Life cycle assessment and life cycle cost implications for roofing and floor designs in residential buildings

This paper describes life cycle assessment (LCA) and life cycle cost (LCC) analysis for typical Australian houses. It reports how different roofing (i.e. roof and ceiling) and floor designs affect the life cycle environmental impacts and cost (LCEI & LCC) over the various life stages of buildings (i.e. construction, operation, maintenance and final disposal). A case study house, called Base House, was modified with 8 alternative roofing and 4 floor designs to generate 12 variant houses. Specifically, one variable either from roofing or from floor was varied at a time while keeping wall and other components as in the Base House. The four life cycle environmental impacts were greenhouse gas (GHG) emission, cumulative energy demand (CED), water use, and solid waste generation, evaluated by LCA approach. The LCC was estimated based on life cycle costing approach. The results of LCEI & LCC of each house were evaluated on a whole of life cycle basis. A number of trades-off on the houses modified with roofing and floor designs were identified based on LCEI & LCC results. For the houses modified with roofing and floor designs, the high star skillion flat roofing and mixed floor houses were the attractive trades-off.

[1]  Angelo Delsante,et al.  A VALIDATION OF THE 'ACCURATE' SIMULATION ENGINE USING BESTEST , 2004 .

[2]  Adisa Azapagic,et al.  Environmental impacts of the UK residential sector: Life cycle assessment of houses , 2012 .

[3]  Robin Drogemuller,et al.  Technology, Design and Process Innovation in the Built Environment , 2009 .

[4]  Janet Elizabeth Henriksen.  The value of design in reducing energy use and CO2-e impact over the life cycle of a detached dwelling in a temperate climate , 2006 .

[5]  Margaret Jollands,et al.  Optimization approach of balancing life cycle cost and environmental impacts on residential building design , 2015 .

[6]  B. Solberg,et al.  Environmental and economic impacts of substitution between wood products and alternative materials: a review of micro-level analyses from Norway and Sweden , 2005 .

[7]  M Dewsbury,et al.  Comparison of Test Cell Thermal Performance and the Empirical Validation of AccuRate in a Cool Temperate Climate , 2009 .

[8]  Xiaoming Wang,et al.  Assessment of climate change impact on residential building heating and cooling energy requirement in Australia , 2010 .

[9]  Adisa Azapagic,et al.  Life cycle assessment and multiobjective optimisation , 1999 .

[10]  Ke Li,et al.  Environmental Impacts over the Life Cycle of Residential Buildings Using Different Exterior Wall Systems , 2009 .

[11]  Seppo Junnila,et al.  Life cycle management of energy-consuming products in companies using IO-LCA , 2008 .

[12]  Mats Öberg,et al.  Life cycle costs and affordability perspectives for multi-dwelling buildings in Sweden , 2001 .

[13]  Steven Blanchard.  Life Cycle Analysis of a Residential Home in Michigan , 1998 .

[14]  A. Carre,et al.  A comparative life cycle assessment of alternative constructions of a typical Australian house design , 2011 .

[15]  O. Ortíz-Rodriguez,et al.  Life cycle assessment of two dwellings: one in Spain, a developed country, and one in Colombia, a country under development. , 2010, The Science of the total environment.

[16]  A. Cowie,et al.  The decomposition of wood products in landfills in Sydney, Australia. , 2008, Waste management.

[17]  Eva Sterner,et al.  Life-cycle costing and its use in the Swedish building sector , 2000 .

[18]  Robert H. Crawford,et al.  Life cycle water analysis of a residential building and its occupants , 2011 .

[19]  G. Keoleian,et al.  Life‐Cycle Energy, Costs, and Strategies for Improving a Single‐Family House , 2000 .

[20]  Joseph P. Morrissey,et al.  Life cycle cost implications of energy efficiency measures in new residential buildings , 2011 .

[21]  Craig Langston.  Life-Cost Approach to Building Evaluation , 2005 .

[22]  Margaret Jollands,et al.  Life cycle assessment and life cycle cost implications of wall assemblages designs , 2014 .

[23]  Bruce Lippke,et al.  CORRIM: Life-Cycle Environmental Performance of Renewable Building Materials , 2004 .

[24]  Seppo Junnila,et al.  Combining life cycle costing and life cycle assessment for an analysis of a new residential district energy system design , 2013 .

[25]  Dominique Derome,et al.  Using life cycle assessment to derive an environmental index for light-frame wood wall assemblies , 2010 .

[26]  Zsuzsa Szalay.  Life cycle environmental impacts of residential buildings , 2007 .

[27]  Chris Hendrickson,et al.  Economic Input-output Life-cycle Assessment of U.S. Residential Buildings , 2002 .

[28]  Roger Fay,et al.  Costs of improving the thermal performance of houses in a cool-temperate climate , 2009 .

[29]  M Islam.  Use of material in residential house design: an optimisation approach balancing life cycle cost & life cycle environmental impact , 2012 .

[30]  Usha Iyer-Raniga,et al.  Evaluation of whole life cycle assessment for heritage buildings in Australia , 2012 .

[31]  Margaret Jollands,et al.  Life cycle assessment and life cycle cost implication of residential buildings - A review , 2015 .

[32]  Martin Belusko,et al.  Cost Analyses of Measures to Improve Residential Energy Ratings to 6 Stars - Playford North Development, South Australia , 2010 .

[33]  Weimin Wang.  A simulation-based optimization system for green building design , 2005 .

[34]  Andreas Uihlein,et al.  Options to reduce the environmental impacts of residential buildings in the European Union—Potential and costs , 2010 .