Experimental evaluation of polymer-enhanced foam transportation on the foam stabilization in the porous media

[1]  Z. Pang,et al.  The macroscopic and microscopic analysis on the performance of steam foams during thermal recovery in heavy oil reservoirs , 2018, Fuel.

[2]  A. Davarpanah,et al.  A simulation study to control the oil production rate of oil-rim reservoir under different injectivity scenarios , 2018, Energy Reports.

[3]  K. Syverud,et al.  Interactions between Surfactants and Cellulose Nanofibrils for Enhanced Oil Recovery , 2018, Industrial & Engineering Chemistry Research.

[4]  P. Vlachos,et al.  Multi-objective history matching of surfactant-polymer flooding , 2018, Fuel.

[5]  S. Cox,et al.  Simulation of surfactant transport during the rheological relaxation of two-dimensional dry foams. , 2018, Physical review. E.

[6]  Afshin Davarpanah,et al.  A feasible visual investigation for associative foam >⧹ polymer injectivity performances in the oil recovery enhancement , 2018, European Polymer Journal.

[7]  A. Davarpanah,et al.  Simultaneous feasible injectivity of foam and hydrolyzed polyacrylamide to optimize the oil recovery enhancement , 2018, Energy Exploration & Exploitation.

[8]  Ming Luo,et al.  Foam-EOR method in fractured-vuggy carbonate reservoirs: Mechanism analysis and injection parameter study , 2018 .

[9]  Saman A. Aryana,et al.  Improved sweep efficiency due to foam flooding in a heterogeneous microfluidic device , 2018 .

[10]  Lin Sun,et al.  Oil recovery enhancement in low permeable and severe heterogeneous oil reservoirs via gas and foam flooding , 2018 .

[11]  Spencer E. Taylor.  Interfacial Chemistry in Steam-Based Thermal Recovery of Oil Sands Bitumen with Emphasis on Steam-Assisted Gravity Drainage and the Role of Chemical Additives , 2018 .

[12]  A. Al-yousef,et al.  SmartWater Synergy with Surfactant Polymer Flooding for Efficient Oil Mobilization in Carbonates , 2018 .

[13]  C. Pu,et al.  A study on oxygen consumption mechanism of air-foam flooding in low-temperature oil reservoir , 2018 .

[14]  Afshin Davarpanah,et al.  Integrated production logging tools approach for convenient experimental individual layer permeability measurements in a multi-layered fractured reservoir , 2018, Journal of Petroleum Exploration and Production Technology.

[15]  Bing Wei,et al.  Investigation of synergism between surface-grafted nano-cellulose and surfactants in stabilized foam injection process , 2018 .

[16]  Reza Shirmohammadi,et al.  Techno‐economic evaluation of standalone hybrid solar‐wind systems for small residential districts in the central desert of Iran , 2017 .

[17]  K. Mohanty,et al.  Foam flow in a layered, heterogeneous porous medium: A visualization study , 2017 .

[18]  Pengcheng Liu,et al.  Enhanced oil recovery by air-foam flooding system in tight oil reservoirs: Study on the profile-controlling mechanisms , 2017 .

[19]  Saman A. Aryana,et al.  An experimental investigation of nanoparticle-stabilized CO2 foam used in enhanced oil recovery , 2016 .

[20]  A. Telmadarreie.  New Insight on Carbonate-Heavy-Oil Recovery: Pore-Scale Mechanisms of Post-Solvent Carbon Dioxide Foam/Polymer-Enhanced-Foam Flooding , 2016 .

[21]  H. Li,et al.  Stability and mobility of foam generated by gas-solvent/surfactant mixtures under reservoir conditions , 2016 .

[22]  Jian Hou,et al.  Optimized polymer enhanced foam flooding for ordinary heavy oil reservoir after cross-linked polymer flooding , 2016, Journal of Petroleum Exploration and Production Technology.

[23]  S. Biswal,et al.  Effect of Surfactant Partitioning Between Gaseous Phase and Aqueous Phase on CO2\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{d , 2016, Transport in Porous Media.

[24]  Y. Cinar,et al.  A Laboratory and Numerical-Simulation Study of Co-Optimizing CO 2 Storage and CO 2 Enhanced Oil Recovery , 2015 .

[25]  Yang Zhang,et al.  CO2 foam flooding for improved oil recovery: Reservoir simulation models and influencing factors , 2015 .

[26]  Nina Kovalchuk,et al.  Current applications of foams formed from mixed surfactant-polymer solutions. , 2015, Advances in colloid and interface science.

[27]  Muhammad A. Manan,et al.  Effects of Nanoparticle Types on Carbon Dioxide Foam Flooding in Enhanced Oil Recovery , 2015 .

[28]  S. Cox.  Simulations of bubble division in the flow of a foam past an obstacle in a narrow channel , 2015 .

[29]  Keyu Liu,et al.  Investigation on a Novel Polymer with Surface Activity for Polymer Enhanced CO 2 Foam Flooding , 2015 .

[30]  Zehua Chen,et al.  Enhancing Heavy-Oil Recovery by Using Middle Carbon Alcohol-Enhanced Waterflooding, Surfactant Flooding, and Foam Flooding , 2015 .

[31]  G. Gochev.  Thin liquid films stabilized by polymers and polymer/surfactant mixtures , 2015 .

[32]  B. Wang,et al.  The Effect of Foam Stability on Foam Flooding Recovery , 2015 .

[33]  S. Cox.  Simulations of bubble division in the flow of a foam past an obstacle in a narrow channel , 2014 .

[34]  J. Bruining,et al.  Effect of Continuous, Trapped, and Flowing Gas on Performance of Alkaline Surfactant Polymer (ASP) Flooding , 2013 .

[35]  A. Yarin,et al.  Gravitational drainage of foam films. , 2013, Langmuir : the ACS journal of surfaces and colloids.

[36]  R. Farajzadeh,et al.  Foam-oil interaction in porous media: implications for foam assisted enhanced oil recovery. , 2012, Advances in colloid and interface science.

[37]  D. Langevin,et al.  Aqueous foams stabilized solely by particles , 2011 .

[38]  L. Benyahia,et al.  Rheology of associative polymer solutions , 2011 .

[39]  R. Klitzing,et al.  Polyelectrolytes in thin liquid films , 2010 .

[40]  F. Monroy,et al.  Interfacial rheology of polyelectrolytes and polymer monolayers at the air–water interface , 2010 .

[41]  Reinhard Miller,et al.  Foam films from oppositely charged polyelectolyte/surfactant mixtures: effect of polyelectrolyte and surfactant hydrophobicity on film stability. , 2010, Langmuir : the ACS journal of surfaces and colloids.

[42]  M. Corapcioglu,et al.  A micromodel analysis of factors influencing NAPL removal by surfactant foam flooding. , 2003, Journal of contaminant hydrology.

[43]  Anthony R. Kovscek,et al.  Fundamentals of foam transport in porous media , 1993 .

[44]  A. Fisher,et al.  Mathematical Modeling of Foam Flooding , 1990 .

[45]  J. Ratulowski,et al.  The apparent viscosity of foams in homogeneous bead packs , 1989 .