Multivariable analysis of spectral measurements for the characterization of semiconductor processes

3

[1]  Edwin T. Carlen,et al.  AutomaticGenerationof Thin Film ProcessFlows – Part I : BasicAlgorithms , 1999 .

[2]  Duane S. Boning,et al.  SPATIAL VARIATION IN SEMICONDUCTOR PROCESSES: MODELING FOR CONTROL , 1998 .

[3]  David M. Haaland,et al.  Etch depth estimation of large-period silicon gratings with multivariate calibration of rigorously simulated diffraction profiles , 1994 .

[4]  Duane S. Boning,et al.  Run by run control of chemical-mechanical polishing , 1995, Seventeenth IEEE/CPMT International Electronics Manufacturing Technology Symposium. 'Manufacturing Technologies - Present and Future'.

[5]  Duane S. Boning,et al.  A study of within-wafer non-uniformity metrics , 1999, 1999 4th International Workshop on Statistical Metrology (Cat. No.99TH8391).

[6]  George W. Irwin,et al.  Neural networks for control and systems , 1992 .

[7]  Duane S. Boning,et al.  Endpoint prediction for polysilicon plasma etch via optical emission interferometry , 1997 .

[8]  F. W. Preston.  The Theory and Design of Plate Glass Polishing Machines , 1927 .

[9]  Gwilym M. Jenkins,et al.  Time series analysis, forecasting and control , 1971 .

[10]  Shin-Hwa Li,et al.  Chapter 9 Applications and CMP-Related Process Problems , 1999 .

[11]  Armann Ingolfsson,et al.  Run by run process control: combining SPC and feedback control , 1995 .

[12]  李幼升,et al.  Ph , 1989 .

[13]  I. Jolliffe.  Principal Component Analysis , 2002 .

[14]  Chris Watkins,et al.  Learning from delayed rewards , 1989 .

[15]  Aaron E. Gower,et al.  Integrated model-based run-to-run uniformity control for epitaxial silicon deposition , 2001 .

[16]  J. Holloway,et al.  In situ sensor of spatially resolved optical emission , 1996 .

[17]  Duane S. Boning,et al.  PLANARIZATION AND INTEGRATION OF SHALLOW TRENCH ISOLATION , 1998 .

[18]  Paul J. Werbos,et al.  Neural networks for control and system identification , 1989, Proceedings of the 28th IEEE Conference on Decision and Control,.

[19]  Bruce R. Kowalski,et al.  Multicomponent Determination of Chlorinated Hydrocarbons Using a Reaction-Based Chemical Sensor. 1. Multivariate Calibration of Fujiwara Reaction Products , 1994 .

[20]  Stella W. Pang,et al.  Minimized response time of optical emission and mass spectrometric signals for optimized endpoint detection , 1996 .

[21]  Gwilym M. Jenkins,et al.  Time series analysis, forecasting and control , 1972 .

[22]  Nannaji Saka,et al.  Mechanics, mechanisms, and modeling of the chemical mechanical polishing process , 2001 .

[23]  Ronald J. Gutmann,et al.  Chemical Mechanical Planarization of Microelectronic Materials , 1997 .

[24]  David A. White.  In-situ wafer uniformity estimation using principal component analysis and function approximation methods , 1995 .

[25]  Minh Sy Le.  Variation reduction in plasma etching via run-to-run process control and endpoint detection , 1997 .

[26]  H. R. Keller,et al.  Evolving factor analysis , 1991 .

[27]  J. Edward Jackson,et al.  A User's Guide to Principal Components. , 1991 .

[28]  Gary S. May,et al.  In-situ prediction of reactive ion etch endpoint using neural networks , 1995 .

[29]  Ka Shun Wong,et al.  Plasma etch endpoint via interferometric imaging , 1994, Proceedings of 1994 American Control Conference - ACC '94.

[30]  David J. Stein,et al.  Prediction of tungsten CMP pad life using blanket removal rate data and endpoint data obtained from process temperature and carrier motor current measurements , 1999, Other Conferences.

[31]  Duane S. Boning,et al.  Low open-area endpoint detection using a PCA-based T/sup 2/ statistic and Q statistic on optical emission spectroscopy measurements , 2000 .

[32]  S.J. Fang,et al.  Control of dielectric chemical mechanical polishing (CMP) using an interferometry based endpoint sensor , 1998, Proceedings of the IEEE 1998 International Interconnect Technology Conference (Cat. No.98EX102).

