A generic force-closure analysis algorithm for cable-driven parallel manipulators
暂无分享,去创建一个
Guilin Yang | Song Huat Yeo | S. K. Mustafa | Shabbir Kurbanhusen Mustafa | Wen Bin Lim | Guilin Yang | S. Yeo | W. Lim
[1] Ou Ma,et al. Workspace Determination of General 6-d.o.f. Cable Manipulators , 2008, Adv. Robotics.
[2] Elena R. Messina,et al. Design and workspace analysis of a 6–6 cable-suspended parallel robot , 2004 .
[3] Mustafa Shabbir Kurbanhusen,et al. Force-closure workspace analysis of cable-driven parallel mechanisms , 2006 .
[4] Sadao Kawamura,et al. High-speed manipulation by using parallel wire-driven robots , 2000, Robotica.
[5] So-Ryeok Oh,et al. Generation of feasible set points and control of a cable robot , 2006, IEEE Transactions on Robotics.
[6] Richard M. Murray,et al. A Mathematical Introduction to Robotic Manipulation , 1994 .
[7] Keiko Homma,et al. A wire-driven leg rehabilitation system: development of a 4-DOF experimental system , 2003, Proceedings 2003 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM 2003).
[8] Marc Gouttefarde,et al. Characterizations of Fully Constrained Poses of Parallel Cable-Driven Robots: A Review , 2008 .
[9] Jadran Lenarčič,et al. Advances in Robot Kinematics , 2000 .
[10] Vijay R. Kumar,et al. Workspaces of Cable-Actuated Parallel Manipulators , 2006 .
[11] Guilin Yang,et al. Self-Calibration of a Biologically Inspired 7 DOF Cable-Driven Robotic Arm , 2008, IEEE/ASME Transactions on Mechatronics.
[12] James S. Albus,et al. The NIST robocrane , 1993, J. Field Robotics.
[13] J. Stoer,et al. Convexity and Optimization in Finite Dimensions I , 1970 .
[14] Jean-Pierre Merlet,et al. Determination of the wrench-closure workspace of 6-DOF parallel cable-driven mechanisms , 2006, ARK.
[15] Carlo Ferraresi,et al. A new methodology for the determination of the workspace of six-DOF redundant parallel structures actuated by nine wires , 2006, Robotica.
[16] Sadao Kawamura,et al. Realization of a virtual sports training system with parallel wire mechanism , 1997, Proceedings of International Conference on Robotics and Automation.
[17] Imme Ebert-Uphoff,et al. Wrench-feasible workspace generation for cable-driven robots , 2006, IEEE Transactions on Robotics.
[18] Mohammad Eghtesad,et al. Workspace Analysis for Planar and Spatial Redundant Cable Robots , 2009 .