Miniature specimen shear punch test for UHMWPE used in total joint replacements.

[1]  Percy Williams Bridgman,et al.  Studies in large plastic flow and fracture , 1964 .

[2]  Roydhouse Rh,et al.  Punch shear strengths of zinc phosphate cement and calcium hydroxide mixtures. , 1969 .

[3]  R. H. Roydhouse.  Punch-Shear Test for Dental Purposes , 1970, Journal of dental research.

[4]  D. Smith,et al.  The determination of shear strength. A method using a micro-punch apparatus , 1971, British Dental Journal.

[5]  Punch shear strength of base cements. I. Effect of aging and water storage on polycarboxylate and zinc phosphate cements. , 1975 .

[6]  L. Steagall,et al.  Punch shear strength of polycarboxylate cements. , 1978, The Journal of prosthetic dentistry.

[7]  Otto K. Harling,et al.  The development of a miniaturized disk bend test for the determination of postirradiation mechanical properties , 1981 .

[8]  R. R. Johnson,et al.  Punch shear testing of extracted vital and endodontically treated teeth. , 1983, Journal of biomechanics.

[9]  Christian G'Sell,et al.  Application of the plane simple shear test for determination of the plastic behaviour of solid polymers at large strains , 1983 .

[10]  G. E. Lucas,et al.  Shear punch tests for mechanical property measurements in TEM disc-sized specimens , 1984 .

[11]  D. Bartel,et al.  The effect of conformity, thickness, and material on stresses in ultra-high molecular weight components for total joint replacement. , 1986, The Journal of bone and joint surgery. American volume.

[12]  Effect of adding 0.05 per cent sodium fluoride to composite resin, on the punch shear strength. , 1986 .

[13]  Hideaki Takahashi,et al.  Characterization of Fracture Behavior in Small Punch Test by Combined Recrystallization-Etch Method and Rigid Plastic Analysis , 1987 .

[14]  J. V. von Fraunhofer,et al.  The punch-shear strength of six cavity liners. , 1987, Dental materials : official publication of the Academy of Dental Materials.

[15]  Elastic properties of air- and liquid-filled lung parenchyma. , 1988, Journal of applied physiology.

[16]  H. Takahashi,et al.  Small punch test to predict ductile fracture toughness JIC and brittle fracture toughness KIC , 1991 .

[17]  H. Messer,et al.  Are endodontically treated teeth more brittle? , 1992, Journal of endodontics.

[18]  Quantitative measurements of Young's modulus using the miniaturized disk-bend test , 1995 .

[19]  D R Boughner,et al.  Glutaraldehyde fixation alters the internal shear properties of porcine aortic heart valve tissue. , 1995, The Annals of thoracic surgery.

[20]  D. Bartel,et al.  Stresses in polyethylene components of contemporary total knee replacements. , 1995, Clinical orthopaedics and related research.

[21]  K. Saum,et al.  The Otto Aufranc Award. Impact of gamma sterilization on clinical performance of polyethylene in the hip. , 1995, Clinical orthopaedics and related research.

[22]  T. K. Parnell,et al.  Fracture Toughness by Small Punch Testing , 1995 .

[23]  M. Piggott,et al.  Shear strength of polymers and fibre composites: 1. thermoplastic and thermoset polymers , 1995 .

[24]  M. Peters,et al.  The strength of auto-cured and light-cured materials. The shear punch test. , 1996, Australian dental journal.

[25]  R. D. Paxson,et al.  Effects of Sterilization on Wear in Total Knee Arthroplasty , 1996, Clinical orthopaedics and related research.

[26]  Boughner Dr,et al.  Internal shear properties of fresh porcine aortic valve cusps: implications for normal valve function. , 1996 .

[27]  K. Saum,et al.  Impact of gamma sterilization on clinical performance of polyethylene in the knee. , 1996, The Journal of arthroplasty.

[28]  R. Sakaguchi,et al.  Testing mode and surface treatment effects on dentin bonding. , 1996, Journal of biomedical materials research.

[29]  John J. Callaghan,et al.  The Adult Hip , 1997 .

