Fabrication of multi-layer SU-8 microstructures

The fabrication of multi-level SU-8 microstructures using multiple coating and exposure steps and a single developing step has been achieved for up to six layers of SU-8. Alternating layers of SU-8 2010 (thin) and SU-8 2100 (thick) photoresist films were spin coated, followed by soft-bake, ultraviolet (UV) exposure and post-exposure bake steps. The multiple SU-8 layers were simultaneously developed to create patterned microstructures with overall thicknesses of up to 500 µm and minimum lateral feature size of 10 µm. The use of a single developing step facilitated fabrication of complex multi-level SU-8 microstructures that might be difficult, or even impossible, to achieve by sequential processing of multiple SU-8 layers that are individually coated, baked, exposed and developed.

[1]  Christopher S. Chen,et al.  Cells lying on a bed of microneedles: An approach to isolate mechanical force , 2003, Proceedings of the National Academy of Sciences of the United States of America.

[2]  U. Wallrabe,et al.  Incorporating design rules into the LIGA technology applied to a fourier transformation spectrometer , 2004 .

[3]  Xin Zhang,et al.  Direct Writing of 3D Microstructures Using a Scanning Laser System , 2003 .

[4]  Lei Liu,et al.  Analysis of tensile strength and microstructure of Ni–SiC composites prepared by electroforming , 2005 .

[5]  S.C.O. Mathuna,et al.  Thick photoresist development for the fabrication of high aspect ratio magnetic coils , 2002 .

[6]  Yu-Chung Huang,et al.  UV-LIGA interferometer biosensor based on the SU-8 optical waveguide , 2005 .

[7]  H. Ueno,et al.  Direct writing for three-dimensional microfabrication using synchrotron radiation etching , 2000, Proceedings IEEE Thirteenth Annual International Conference on Micro Electro Mechanical Systems (Cat. No.00CH36308).

[8]  S. Quake,et al.  Microfluidic Large-Scale Integration , 2002, Science.

[9]  Chee Yoon Yue,et al.  Fabrication of large SU-8 mold with high aspect ratio microchannels by UV exposure dose reduction , 2004 .

[10]  Chii-Rong Yang,et al.  Ultrathick SU-8 mold formation and removal, and its application to the fabrication of LIGA-like micromotors with embedded roots , 2002 .

[11]  A. Mata,et al.  Fabrication of 3D micro-textured scaffolds for tissue engineering , 2005 .

[12]  Francis E. H. Tay,et al.  A novel micro-machining method for the fabrication of thick-film SU-8 embedded micro-channels , 2001 .

[13]  Peter Vettiger,et al.  High-aspect-ratio, ultrathick, negative-tone near-UV photoresist and its applications for MEMS , 1998 .

[14]  M. Brunet,et al.  Advanced photoresist technologies for microsystems , 2001 .

[15]  F. Tseng,et al.  Reduction of diffraction effect of UV exposure on SU-8 negative thick photoresist by air gap elimination , 2002 .

[16]  M. Tijero,et al.  Novel three-dimensional embedded SU-8 microchannels fabricated using a low temperature full wafer adhesive bonding , 2004 .

[17]  S. Jeanneret,et al.  Advanced deep reactive ion etching: a versatile tool for microelectromechanical systems , 1998 .

[18]  Mark G. Allen,et al.  Uncrosslinked SU-8 as a sacrificial material , 2005 .

[19]  Wanjun Wang,et al.  Microfabrication of an electromagnetic power relay using SU-8 based UV-LIGA technology , 2004 .

[20]  Hubert Lorenz,et al.  3D microfabrication by combining microstereolithography and thick resist UV lithography , 1999 .

[21]  K. Böhringer,et al.  Institute of Physics Publishing Journal of Micromechanics and Microengineering High-aspect Ratio Submicrometer Needles for Intracellular Applications , 2022 .

