A coupled FEM/DEM model for pipe conveyor systems: Analysis of the contact forces on belt

Abstract The use of Pipe Belt Conveyor (PBC) has gained more and more popularity in bulk solids handling. Compared to the traditional trough conveyors, PBC can allow tighter curves and steeper gradients of conveyor routes and thus better suits the applications in difficult terrains. It has many unique mechanical characteristics which are not well understood yet. This paper proposes a coupled finite element model (FEM) and discrete element method (DEM) model to investigate the mechanics of a PBC system, with particular reference to the distribution of contact force in the pipe section. This FEM/DEM model considers comprehensively the formation of pipe from a flat belt and the microscopic structure of discrete particles under gravity, and thus can well describe the states of both conveyor belt and bulk solids. The predictions of the contact forces are shown to agree well with the previous experimental data under different conditions. Using this approach, the distribution of contact forces under different load conditions, i.e. zero gravity (ZG), empty pipe (VF 0%), volume fill of 40% (VF 40%) and 80% (VF 80%) are obtained and their dependencies on the rotation angle of pipe are investigated.

[1]  Hertz.  On the Contact of Elastic Solids , 1882 .

[2]  P. J. García Nieto,et al.  Non-linear analysis and warping of tubular pipe conveyors by the finite element method , 2007, Math. Comput. Model..

[3]  A. Yu,et al.  Discrete particle simulation of particulate systems: Theoretical developments , 2007 .

[4]  Craig Wheeler,et al.  Coupled DEM and FEM simulations for the analysis of conveyor belt deflection , 2012 .

[5]  Gabriel Fedorko,et al.  Simulation of Interaction of a Pipe Conveyor Belt with Moulding Rolls , 2012 .

[6]  Aibing Yu,et al.  Finite element analysis of the contact forces between a viscoelastic sphere and rigid plane , 2012 .

[7]  Gabriel Lodewijks,et al.  A stress discontinuity approach to model the stress profile on a loaded conveyor belt , 2015 .

[8]  Gabriel Fedorko,et al.  Statistical approach for evaluation of pipe conveyor’s belt contact forces on guide idlers , 2013 .

[9]  Pedro M. Reis,et al.  Localization of deformation in thin shells under indentation , 2013 .

[10]  W. T. Horssen,et al.  On the transversal vibrations of a conveyor belt with a low and time-varying velocity. Part II: the beam-like case , 2003 .

[11]  Craig Wheeler,et al.  Determination of the bulk flexure resistance via coupled fem-dem simulation , 2015 .

[12]  Raymond D. Mindlin,et al.  Compliance of elastic bodies in contact , 1949 .

[13]  Runyu Yang,et al.  Discrete particle simulation of particulate systems: A review of major applications and findings , 2008 .

[14]  Hak-Joo Lee,et al.  Some considerations on mechanical testing methods of rubbery materials using nonlinear finite element analysis , 2004 .

[15]  Craig Wheeler,et al.  Prediction of conveyor belt deflection by coupling of FEM and DEM simulations , 2010 .

[16]  A. J. Klein Breteler,et al.  Modelling rolling contact phenomena in a pouch belt conveyor system , 2006 .

[17]  Gabriel Lodewijks,et al.  Dynamics of Multiple Drive Belt Conveyor Systems , 2007 .

[18]  Aibing Yu,et al.  Finite element analysis of the rolling friction of a viscous particle on a rigid plane , 2011 .

[19]  Michal Weiszer,et al.  A regression model for prediction of pipe conveyor belt contact forces on idler rolls , 2013 .

[20]  P. Cundall,et al.  A discrete numerical model for granular assemblies , 1979 .

[21]  H. Hertz.  Ueber die Berührung fester elastischer Körper. , 1882 .

[22]  J. Zajac,et al.  Using of computer integrated system for static tests of pipe conveyer belts , 2012, Proceedings of the 13th International Carpathian Control Conference (ICCC).

[23]  A. Yu,et al.  Finite element investigation of the flow and stress patterns in conical hopper during discharge , 2015 .

[24]  A. H. Ansari.  Pipe conveyors advantages , 2005 .

[25]  Gabriel Lodewijks,et al.  Theoretical and experimental determination of the pressure distribution on a loaded conveyor belt , 2016 .

[26]  Thomas J. Rudolphi,et al.  Viscoelastic Indentation and Resistance to Motion of Conveyor Belts using a Generalized Maxwell Model of the Backing Material , 2006 .

[27]  C. Wheeler,et al.  Calculating the Flexure Resistance of Bulk Solids Transported on Belt Conveyors , 2004 .

[28]  Gabriel Fedorko,et al.  Analysis of asymmetrical effect of tension forces in conveyor belt on the idler roll contact forces in the idler housing , 2014 .

[29]  Qing-rui Meng,et al.  Dynamic characteristics of conveyor belts , 2008 .

[30]  Fan Wang.  Indentation Rolling Resistance of Conveyor Belts Based on Maxwell Model , 2012 .

[31]  Aibing Yu,et al.  Contact forces between viscoelastic ellipsoidal particles , 2013 .

[32]  Jin Y. Ooi,et al.  Linking of discrete element modelling with finite element analysis for analysing structures in contact with particulate solid , 2012 .

[33]  Nik Petrinic,et al.  A combined DEM-FEM numerical method for Shot Peening parameter optimisation , 2015, Adv. Eng. Softw..

[34]  Paul W. Cleary,et al.  An investigation of the comparative behaviour of alternative contact force models during elastic collisions , 2011 .

[35]  A. Yu,et al.  Modelling the granular flow in a rotating drum by the Eulerian finite element method , 2015 .

[36]  J. Golden,et al.  Hysteretic friction for the transient rolling contact problem of linear viscoelasticity , 2001 .

[37]  Gabriel Lodewijks,et al.  Measurement of a pipe belt conveyor contact forces and cross section deformation by means of the six-point pipe belt stiffness testing device , 2015 .