Synthesis of mullite–MoSi2 nano-composite through a mechanochemical processing

[1]  M. Haddad-Sabzevar,et al.  Synthesis of nano-structure molybdenum disilicide from primary mixture of MoO3 + Si + Al through mechanochemical reactions , 2013 .

[2]  B. Kieback,et al.  Solid-state reactions during high-energy milling of mixed powders , 2013 .

[3]  Malek Ali,et al.  Modification of parameters in mechanochemical synthesis to obtain - and -molybdenum disilicide , 2013 .

[4]  A. K. Suri,et al.  Thermal analysis on conversion of MoO3 to MoO2 and its silicothermic reduction , 2013, Journal of Thermal Analysis and Calorimetry.

[5]  Jianguang Xu,et al.  In situ pressureless sintering of SiC/MoSi2 composites , 2012 .

[6]  Y. Ahmed,et al.  Synthesis of molybdenum silicide/mullite composites for high-temperature applications , 2011 .

[7]  A. K. Suri,et al.  Studies on Synthesis and Characterization of Mo Based In Situ Composite by Silicothermy Co-reduction Process , 2011 .

[8]  Liping Huang,et al.  Oxidation behavior of Al2O3 reinforced MoSi2 composite coatings fabricated by vacuum plasma spraying , 2010 .

[9]  K. Hellström,et al.  Oxidation behavior of a Mo (Si, Al)2-based composite at 300–1000 °C , 2010 .

[10]  G. Thomas,et al.  Mullite Whisker ‐ Molybdenum Disilicide Composites , 2008 .

[11]  H. Schneider,et al.  Water vapor corrosion of mullite : Single crystals versus polycrystalline ceramics , 2008 .

[12]  H. Schneider,et al.  Structure and properties of mullite—A review , 2008 .

[13]  M. Enayati,et al.  Mechanochemical reduction of MoO3/SiO2 powder mixtures by Al and carbon for the synthesis of nanocrystalline MoSi2 , 2007 .

[14]  H. Schneider,et al.  Temperature-dependent evolution of grain growth in mullite fibres , 2005 .

[15]  B. S. Murty,et al.  Effect of mechanical activation on synthesis of ultrafine Si3N4–MoSi2 in situ composites , 2004 .

[16]  D. Sciti,et al.  Influence of long term oxidation on the microstructure, mechanical and electrical properties of pressureless sintered AlN–SiC–MoSi2 ceramic composites , 2003 .

[17]  D. Sciti,et al.  Surface modification and oxidation kinetics of hot-pressed AlN–SiC–MoSi2 electroconductive ceramic composite , 2003 .

[18]  Jinsheng Pan,et al.  Fabrication and characterization of TiC-particle-reinforced MoSi2 composites , 2002 .

[19]  T. Chartier,et al.  MoSi2/Al2O3 FGM: elaboration by tape casting and SHS , 2001 .

[20]  H. Juárez,et al.  Homogeneous precipitation and thermal phase transformation of mullite ceramic precursor , 2001 .

[21]  A. Kelly,et al.  Effect of Oxygen Vacancies on the Hot Hardness of Mullite , 2001 .

[22]  Nagaiyar Krishnamurthy,et al.  The reduction of niobium and tantalum pentoxides by silicon in vacuum , 2001 .

[23]  J. Amigó,et al.  XRD microstructural analysis of mullites obtained from kaolinite–alumina mixtures , 2000 .

[24]  G. Fantozzi,et al.  Suitability of Mullite for High Temperature Applications , 1999 .

[25]  K. Niihara,et al.  Strong monolithic and composite MoSi2 materials by nanostructure design , 1999 .

[26]  R. Mitra,et al.  Effect of small aluminum additions on microstructure and mechanical properties of molybdenum di-silicide , 1999 .

[27]  R. Mitra,et al.  Effect of minor alloying with Al on oxidation behaviour of MoSi2 at 1200°C , 1999 .

[28]  C. Koch.  Intermetallic matrix composites prepared by mechanical alloying—a review , 1998 .

[29]  J. Petrovic.  Mechanical behavior of MoSi2 and MoSi2 composites , 1995 .

[30]  K. Nagata,et al.  High temperature oxidation of MoSiX intermetallics (X = Al, Ti, Ta, Zr and Y) , 1995 .

[31]  H. Schneider,et al.  Mullite formation by reaction sintering of quartz and α-Al2O3—A TEM study , 1994 .

[32]  E. Lee,et al.  Oxidation of MoSi2-based composites , 1992 .

[33]  E. Courtright,et al.  Engineering limitations of MoSi2 coatings , 1992 .

[34]  M. Kaufman,et al.  In-situ reinforced MoSi2 composites by mechanical alloying , 1992 .

[35]  M. Kaufman,et al.  Intrinisic second-phase particles in powder-processed MoSi2 , 1991 .

[36]  P. Kisly,et al.  The mullite coatings on heaters made of molybdenum disilicide , 1989 .

[37]  F. Chung.  Quantitative interpretation of X-ray diffraction patterns of mixtures. II. Adiabatic principle of X-ray diffraction analysis of mixtures , 1974 .