ANN Modeling of Cutting Performances in Spray Cooling Assisted Hard Turning

[1]  Tadeusz Mikolajczyk,et al.  Predicting tool life in turning operations using neural networks and image processing , 2018 .

[2]  N. Sidik,et al.  An overview of current status of cutting fluids and cooling techniques of turning hard steel , 2017 .

[3]  M. Saleem,et al.  High-feed turning of AISI D2 tool steel using multi-radii tool inserts: Tool life, material removed, and workpiece surface integrity evaluation , 2017 .

[4]  Mozammel Mia,et al.  Prediction of surface roughness in hard turning under high pressure coolant using Artificial Neural Network , 2016 .

[5]  Mozammel Mia,et al.  Response surface and neural network based predictive models of cutting temperature in hard turning , 2016, Journal of advanced research.

[6]  B. B. Biswal,et al.  Comparative Assessment on Machinability Aspects of AISI 4340 Alloy Steel Using Uncoated Carbide and Coated Cermet Inserts During Hard Turning , 2016 .

[7]  Ashok Kumar Sahoo,et al.  Performance assessment in hard turning of AISI 1015 steel under spray impingement cooling and dry environment , 2015 .

[8]  S. K. Choudhury,et al.  Machining of hardened steel—Experimental investigations, performance modeling and cooling techniques: A review , 2015 .

[9]  Ashok Kumar Sahoo,et al.  Response surface and artificial neural network prediction model and optimization for surface roughness in machining , 2015 .

[10]  Purna Chandra Mishra,et al.  Comparative Performance In Hard Turning Of AISI 1015 Steel With Carbide Insert Using Orthogonal Array Design And Grey Relational Analysis Under Spray Impingement Cooling And Dry Environment: A Case Study , 2014, Int. J. Manuf. Mater. Mech. Eng..

[11]  J. Sharma,et al.  Investigation of effects of dry and near dry machining on AISI D2 steel using vegetable oil , 2014 .

[12]  E. Kirubakaran,et al.  Surface Roughness Prediction using Artificial Neural Network in Hard Turning of AISI H13 Steel with Minimal Cutting Fluid Application , 2014 .

[13]  Ramón Quiza,et al.  Comparing statistical models and artificial neural networks on predicting the tool wear in hard machining D2 AISI steel , 2008 .

[14]  Vishal S. Sharma,et al.  Estimation of cutting forces and surface roughness for hard turning using neural networks , 2008, J. Intell. Manuf..

[15]  J. Paulo Davim,et al.  Modelling of surface finish and tool flank wear in turning of AISI D2 steel with ceramic wiper inserts , 2007 .

[16]  Michael Y. Hu,et al.  Forecasting with artificial neural networks: The state of the art , 1997 .