[30]  W H Harris,et al.  Wear of Polyethylene Acetabular Components in Total Hip Arthroplasty. An Analysis of One Hundred and Twenty-eight Components Retrieved at Autopsy or Revision Operations* , 1997, The Journal of bone and joint surgery. American volume.

[31]  R. Gul.  Improved UHMWPE for use in total joint replacement , 1997 .

[32]  C. Jewett,et al.  Validation of a small punch testing technique to characterize the mechanical behaviour of ultra-high-molecular-weight polyethylene. , 1997, Biomaterials.

[33]  A. Donald,et al.  Time resolved simultaneous small- and wide-angle X-ray scattering during polyethylene deformation—II. Cold drawing of linear polyethylene , 1998 .

[34]  M. Piggott,et al.  Fracture failure processes in polymers. II: Fractographic evidence , 1998 .

[35]  J. Arnold,et al.  The Use of Miniature Disc Bend Tests with Plastic Materials , 1998 .

[36]  D L Bartel,et al.  Residual stresses in ultra‐high molecular weight polyethylene loaded cyclically by a rigid moving indenter in nonconforming geometries , 1998, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[37]  D. Bartel,et al.  Postirradiation Aging Affects Stress and Strain in Polyethylene Components , 1998, Clinical orthopaedics and related research.

[38]  C. Jewett,et al.  The yielding, plastic flow, and fracture behavior of ultra-high molecular weight polyethylene used in total joint replacements. , 1998, Biomaterials.

[39]  M. Piggott,et al.  Fracture failure processes in polymers. I : Mechanical tests and results , 1998 .

[40]  A. Wang,et al.  Lubrication and wear of ultra-high molecular weight polyethylene in total joint replacements , 1998 .

[41]  Evans Db,et al.  Shear bond strength of composite resin and amalgam adhesive systems to dentin. , 1999 .

[42]  C. Jewett,et al.  Radiation and chemical crosslinking promote strain hardening behavior and molecular alignment in ultra high molecular weight polyethylene during multi-axial loading conditions. , 1999, Biomaterials.

[43]  M. Ludwig,et al.  Elastic moduli of excised constricted rat lungs. , 1999, Journal of applied physiology.

[44]  C. Jewett,et al.  A miniature specimen mechanical testing technique scaled to articulating surface of polyethylene components for total joint arthroplasty. , 1999, Journal of biomedical materials research.

[45]  A. Edidin,et al.  Advances in the processing, sterilization, and crosslinking of ultra-high molecular weight polyethylene for total joint arthroplasty. , 1999, Biomaterials.

[46]  C. Jewett,et al.  Plasticity-induced damage layer is a precursor to wear in radiation-cross-linked UHMWPE acetabular components for total hip replacement. Ultra-high-molecular-weight polyethylene. , 1999, The Journal of arthroplasty.

[47]  J. Currier,et al.  Effect of fabrication method and resin type on performance of tibial bearings. , 2000, Journal of biomedical materials research.

[48]  A. Edidin,et al.  Influence of mechanical behavior on the wear of 4 clinically relevant polymeric biomaterials in a hip simulator. , 2000, The Journal of arthroplasty.

[49]  V. Goldberg,et al.  The relationship between the clinical performance and large deformation mechanical behavior of retrieved UHMWPE tibial inserts. , 2000, Biomaterials.

[50]  L. Knobloch,et al.  Adhesion testing of a denture base resin with 5 casting alloys. , 2000, Journal of prosthodontics : official journal of the American College of Prosthodontists.

[51]  C. Jewett,et al.  Degradation of mechanical behavior in UHMWPE after natural and accelerated aging. , 2000, Biomaterials.

[52]  A. Edidin,et al.  Development and Validation of the Small Punch Test for Uhmwpe Used in Total Joint Replacements , 2000, Materials: Book of Abstracts.

[53]  S M Kurtz,et al.  A small punch test technique for characterizing the elastic modulus and fracture behavior of PMMA bone cement used in total joint replacement. , 2001, Biomaterials.

[54]  Clare M. Rimnac,et al.  Mechanical behavior, wear surface morphology, and clinical performance of UHMWPE acetabular components after 10 years of implantation , 2001 .