Osmotic power potential in remote regions of Quebec

Diesel-generated electricity is currently used to supply electricity to community micro-grids in remote regions of Quebec. Given its high cost and environmental impact there is interest in developing renewable energy alternatives for such applications. The potential of pressure retarded osmotic (PRO) power to supply remote community loads is investigated here. A mathematical model for PRO power systems is described and the effects of concentration polarization, spatial variation, pressure losses and system inefficiencies are reviewed. The model is used to simulate the PRO power potential of 10 selected rivers given there variations in temperature, concentration and flow rate throughout the year. Power potential is compared to electricity loads of nearby communities. In each case, only a small percentage of the river's lowest monthly flow rate would be required to satisfy the peak power demand of the micro-grids. This suggests that osmotic power could serve as a reliable source of electricity in such applications.

[1]  P. Stenzel,et al.  Site-specific potential analysis for pressure retarded osmosis (PRO) power plants – The León River example , 2014 .

[2]  Charles James Lemckert,et al.  Osmotic power with Pressure Retarded Osmosis: Theory, performance and trends – A review , 2014 .

[3]  Dc Kitty Nijmeijer,et al.  Experimentally obtainable energy from mixing river water, seawater or brines with reverse electrodialysis , 2014 .

[4]  Sidney Loeb,et al.  Production of energy from concentrated brines by pressure-retarded osmosis , 1976 .

[5]  R. Kleiterp,et al.  The feasibility of a commercial osmotic power plant , 2012 .

[6]  M. Elimelech,et al.  Membrane-based processes for sustainable power generation using water , 2012, Nature.

[7]  R. Baker,et al.  Membranes for power generation by pressure-retarded osmosis , 1981 .

[8]  T. Holt,et al.  The potential for power production from salinity gradients by pressure retarded osmosis , 2009 .

[9]  Joon Ha Kim,et al.  Reverse osmosis (RO) and pressure retarded osmosis (PRO) hybrid processes: Model-based scenario study , 2013 .

[10]  Oliver Paish,et al.  Small hydro power: technology and current status , 2002 .

[11]  S. Loeb,et al.  Internal polarization in the porous substructure of a semipermeable membrane under pressure-retarded osmosis , 1978 .

[12]  Menachem Elimelech,et al.  Modeling water flux in forward osmosis: Implications for improved membrane design , 2007 .

[13]  Menachem Elimelech,et al.  Influence of Crossflow Membrane Filter Geometry and Shear Rate on Colloidal Fouling in Reverse Osmosis and Nanofiltration Separations , 2002 .

[14]  P. Pillay,et al.  Generator selection for rural electrification from renewable energy , 2011, 2011 IEEE International Electric Machines & Drives Conference (IEMDC).

[15]  Pragasen Pillay,et al.  Pressure-retarded osmotic power system model considering non-ideal effects , 2015 .

[16]  Ngai Yin Yip,et al.  Thermodynamic and energy efficiency analysis of power generation from natural salinity gradients by pressure retarded osmosis. , 2012, Environmental science & technology.

[17]  Andrea Achilli,et al.  Pressure retarded osmosis: From the vision of Sidney Loeb to the first prototype installation — Review , 2010 .

[18]  Chuyang Y. Tang,et al.  Effect of draw solution concentration and operating conditions on forward osmosis and pressure retarded osmosis performance in a spiral wound module , 2010 .

[19]  Pragasen Pillay,et al.  Modeling pressure-retarded osmotic power in commercial length membranes , 2015 .

[20]  Young Kim,et al.  Experimental investigation of a spiral-wound pressure-retarded osmosis membrane module for osmotic power generation. , 2013, Environmental science & technology.

[21]  S. Loeb.  Large-scale power production by pressure-retarded osmosis, using river water and sea water passing through spiral modules , 2002 .

[22]  G. Schock,et al.  Mass transfer and pressure loss in spiral wound modules , 1987 .