Rheological law and constitutive model for superplastic deformation of Ti-6Al-4V

[1]  L. Zhuang,et al.  Physically based constitutive analysis and microstructural evolution of AA7050 aluminum alloy during hot compression , 2016 .

[2]  Sung Ho Lee,et al.  Characterization of the hot deformation behavior and microstructural evolution of Ti–6Al–4V sintered preforms using materials modeling techniques , 2016 .

[3]  Miaoquan Li,et al.  The flow behavior and the deformation mechanisms of Ti–6Al–2Zr–2Sn–2Mo–1.5Cr–2Nb alloy during isothermal compression , 2016 .

[4]  Vincent Velay,et al.  Behavior modeling and microstructural evolutions of Ti–6Al–4V alloy under hot forming conditions , 2016 .

[5]  Roger C. Reed,et al.  On the mechanisms of superplasticity in Ti–6Al–4V , 2016 .

[6]  M. Fu,et al.  Deformation behavior and microstructure evolution in thermal-aided mesoforming of titanium dental abutment , 2016 .

[7]  C. Ren,et al.  Temperature dependent work hardening in Ti–6Al–4V alloy over large temperature and strain rate ranges: Experiments and constitutive modeling , 2015 .

[8]  R. Reed,et al.  Superplasticity in Ti–6Al–4V: Characterisation, modelling and applications , 2015 .

[9]  Jun Zhao,et al.  A comparative study on Johnson–Cook constitutive modeling for Ti–6Al–4V alloy using automated ball indentation (ABI) technique , 2015 .

[10]  L. Geng,et al.  Mechanisms behind the superplastic behavior of as-extruded TiBw/Ti6Al4V composites with a network architecture , 2015 .

[11]  L. Xiaoqiang,et al.  Modeling and Simulation for the Stress Relaxation Behavior of Ti-6Al-4V at Medium Temperature , 2015 .

[12]  V. Uthaisangsuk,et al.  Modeling of flow behavior of Ti–6Al–4V alloy at elevated temperatures , 2014 .

[13]  Nitin Kotkunde,et al.  Comparative study of constitutive modeling for Ti–6Al–4V alloy at low strain rates and elevated temperatures , 2014 .

[14]  Xiao Junjie,et al.  Constitutive modeling and the effects of strain-rate and temperature on the formability of Ti–6Al–4V alloy sheet , 2014 .

[15]  Z. Guan,et al.  Constitutive equations with varying parameters for superplastic flow behavior of Al–Zn–Mg–Zr alloy , 2014 .

[16]  Zhengyi Jiang,et al.  Effects of hydrogen on the hot deformation behaviour of Ti-6Al-4V alloy: experimental and constitutive model studies , 2013 .

[17]  Fuguo Li,et al.  A modified constitutive equation for elevated temperature flow behavior of Ti–6Al–4V alloy based on double multiple nonlinear regression , 2013 .

[18]  Tongsheng Deng,et al.  Constitutive modeling and microstructure change of Ti–6Al–4V during the hot tensile deformation , 2012 .

[19]  A. Khan,et al.  Deformation induced anisotropic responses of Ti–6Al–4V alloy. Part I: Experiments , 2012 .

[20]  C. Rocco,et al.  FE simulation and experimental considerations on TI alloy superplastic forming for aerospace applications , 2010 .

[21]  K. Weinmann,et al.  Correlation of finite element analysis to superplastic forming experiments , 2007 .

[22]  B. Verlinden,et al.  Deformation Mechanisms of Ti-6Al-4V During Tensile Behavior at Low Strain Rate , 2007 .

[23]  Luigi Carrino,et al.  A posteriori optimisation of the forming pressure in superplastic forming processes by the finite element method , 2003 .

[24]  Jianguo Lin,et al.  Selection of material models for predicting necking in superplastic forming , 2003 .

[25]  F. Froes,et al.  Superior superplastic behavior in fine-grained Ti-6Al-4V sheet , 2002 .

[26]  Jianguo Lin,et al.  Modelling grain growth evolution and necking in superplastic blow-forming , 2001 .

[27]  Ridha Hambli,et al.  Numerical pressure prediction algorithm of superplastic forming processes using 2D and 3D models , 2001 .

[28]  Amit K. Ghosh,et al.  Mechanical behavior and hardening characteristics of a superplastic Ti-6AI-4V alloy , 1979 .

[29]  V. S. Senthil Kumar,et al.  Mathematical Modeling and Finite Element Analysis of Superplastic Forming of Ti-6Al-4 V Alloy in a Stepped Rectangular Die , 2013 .

[30]  G. C. Wang,et al.  Superplastic Behaviour and Microstructural Evolution in Stepped Tensile Deformation of Titanium Alloy , 2013, Journal of Materials Engineering and Performance.