Digital fabrication of organic solar cells by Inkjet printing using non-halogenated solvents

Abstract Inkjet printing offers versatility and flexibility for the sequential deposition of functional layers for the production of large area organic photovoltaics (OPV). Four layers of an OPV cell are inkjet printed, comprising an ITO-free semi-transparent front electrode (a metal current collecting grid, inkjet printed PEDOT:PSS and ZnO nanoparticle layers), and the photo-active layer combined with PEDOT:PSS as hole transport layer. To render the process R2R compatible, large area printing is performed using a 3.5 cm wide printhead and non-halogenated ink formulations only. Similar performance is achieved for the inkjet printed cells as for cells with only spin coated layers and ITO. For the P3HT/PCBM bulk-heterojunction, a mixture of non-halogenated solvents ensured good solubility, proper printing behavior and a blend morphology that yields similar performance to a layer spin-coated from chlorinated solvents. The potential of inkjet printing for large area OPV was demonstrated by the fabrication of a module with 92 cm 2 active area, which showed an efficiency of 0.98%. Losses due to front and back electrode resistances are modeled and used to explain the recorded I-V curve. Combining these functional layers with inkjet printed electrodes lays out the roadmap toward fully roll-to-roll compatible digital fabrication of OPV.

[1]  Ulrich S Schubert,et al.  Inkjet printing as a deposition and patterning tool for polymers and inorganic particles. , 2008, Soft matter.

[2]  Christoph J. Brabec,et al.  Towards large-scale production of solution-processed organic tandem modules based on ternary composites: Design of the intermediate layer, device optimization and laser based module processing , 2014 .

[3]  Ronn Andriessen,et al.  Technology development for roll-to-roll production of organic photovoltaics , 2011 .

[4]  C. Waldauf,et al.  Inkjet-printed polymer-fullerene blends for organic electronic applications , 2012 .

[5]  Ronn Andriessen,et al.  Scaling Up ITO‐Free Solar Cells , 2014 .

[6]  W. Warta,et al.  Solar cell efficiency tables (version 36) , 2010 .

[7]  K. Tada.  Yet another poor man's green bulk heterojunction photocells: Annealing effect and film composition dependence of photovoltaic devices using poly(3-hexylthiophene):C70 composites prepared with chlorine-free solvent , 2013 .

[8]  Sung Cheol Yoon,et al.  High efficiency polymer solar cells via sequential inkjet-printing of PEDOT:PSS and P3HT:PCBM inks with additives , 2010 .

[9]  Alexander Lange,et al.  Modified processing conditions for optimized organic solar cells with inkjet printed P3HT:PC61BM active layers , 2013 .

[10]  Bryan D. Vogt,et al.  High performance bulk-heterojunction organic solar cells fabricated with non-halogenated solvent processing , 2011 .

[11]  Barry P Rand,et al.  Concurrently pumped ultrasonic spray coating for donor:acceptor and thickness optimization of organic solar cells , 2013 .

[12]  Alexander Lange,et al.  Inkjet printed solar cell active layers prepared from chlorine-free solvent systems , 2013 .

[13]  Frederik C. Krebs,et al.  Roll-to-roll fabrication of monolithic large-area polymer solar cells free from indium-tin-oxide , 2009 .

[14]  Claudia N. Hoth,et al.  High Photovoltaic Performance of Inkjet Printed Polymer:Fullerene Blends , 2007 .

[15]  Mikkel Jørgensen,et al.  Fast Inline Roll‐to‐Roll Printing for Indium‐Tin‐Oxide‐Free Polymer Solar Cells Using Automatic Registration , 2013 .

[16]  P. Yu,et al.  High-efficiency polymer solar cells by blade coating in chlorine-free solvents , 2014 .

[17]  Donal D. C. Bradley,et al.  Gravure printing inverted organic solar cells: The influence of ink properties on film quality and device performance , 2012 .

[18]  Ronn Andriessen,et al.  Current Collecting Grids for ITO-Free Solar Cells , 2012 .

[19]  F. Krebs.  Fabrication and processing of polymer solar cells: A review of printing and coating techniques , 2009 .

[20]  C. Brabec,et al.  Photovoltaic Loss Analysis of Inkjet-Printed Polymer Solar Cells Using Pristine Solvent Formulations , 2010 .

[21]  Xiaoniu Yang,et al.  Hybrid zinc oxide conjugated polymer bulk heterojunction solar cells. , 2005, The journal of physical chemistry. B.

[22]  Miao Xu,et al.  Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure , 2012, Nature Photonics.

[23]  H. J. van de Wiel,et al.  Roll-to-roll embedded conductive structures integrated into organic photovoltaic devices , 2013, Nanotechnology.

[24]  Mikkel Jørgensen,et al.  Silver front electrode grids for ITO-free all printed polymer solar cells with embedded and raised topographies, prepared by thermal imprint, flexographic and inkjet roll-to-roll processes. , 2012, Nanoscale.

[25]  S. Haque,et al.  Morphological and spectroscopic characterizations of inkjet-printed poly(3-hexylthiophene-2,5-diyl): Phenyl-C61-butyric acid methyl ester blends for organic solar cell applications , 2014 .

[26]  Fei Huang,et al.  Non-halogenated solvents for environmentally friendly processing of high-performance bulk-heterojunction polymer solar cells , 2013 .

[27]  Steven Abbott,et al.  Determination of Solubility Parameters for Organic Semiconductor Formulations , 2011 .

[28]  Ronn Andriessen,et al.  Evaluation of ink-jet printed current collecting grids and busbars for ITO-free organic solar cells , 2012 .

[29]  Christoph J. Brabec,et al.  Performance Analysis of Printed Bulk Heterojunction Solar Cells , 2006 .

[30]  Mm Martijn Wienk,et al.  Narrow‐Bandgap Diketo‐Pyrrolo‐Pyrrole Polymer Solar Cells: The Effect of Processing on the Performance , 2008 .

[31]  S. Beaupré,et al.  Highly efficient thieno[3,4-c]pyrrole-4,6-dione-based solar cells processed from non-chlorinated solvent , 2014 .

[32]  Y. Galagan,et al.  Investigation of non-halogenated solvent mixtures for high throughput fabrication of polymer-fullerene solar cells , 2012 .

[33]  Ronn Andriessen,et al.  Inkjet Printing of Back Electrodes for Inverted Polymer Solar Cells , 2013 .

[34]  T. Eggenhuisen,et al.  Inkjet printing technology for OPV applications , 2012 .

[35]  Jan Genoe,et al.  Polymer based organic solar cells using ink-jet printed active layers , 2008 .

[36]  S. Chua,et al.  A transition solvent strategy to print polymer:fullerene films using halogen-free solvents for solar cell applications , 2014 .

[37]  Yang Yang,et al.  Elucidating Double Aggregation Mechanisms in the Morphology Optimization of Diketopyrrolopyrrole‐Based Narrow Bandgap Polymer Solar Cells , 2014, Advanced materials.

[38]  Sandra Kouijzer,et al.  Predicting morphologies of solution processed polymer:fullerene blends. , 2013, Journal of the American Chemical Society.

[39]  W. Warta,et al.  Solar cell efficiency tables (Version 45) , 2015 .

[40]  Claudia N. Hoth,et al.  Printing highly efficient organic solar cells. , 2008, Nano letters.

[41]  F. Krebs,et al.  A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies , 2009 .