A neural network-based approach for dynamic quality prediction in a plastic injection molding process

This paper presents an innovative neural network-based quality prediction system for a plastic injection molding process. A self-organizing map plus a back-propagation neural network (SOM-BPNN) model is proposed for creating a dynamic quality predictor. Three SOM-based dynamic extraction parameters with six manufacturing process parameters and one level of product quality were dedicated to training and testing the proposed system. In addition, Taguchi's parameter design method was also applied to enhance the neural network performance. For comparison, an additional back-propagation neural network (BPNN) model was constructed for which six process parameters were used for training and testing. The training and testing data for the two models respectively consisted of 120 and 40 samples. Experimental results showed that such a SOM-BPNN-based model can accurately predict the product quality (weight) and can likely be used for various practical applications.

[1]  Li Jia,et al.  A genetic neural fuzzy system-based quality prediction model for injection process , 2002 .

[2]  Prasad K. Yarlagadda,et al.  Development of an integrated neural network system for prediction of process parameters in metal injection moulding , 2002 .

[3]  Furong Gao,et al.  Injection molding product weight: Online prediction and control based on a nonlinear principal component regression model , 2006 .

[4]  C. K. Kwong,et al.  Application of artificial neural network and fuzzy logic in a case-based system for initial process parameter setting of injection molding , 2002, J. Intell. Manuf..

[5]  Kang Tai,et al.  An evolutionary approach for cooling system optimization in plastic injection moulding , 2004 .

[6]  Babur Ozcelik,et al.  Comparison of the warpage optimization in the plastic injection molding using ANOVA, neural network model and genetic algorithm , 2006 .

[7]  Kok Kiong Tan,et al.  Neural-network-based predictive learning control of ram velocity in injection molding , 2004, IEEE Transactions on Systems, Man, and Cybernetics, Part C (Applications and Reviews).

[8]  Teuvo Kohonen,et al.  Self-organized formation of topologically correct feature maps , 2004, Biological Cybernetics.

[9]  Chih-Ming Hsu.  Improving the electroforming process in optical recordable media manufacturing via an integrated procedure , 2004 .

[10]  W. I. Patterson,et al.  Control of part weight in injection molding of amorphous thermoplastics , 1999 .

[11]  Wen-Chin Chen,et al.  A neural-network approach for an automatic LED inspection system , 2007, Expert Syst. Appl..

[12]  Songcan Chen,et al.  Integrating the improved CBP model with kernel SOM , 2006, Neurocomputing.

[13]  D. B. Fogel,et al.  AN INFORMATION CRITERION FOR OPTIMAL NEURAL NETWORK SELECTION , 1990, 1990 Conference Record Twenty-Fourth Asilomar Conference on Signals, Systems and Computers, 1990..

[14]  Chao-Ton Su,et al.  Optimization of parameter design: An intelligent approach using neural network and simulated annealing , 2000, Int. J. Syst. Sci..

[15]  Jui-Ming Hang,et al.  Multi-objective optimization scheme for quality control in injection molding , 2002 .

[16]  Holger R. Maier,et al.  Understanding the behaviour and optimising the performance of back-propagation neural networks: an empirical study , 1998 .

[17]  B. S. Lim,et al.  Optimal design of neural networks using the Taguchi method , 1995, Neurocomputing.

[18]  Arie Ben-David,et al.  Control of properties in injection molding by neural networks , 2001 .

[19]  K. Chiang,et al.  Application of grey-fuzzy logic on the optimal process design of an injection-molded part with a thin shell feature , 2006 .

[20]  Soo-Chang Pei,et al.  Effective palette indexing for image compression using self-organization of Kohonen feature map , 2006, IEEE Transactions on Image Processing.

[21]  Hasan Kurtaran,et al.  Efficient warpage optimization of thin shell plastic parts using response surface methodology and genetic algorithm , 2006 .

[22]  Sang-Chan Park,et al.  A new intelligent SOFM-based sampling plan for advanced process control , 2001, Expert Syst. Appl..

[23]  B. Chen,et al.  An ANN-based element extraction method for automatic mesh generation , 2005, Expert Syst. Appl..

[24]  George F. List,et al.  Multiobjective optimization of a plastic injection molding process , 1994, IEEE Trans. Control. Syst. Technol..

[25]  Cheng-Hsien Wu,et al.  Effects of geometry and injection‐molding parameters on weld‐line strength , 2005 .

[26]  Shun-ichi Amari,et al.  Network information criterion-determining the number of hidden units for an artificial neural network model , 1994, IEEE Trans. Neural Networks.

[27]  Ming-Chih Huang,et al.  The effective factors in the warpage problem of an injection-molded part with a thin shell feature , 2001 .

[28]  D.R. Hush,et al.  Progress in supervised neural networks , 1993, IEEE Signal Processing Magazine.

[29]  Furong Gao,et al.  Melt temperature profile prediction for thermoplastic injection molding , 1999 .

[30]  Fanhuai Shi,et al.  Optimisation of Plastic Injection Moulding Process with Soft Computing , 2003 .

[31]  Henry C. W. Lau,et al.  Neural networks for the dimensional control of molded parts based on a reverse process model , 2001 .

[32]  B.H.M. Sadeghi,et al.  A BP-neural network predictor model for plastic injection molding process , 2000 .

[33]  T. Kohonen.  Self-organized formation of topographically correct feature maps , 1982 .

[34]  Simon Haykin,et al.  Neural Networks: A Comprehensive Foundation , 1998 .

[35]  Takashi Onoda,et al.  Neural network information criterion for the optimal number of hidden units , 1995, Proceedings of ICNN'95 - International Conference on Neural Networks.

[36]  Marizete Silva Santos,et al.  Using factorial design to optimise neural networks , 1999, IJCNN'99. International Joint Conference on Neural Networks. Proceedings (Cat. No.99CH36339).