Supplier Selection by Fuzzy Assessment and Testing for Process Quality under Consideration with Data Imprecision

Supply chain management models integrate upstream and downstream organizations to enable rapid response to consumer needs. For the manufacturing industry, the process quality of suppliers is thus the foundation of sustainable growth for firms and an important indicator of whether a firm can effectively reduce waste and protect the environment. To this end, this paper proposes a model of supplier selection for manufacturers based on process quality assessment. First of all, Six Sigma quality index Qpk is adopted as the assessment tool to conveniently measure the quality level of process. Practical applications require estimates of Qpk from the data collected to analyze the process quality of each supplier. The fact that uncertainty is unavoidable in the collected data means that using the crisp estimate of Qpk can lead to misjudgment of the process quality. To enhance the reliability of evaluation and reduce the risk of misjudgment, the fuzzy number Q^˜pk is proposed to perform the fuzzy testing of two indices Qpk provided by suppliers with the intent of making reliable decisions on supplier selection.

[1]  Barbaros Yet,et al.  Building Bayesian networks based on DEMATEL for multiple criteria decision problems: A supplier selection case study , 2019, Expert Syst. Appl..

[2]  Kuen-Suan Chen,et al.  Fuzzy testing model for the lifetime performance of products under consideration with exponential distribution , 2020, Annals of Operations Research.

[3]  Roger G. Schroeder,et al.  Six sigma: A goal-theoretic perspective , 2003 .

[4]  Kuen-Suan Chen,et al.  Developing a quality-based supplier selection model from the buying company perspective , 2020 .

[5]  Kuen-Suan Chen,et al.  The construction and application of Six Sigma quality indices , 2017, Int. J. Prod. Res..

[6]  Y. C. Chang,et al.  Interval estimation of capability index Cpmk for manufacturing processes with asymmetric tolerances , 2009, Comput. Ind. Eng..

[7]  José Alberto Vargas,et al.  Evaluation of process capability in multivariate nonlinear profiles , 2016 .

[8]  Kuen-Suan Chen,et al.  Using a QCAC–Entropy–TOPSIS approach to measure quality characteristics and rank improvement priorities for all substandard quality characteristics , 2014 .

[9]  K.-T. Yu,et al.  Combining tolerance design and monitoring process capability in a design-manufacturing integration procedure , 2009 .

[10]  James J. Buckley,et al.  Fuzzy statistics: hypothesis testing , 2005, Soft Comput..

[11]  Kuen-Suan Chen,et al.  Multi-process capability plot and fuzzy inference evaluation , 2008 .

[12]  Abbas Parchami,et al.  Confidence interval of generalized Taguchi index , 2013, J. Intell. Fuzzy Syst..

[13]  Kerstin Vännman,et al.  Elliptical safety region plots for C pk , 2011 .

[14]  Victor E. Kane,et al.  Process Capability Indices , 1986 .

[15]  Jane A. Luke,et al.  Comparison between two process capability indices using generalized confidence intervals , 2013 .

[16]  Kuen-Suan Chen,et al.  Supplier selection by testing the process incapability index , 2006 .

[17]  Víctor Hugo Flores-Ochoa,et al.  Capability indices for circular tolerance regions based on a Gaussian copula , 2019, The International Journal of Advanced Manufacturing Technology.

[18]  A. Golmohammadi,et al.  A practical framework for supplier selection decisions with an application to the automotive sector , 2020, Int. J. Prod. Res..

[19]  Eric Cornuel,et al.  Challenges facing business schools in the future , 2007 .

[20]  Kuen-Suan Chen,et al.  Two-tailed Buckley fuzzy testing for operating performance index , 2019, J. Comput. Appl. Math..

[21]  Judy A. Siguaw,et al.  Measuring the Performance of Suppliers: An Analysis of Evaluation Processes , 2002 .

[22]  Kerstin Vännman,et al.  Process capability plots—a quality improvement tool , 1999 .

[23]  Samuel Kotz,et al.  An overview of theory and practice on process capability indices for quality assurance , 2009 .

[24]  Sebastian Utz,et al.  An a posteriori decision support methodology for solving the multi-criteria supplier selection problem , 2019, Eur. J. Oper. Res..

[25]  Hengameh Hadian,et al.  Multivariate statistical control chart and process capability indices for simultaneous monitoring of project duration and cost , 2019, Comput. Ind. Eng..

[26]  Kuen-Suan Chen,et al.  Testing and analysing capability performance for products with multiple characteristics , 2016 .

[27]  N. K. Singh,et al.  Process capability index for bivariate exponentially distributed quality characteristics and its sampling properties , 2016 .

[28]  Inderpreet Singh Ahuja,et al.  Strategies and success factors for overcoming challenges in TPM implementation in Indian manufacturing industry , 2008 .

[29]  Kerstin Vännman.  The Circular Safety Region: a Useful Graphical Tool in Capability Analysis , 2005 .

[30]  Gary W. Dickson,et al.  AN ANALYSIS OF VENDOR SELECTION SYSTEMS AND DECISIONS , 1966 .

[31]  Anshu Gupta,et al.  Productivity Improvement in the Chassis Preparation Stage of the Amplifier Production Process: A DMAIC Six Sigma Methodology , 2016 .

[32]  Kuen-Suan Chen,et al.  Testing process quality of wire bonding with multiple gold wires from viewpoint of producers , 2018, Int. J. Prod. Res..

[33]  Kuen-Suan Chen,et al.  A mathematical programming model for constructing the confidence interval of process capability index Cpm in evaluating process performance: an example of five-way pipe , 2017 .

[34]  James T. Lin,et al.  3PL selection criteria in integrated circuit manufacturing industry in Taiwan , 2016 .

[35]  Kuen-Suan Chen,et al.  Capability performance analysis for processes with multiple characteristics using accuracy and precision , 2014 .

[36]  N. Fredj,et al.  Assessing process capability index using sampling plan in the presence of measurement system errors , 2019, The International Journal of Advanced Manufacturing Technology.

[37]  Kuen-Suan Chen,et al.  Sputtering Process Assessment of ITO Film for Multiple Quality Characteristics With One-Sided and Two-Sided Specifications , 2014 .

[38]  Kuen-Suan Chen,et al.  A novel approach to deriving the lower confidence limit of indices Cpu, Cpl, and Cpk in assessing process capability , 2017, Int. J. Prod. Res..

[39]  Norma Faris Hubele,et al.  Confidence intervals and sample size determination for Cpm , 2001 .

[40]  Kuan Yew Wong,et al.  A Predictive Integrated Genetic-Based Model for Supplier Evaluation and Selection , 2017, Int. J. Fuzzy Syst..

[41]  Richard K. Burdick,et al.  Using Confidence Intervals to Compare Process Capability Indices , 2004 .

[42]  Kuen-Suan Chen,et al.  An application of DMADV methodology for increasing the yield rate of surveillance cameras , 2010, Microelectron. Reliab..

[43]  Kuen-Suan Chen,et al.  The communion bridge to Six Sigma and process capability indices , 2009 .

[44]  Muhammad Saad Memon,et al.  Interactive Fuzzy Multi Criteria Decision Making Approach for Supplier Selection and Order Allocation in a Resilient Supply Chain , 2019, Mathematics.

[45]  Russell A. Boyles,et al.  The Taguchi capability index , 1991 .

[47]  Kuen-Suan Chen,et al.  Analyzing processing quality of machine tools via processed product: Example of ball valve processing machine , 2020 .