[33]  Dennis Okumu Ouma,et al.  Modeling of chemical mechanical polishing for dielectric planarization , 1998 .

[34]  B. Flinchbaugh,et al.  Monitoring and diagnosis of plasma etch processes , 1988 .

[35]  James P. Lauffer,et al.  Analysis of in-situ vibration monitoring for end-point detection of CMP planarization processes , 1999, Other Conferences.

[36]  S. Wold,et al.  Multi‐way principal components‐and PLS‐analysis , 1987 .

[37]  James Moyne,et al.  Compensating for CMP Pad Wear Using Run by Run Feedback Control , 1996 .

[38]  Dmitry V. Bakin,et al.  Application of backside fiber optic system for in-situ CMP endpoint detection on shallow-trench isolation wafers , 1998, Advanced Lithography.

[39]  M. H. Zaman,et al.  Automatic generation of thin film process flows. I. Basic algorithms , 1999 .

[40]  Amy Unruh,et al.  A methodology for the top-down synthesis of semiconductor process flows , 1995, Proceedings of International Symposium on Semiconductor Manufacturing.

[41]  J. Gregus,et al.  Scaling of Si and GaAs trench etch rates with aspect ratio, feature width, and substrate temperature , 1995 .

[42]  Duane S. Boning,et al.  An in-situ sensor for reduced consumable usage through control of CMP , 1998 .

[43]  T. Vincent,et al.  Radial optical emission profiles of radio frequency glow discharges , 1993 .

[44]  A.A. Penzias,et al.  The Next Fifty Years: Some Likely Impacts Of Solid-state Technology , 1997, Proceedings of the IEEE.

[45]  J.T.-C. Lee,et al.  Plasma etching of submicron devices: in situ monitoring and control by multi-wavelength ellipsometry , 1998 .

[46]  Edmund R. Malinowski,et al.  Automatic window factor analysis—A more efficient method for determining concentration profiles from evolutionary spectra , 1996 .

[47]  Plasma process control with optical emission spectroscopy , 1995, Seventeenth IEEE/CPMT International Electronics Manufacturing Technology Symposium. 'Manufacturing Technologies - Present and Future'.

[48]  Alfred E. Dunlop,et al.  Managing complexity in IC design — Past, present, and future , 1997, Bell Labs Technical Journal.

[49]  Duane S. Boning,et al.  Spatial characterization of wafer state using principal component analysis of optical emission spectra in plasma etch , 1997 .

[50]  Benoît Maag,et al.  The environmental impact of copper CMP , 2000 .

[51]  Mark R. Pinto,et al.  The future of solid-state electronics , 1997, Bell Labs Technical Journal.

[52]  Barry M. Wise,et al.  Development and Benchmarking of Multivariate Statistical Process Control Tools for a Semiconductor Etch Process: Improving Robustness through Model Updating , 1997 .

[53]  Paul Geladi,et al.  Principal Component Analysis , 1987, Comprehensive Chemometrics.

[54]  S. Rao,et al.  Automatic synthesis of equipment recipes from specified wafer-state transitions , 1997 .

[55]  R. Small,et al.  Evaluating and treating CMP wastewater , 2000 .

[56]  David J. Stein,et al.  In-line monitoring of chemical-mechanical polishing processes , 1999, Advanced Lithography.

[57]  Lennart Ljung,et al.  System Identification: Theory for the User , 1987 .

[58]  James P. Roland,et al.  Endpoint detection in plasma etching , 1985 .

[59]  P. Packan,et al.  Pushing the Limits , 1999, Science.

[60]  Michael J. Pazzani,et al.  Knowledge discovery from data? , 2000, IEEE Intell. Syst..

[61]  Hong Hocheng,et al.  Kinematic Analysis and Measurement of Temperature Rise on a Pad in Chemical Mechanical Planarization , 1999 .

[62]  G.E. Moore,et al.  Cramming More Components Onto Integrated Circuits , 1998, Proceedings of the IEEE.

[63]  H. H. Hosack,et al.  Recent advances in process synthesis for semiconductor devices , 1998 .

[64]  Edward A. Rietman,et al.  Dynamic images of plasma processes: Use of Fourier blobs for endpoint detection during plasma etching of patterned wafers , 1998 .

[65]  P Biolsi,et al.  An Advanced Endpoint Solution for , 1996 .