A Dynamic Circuit Model of a Small Direct Methanol Fuel Cell for Portable Electronic Devices

Direct methanol fuel cells (DMFCs) constitute nowadays a promising alternative to lithium ion batteries for powering portable devices. The effective design of power-management units for interfacing DMFCs requires accurate models able to account for variable-load conditions and fuel consumption. A dynamic nonlinear circuit model for passive methanol fuel cells is presented in this paper. The model takes into account mass transport, current generation, electronic and protonic conduction, methanol adsorption, and electrochemical kinetics. Adsorption and oxidation rates, which mostly affect the cell dynamics, are modeled by a detailed two-step reaction mechanism. The fully coupled multiphysics equivalent circuit is solved by assembling first-order differential equations into a nonlinear state-variable system in order to simulate the electrical evolution of the fuel cell from its initial conditions. The fuel-cell discharge and methanol consumption are computed by combining mass-transport and conservation equations. As a result, the runtime of a DMFC can be predicted from the current load and the initial methanol concentration.

[1]  Carlos Andrés Ramos-Paja,et al.  Minimum Fuel Consumption Strategy for PEM Fuel Cells , 2009, IEEE Transactions on Industrial Electronics.

[2]  Piergiorgio Alotto,et al.  Modeling non‐linear passive direct methanol fuel cells , 2009 .

[3]  Shimshon Gottesfeld,et al.  Water and Methanol Uptakes in Nafion Membranes and Membrane Effects on Direct Methanol Cell Performance , 2000 .

[4]  James Larminie,et al.  Fuel Cell Systems Explained , 2000 .

[5]  Kai Sundmacher,et al.  A model for the liquid feed direct methanol fuel cell , 1999 .

[6]  Jae Hyuk Jang,et al.  Micro-fuel cells—Current development and applications , 2007 .

[7]  James Larminie,et al.  Fuel Cell Systems Explained: Larminie/Fuel Cell Systems Explained , 2003 .

[8]  Jorge L. Duarte,et al.  Line-Interactive UPS Using a Fuel Cell as the Primary Source , 2008, IEEE Transactions on Industrial Electronics.

[9]  R. O’Hayre,et al.  Fuel Cell Fundamentals , 2005 .

[10]  M. D. Rooij,et al.  Electrochemical Methods: Fundamentals and Applications , 2003 .

[11]  Yang Wang,et al.  A semi-empirical method for electrically modeling of fuel cell: Executed on a direct methanol fuel cell , 2008 .

[12]  S. Srinivasan,et al.  Fuel Cells: From Fundamentals to Applications , 2006 .

[13]  Alexandra M.F.R. Pinto,et al.  A comparative study of approaches to direct methanol fuel cells modelling , 2007 .

[14]  F. Moro,et al.  Optimal Design of Micro Direct Methanol Fuel Cells for Low-Power Applications , 2009, IEEE Transactions on Magnetics.

[15]  T. Springer,et al.  Polymer Electrolyte Fuel Cell Model , 1991 .

[16]  Xinbo Ruan,et al.  A Hybrid Fuel Cell Power System , 2009, IEEE Transactions on Industrial Electronics.

[17]  Weiwei Yang,et al.  A transient two-phase mass transport model for liquid feed direct methanol fuel cells , 2008 .

[18]  Roger Dougal,et al.  Mathematical Model of a Direct Methanol Fuel Cell , 2004, 2003.04083.

[19]  Enrico Negro,et al.  A Pt–Fe Carbon Nitride Nano‐electrocatalyst for Polymer Electrolyte Membrane Fuel Cells and Direct‐Methanol Fuel Cells: Synthesis, Characterization, and Electrochemical Studies , 2007 .

[20]  Rong Chen,et al.  Mathematical modeling of a passive-feed DMFC with heat transfer effect , 2005 .

[21]  Wenpeng Liu,et al.  Three-Dimensional Simulations of Liquid Feed Direct Methanol Fuel Cells , 2007 .

[22]  Keith Scott,et al.  Performance and modelling of a direct methanol solid polymer electrolyte fuel cell , 1997 .

[23]  Rongzhong Jiang,et al.  Power management of a direct methanol fuel cell system , 2006 .

[24]  Prasad N. Enjeti,et al.  Analysis of Common-Mode Voltage in Utility-Interactive Fuel Cell Power Conditioners , 2009, IEEE Transactions on Industrial Electronics.

[25]  Enrico Negro,et al.  Polymer electrolyte fuel cells based on bimetallic carbon nitride electrocatalysts , 2008 .