recent Advances and Industrial Applications of Multilevel Converters , 2010, IEEE Transactions on Industrial Electronics.

[16]  Lei Zhang,et al.  Switching Transient Analysis and Design of a Low Inductive Laminated Bus Bar for a T-type Converter , 2016 .

[17]  Amol Deshpande,et al.  Design and Evaluation of Laminated Busbar for Three-Level T-Type NPC Power Electronics Building Block With Enhanced Dynamic Current Sharing , 2020, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[18]  Fang Luo,et al.  Multilayer busbar design for a Si IGBT and SiC MOSFET hybrid switch based 100 kW three-level T-type PEBB , 2017, 2017 IEEE 5th Workshop on Wide Bandgap Power Devices and Applications (WiPDA).

[19]  Xing Zhang,et al.  Effect of key physical structures on the laminated bus bar inductance , 2016, 2016 IEEE 8th International Power Electronics and Motion Control Conference (IPEMC-ECCE Asia).

[20]  Huan Zhang,et al.  Common-Mode EMI Noise Modeling and Reduction With Balance Technique for Three-Level Neutral Point Clamped Topology , 2017, IEEE Transactions on Industrial Electronics.

[21]  Katsuya Nomura,et al.  Analytical Technique for Designing an RC Snubber Circuit for Ringing Suppression in a Phase-Leg Configuration , 2018, IEEE Transactions on Power Electronics.

[22]  Li Yang,et al.  Estimation and minimization of power loop inductance in 135 kW SiC traction inverter , 2018, 2018 IEEE Applied Power Electronics Conference and Exposition (APEC).

[23]  Xiangning He,et al.  Development of a compact 750KVA three-phase NPC three-level universal inverter module with specifically designed busbar , 2010, 2010 Twenty-Fifth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[26]  Di Zhang,et al.  Three-level two-stage decoupled active NPC converter with Si IGBT and SiC MOSFET , 2017, 2017 IEEE Energy Conversion Congress and Exposition (ECCE).

[27]  Martin H. Graham,et al.  Book Review: High-Speed Digital Design: A Handbook of Black Magic by Howard W. Johnson and Martin Graham: (Prentice-Hall, 1993) , 1993, CARN.

[28]  Bo Liu,et al.  A Simple Control to Reduce Device Over-Voltage Caused by Non-Active Switch Loop in Three-Level ANPC Converters , 2019, 2019 IEEE Applied Power Electronics Conference and Exposition (APEC).

[29]  Design Considerations for Designing with Cree SiC Modules Part 2 . Techniques for Minimizing Parasitic Inductance , 2013 .

[30]  F. Blaabjerg,et al.  Switching Characterization of SiC MOSFETs in Three-Level Active Neutral-Point-Clamped Inverter Application , 2019, 2019 10th International Conference on Power Electronics and ECCE Asia (ICPE 2019 - ECCE Asia).

[31]  Fred C. Lee,et al.  Switching Performance Optimization of a High Power High Frequency Three-Level Active Neutral Point Clamped Phase Leg , 2014, IEEE Transactions on Power Electronics.

[32]  F. Wang,et al.  Effects of Junction Capacitances and Commutation Loops Associated With Line-Frequency Devices in Three-Level AC/DC Converters , 2019, IEEE Transactions on Power Electronics.

[33]  Nan Chen,et al.  Current sharing design assessment of DC link capacitor module , 2014, 2014 16th European Conference on Power Electronics and Applications.