[22]  Hsiharng Yang,et al.  Improvement of thickness uniformity in nickel electroforming for the LIGA process , 2000 .

[23]  Sung-Keun Lee,et al.  3D microfabrication with inclined/rotated UV lithography , 2004 .

[24]  Tejal A Desai,et al.  Microtextured substrata alter gene expression, protein localization and the shape of cardiac myocytes. , 2003, Biomaterials.

[25]  Yong-Kweon Kim,et al.  UV-LIGA process for high aspect ratio structure using stress barrier and C-shaped etch hole , 2000 .

[26]  P. Renaud,et al.  Microfabrication of ceramic components by microstereolithography , 2004 .

[27]  Gwo-Bin Lee,et al.  A new fabrication process for ultra-thick microfluidic microstructures utilizing SU-8 photoresist , 2002 .

[28]  E. Fabrizio,et al.  Sharp beveled tip hollow microneedle arrays fabricated by LIGA and 3D soft lithography with polyvinyl alcohol , 2006 .

[29]  Michael J. Lancaster,et al.  SU-8 Ka-band filter and its microfabrication , 2005 .

[30]  Determination of Young’s modulus and residual stress of electroless nickel using test structures fabricated in a new surface micromachining process , 1996 .

[31]  Wanjun Wang,et al.  Using megasonic development of SU-8 to yield ultra-high aspect ratio microstructures with UV lithography , 2004 .

[32]  Reza Ghodssi,et al.  Investigation of gray-scale technology for large area 3D silicon MEMS structures , 2003 .

[33]  A. Peele,et al.  Specification of mechanical support structures to prevent SU-8 stiction in high aspect ratio structures , 2005 .

[34]  Philip Huie,et al.  Building thick photoresist structures from the bottom up , 2003 .

[35]  A. Mata,et al.  Microfabricated 3D Scaffolds for Tissue Engineering Applications , 2004 .

[36]  G. Engelmann,et al.  Complete 3D UV microfabrication technology on strongly sloping topography substrates using epoxy photoresist SU-8 , 2004 .

[37]  Roland Zengerle,et al.  Multi-layer SU-8 lift-off technology for microfluidic devices , 2005 .

[38]  S. Büttgenbach,et al.  SU8-micromechanical structures with in situ fabricated movable parts , 2002 .

[39]  Rean-Der Chien,et al.  Micromolding of biochip devices designed with microchannels , 2006 .

[40]  N. D. Rooij,et al.  High aspect ratio UV photolithography for electroplated structures , 1999 .

[41]  Steve Arscott,et al.  Integrated microfluidics based on multi-layered SU-8 for mass spectrometry analysis , 2004 .

[42]  Jun Zhang,et al.  Effect of exposure dose on the replication fidelity and profile of very high aspect ratio microchannels in SU-8. , 2004, Lab on a chip.

[43]  J. Fransaer,et al.  Electrodeposition and sliding wear resistance of nickel composite coatings containing micron and submicron SiC particles , 2001 .

[44]  Wei-Keng Lin,et al.  A novel fabrication method of embedded micro-channels by using SU-8 thick-film photoresists , 2003 .

[45]  G M Whitesides,et al.  Fabrication of topologically complex three-dimensional microfluidic systems in PDMS by rapid prototyping. , 2000, Analytical chemistry.

[46]  Jian Zhang,et al.  Polymerization optimization of SU-8 photoresist and its applications in microfluidic systems and MEMS , 2001 .

[47]  Volker Saile,et al.  Applications of LIGA technology to precision manufacturing of high-aspect-ratio micro-components and -systems: a review , 2004, Microelectron. J..

[48]  Joe Tien,et al.  Fabrication of aligned microstructures with a single elastomeric stamp , 2002, Proceedings of the National Academy of Sciences of the United States of America.

[49]  Chong H. Ahn,et al.  A tapered hollow metallic microneedle array using backside exposure of SU-8 , 2004 .