Manufacturing of environment friendly biolubricants from vegetable oils

Abstract Environment friendly products such as fuels and lubricants are among the candidates which are studied in several countries including Egypt. The purpose of this work was to utilize commercially available palm oil and Jatropha oil for the production of biolubricants, through two stages of Transesterification. The first stage is the process of using methanol in the presence of potassium hydroxide to produce biodiesel. The second stage is the reaction of biodiesel with trimethylolpropane using sodium methoxide as catalyst to yield palm or Jatropha oil base trimethylolpropane esters (biolubricants). Palm oil based trimethylolpropane esters with yield of 97.8% was obtained after 4 h of reaction at 130 °C. Under similar reaction conditions, Jatropha oil based trimethylolpropane esters with a yield of 98.2% was obtained. The resulting products were confirmed by FTIR and evaluated by ASTM analyses. The obtained Jatropha oil based trimethylolpropane esters exhibited high viscosity indices (1 4 0), low pour point temperature (−3 °C), and moderate thermal stabilities and met the requirement of commercial industrial oil ISO VG46 grade. In spite of the high pour point of Palm oil based trimethylolpropane esters (5 °C), which needs pour point depressant to reduce the pour point, other lubrication properties such as viscosity, viscosity indices and flash point are comparable to commercial industrial oil ISO VG32 and VG46.

[1]  Sevim Z. Erhan,et al.  Depression of pour points of vegetable oils by blending with diluents used for biodegradable lubricants , 1999 .

[2]  A. Broekhuis,et al.  Synthesis and properties of highly branched Jatropha curcas L. oil derivatives , 2011 .

[3]  A. Idris,et al.  Synthesis of palm based biolubricant in an oscillatory flow reactor (OFR) , 2014 .

[4]  Hugh Spikes,et al.  Low-temperature flow behaviour of vegetable oil-based lubricants , 2012 .

[5]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[6]  A. Singh,et al.  10-Undecenoic acid-based polyol esters as potential lubricant base stocks , 2012 .

[7]  D. Leung,et al.  A review on biodiesel production using catalyzed transesterification , 2010 .

[8]  F. Luna,et al.  Assessment of biodegradability and oxidation stability of mineral, vegetable and synthetic oil samples , 2011 .

[9]  Ponnekanti Nagendramma,et al.  Development of ecofriendly/biodegradable lubricants: An overview , 2012 .

[10]  R. J. Bishop,et al.  Modern physical metallurgy and materials engineering : science, process, applications , 1999 .

[11]  M. Schneider,et al.  Plant-oil-based lubricants and hydraulic fluids , 2006 .

[12]  P. A. Willermet.  Topics in transmission tribology , 1999 .

[13]  Braham Prakash,et al.  Tribochemical Wear of Rail Steels Lubricated with Synthetic Ester-Based Model Lubricants , 2004 .

[14]  G. Sriram,et al.  Synthesis, Chemical Modification and Tribological Evaluation of Plant oil as Bio-Degradable Low Temperature Lubricant , 2012 .

[15]  Development, optimization and scale-up of biodiesel production from crude palm oil and effective use in developing countries , 2013 .

[16]  Z. Mouloungui,et al.  Comparison of the thermal behaviour of some fatty esters and related ethers by TGA–DTA analysis , 1999 .

[17]  Andrew G. Glen,et al.  APPL , 2001 .

[18]  G. Stachowiak,et al.  Vegetable oil-based lubricants—A review of oxidation , 2007 .

[19]  Sevim Z. Erhan,et al.  Oxidation and low temperature stability of vegetable oil-based lubricants , 2006 .

[20]  A. Igartua,et al.  Vegetable oils as hydraulic fluids for agricultural applications , 2011 .

[21]  A. Dalai,et al.  Green synthesis of biolubricant base stock from canola oil , 2013 .