论文信息 - A Micro-positioning Parallel Mechanism Platform with 100-degree Tilting Capability

A Micro-positioning Parallel Mechanism Platform with 100-degree Tilting Capability

Abstract This paper presents a micro-positioning platform based on the unique parallel mechanism recently developed by the authors. The platform has a meso-scale rectangular shape whose size is 20 × 23 mm. The stroke is 5 mm for both the x - and y -axis and 100 degrees for the α -axis (the rotational axis along the x -axis). The platform is actuated by the three sets of two-stage linear actuators: a linear motor for rough positioning and a piezo actuator for fine positioning. The platform is already assembled. The detailed design issues, including the kinematic analysis, and the experimental results of the positioning measurements and control performance, are presented.

[1] T. Hirano,et al. Microfactories; new applications of micromachine technology to the manufacture of small products , 1997 .

[2] Xin-Jun Liu,et al. Optimal design of a micro parallel positioning platform. Part II: Real machine design , 2005, Robotica.

[3] Xin-Jun Liu,et al. Optimal design of a micro parallel positioning platform. Part I: Kinematic analysis , 2004, Robotica.

[4] Kazuki Ichikawa,et al. An in-parallel actuated manipulator with redundant actuators for gross and fine motions , 2003, 2003 IEEE International Conference on Robotics and Automation (Cat. No.03CH37422).

[5] Hidenori Shinno,et al. High Speed Nanometer Positioning Using a Hybrid Linear Motor , 2001 .

[6] Yoshimi Takeuchi,et al. Development of a 5-Axis Control Ultraprecision Milling Machine for Micromachining Based on Non-Friction Servomechanisms , 2000 .