Nanoscale particles for polymer degradation and stabilization—Trends and future perspectives
暂无分享,去创建一个
N. S. Tomer | R. Singh | Annamalai Pratheep Kumar | Dilip Depan | Raj Pal Singh | Namrata Singh Tomer | D. Depan | N. Tomer
[1] S. Eichhorn,et al. Elastic modulus and stress-transfer properties of tunicate cellulose whiskers. , 2005, Biomacromolecules.
[2] Li-Hui Wang,et al. A Kinetic Study on the Thermal Degradation of Polypropylene/Attapulgite Nanocomposites , 2006 .
[3] Alain Dufresne,et al. Chitin whisker reinforced thermoplastic nanocomposites , 2001 .
[4] A. Dufresne,et al. Platelet nanocrystals resulting from the disruption of waxy maize starch granules by acid hydrolysis. , 2003, Biomacromolecules.
[5] Takashi Tsujimoto,et al. Green Nanocomposites from Renewable Resources: Plant Oil−Clay Hybrid Materials , 2003 .
[6] J. Verdu,et al. Polymer degradation during processing , 2006 .
[7] Z. Zhang,et al. Crystal growth. , 1999, Proceedings of the National Academy of Sciences of the United States of America.
[8] R. K. Shah,et al. Organoclay degradation in melt processed polyethylene nanocomposites , 2006 .
[9] J. S. Shelley,et al. Reinforcement and environmental degradation of nylon-6/clay nanocomposites , 2001 .
[10] J. Gardette,et al. Photo-oxidation of Polypropylene/Montmorillonite Nanocomposites. 1. Influence of Nanoclay and Compatibilizing Agent , 2004 .
[11] A. Dufresne,et al. Improvement of Starch Film Performances Using Cellulose Microfibrils , 1998 .
[12] B. Schartel,et al. Phosphonium‐modified layered silicate epoxy resins nanocomposites and their combinations with ATH and organo‐phosphorus fire retardants , 2006 .
[13] G. Zaikov,et al. Heterogeneous features of autooxidation of hydrocarbon polymers , 2001 .
[14] Alain Dufresne,et al. Mechanical behavior of sheets prepared from sugar beet cellulose microfibrils , 1997 .
[15] P. Ding,et al. Synthesis and characterization of exfoliated polystyrene/ZnAl layered double hydroxide nanocomposite via emulsion polymerization. , 2005, Journal of colloid and interface science.
[16] V. B. Berezhanskii,et al. Electrical ageing of polymeric dielectrics under conditions of suppression of partial discharges , 1986 .
[17] C. A. Wilkie,et al. Polystyrene nanocomposites based on quinolinium and pyridinium surfactants , 2006 .
[18] C. A. Wilkie,et al. Nanocomposites based on poly (ϵ-caprolactone) (PCL)/clay hybrid: polystyrene, high impact polystyrene, ABS, polypropylene and polyethylene , 2003 .
[19] Won‐Ki Lee,et al. Environmentally friendly polymer hybrids Part I Mechanical, thermal, and barrier properties of thermoplastic starch/clay nanocomposites , 2003 .
[20] A. J. Michell,et al. Future prospects for wood cellulose as reinforcement in organic polymer composites , 1989 .
[21] Lynn A. Capadona,et al. A versatile approach for the processing of polymer nanocomposites with self-assembled nanofibre templates. , 2007, Nature nanotechnology.
[22] S. Hsu,et al. Enhanced Thermal and Mechanical Properties in Polyurethane/Au Nanocomposites , 2004 .
[23] Rupali Gangopadhyay and,et al. Conducting Polymer Nanocomposites: A Brief Overview , 2000 .
[24] R. Tenne,et al. Polymer-assisted fabrication of nanoparticles and nanocomposites , 2008 .
[25] Sunil P. Lonkar,et al. Photo-stabilization of EPDM–clay nanocomposites: effect of antioxidant on the preparation and durability† , 2007 .
[26] Yunfa Chen,et al. Photo-crosslinking polymerization to prepare polyanhydride/needle-like hydroxyapatite biodegradable nanocomposite for orthopedic application , 2003 .
[27] Jae-Do Nam,et al. Electrospun dual-porosity structure and biodegradation morphology of Montmorillonite reinforced PLLA nanocomposite scaffolds. , 2005, Biomaterials.
[28] D. Thorn,et al. Nanoparticles: Uses and Relationships to Molecular Cluster Compounds , 1998 .
[29] Pulickel M. Ajayan,et al. Application of Carbon Nanotubes as Supports in Heterogeneous Catalysis , 1994 .
[30] M. Osman,et al. Structure and Properties of Alkylammonium Monolayers Self-Assembled on Montmorillonite Platelets , 2004 .
[31] M. Misra,et al. Novel biobased nanocomposites from functionalized vegetable oil and organically-modified layered silicate clay , 2005 .
[32] C. A. Wilkie,et al. An XPS study of the thermal degradation and flame retardant mechanism of polystyrene-clay nanocomposites , 2002 .
[33] Z. Osawa. Role of metals and metal-deactivators in polymer degradation , 1988 .
[34] Mingcai Chen,et al. Siloxane-modified poly(acrylic acid) synthesized in supercritical CO2 , 2003 .
[35] P. Ajayan,et al. Nanocomposite Science And Technology , 2003 .
[36] P. Liu,et al. Preparation of PANI–TiO2 nanocomposites and their solid-phase photocatalytic degradation , 2006 .
[37] Yi-bing Cheng,et al. Melt Intercalation of PMMA into Organically-Modified Layered Silicate , 1999 .
[38] P. Degée,et al. Polylactide/montmorillonite nanocomposites: study of the hydrolytic degradation , 2005 .
[39] Richard H. Harris,et al. Nanoparticle networks reduce the flammability of polymer nanocomposites , 2005, Nature materials.
[40] Taeghwan Hyeon,et al. Chemical synthesis of magnetic nanoparticles. , 2003, Chemical communications.
[41] C. A. Wilkie,et al. The Relationship Between Thermal Degradation Behavior of Polymer and the Fire Retardancy of Polymer/Clay Nanocomposites , 2005 .
[42] P. Dutta,et al. Handbook of Layered Materials , 2004 .
[43] H. Fink,et al. Relation between structure and elastic constants of man-made cellulosic fibers. I: A two phase anisotropic model with contiguity parameter , 1994 .
[44] C. Rao,et al. Carbon-assisted synthesis of inorganic nanowires , 2004 .
[45] J. Gérard,et al. PHOTODEGRADATION OF POLYPROPYLENE NANOCOMPOSITES , 2003 .
[46] Zhifeng Ren,et al. Growth of a Single Freestanding Multiwall Carbon Nanotube on each Nanonickel Dot , 1999 .
[47] Takashi Kashiwagi,et al. NANOCOMPOSITES : A REVOLUTIONARY NEW FLAME RETARDANT APPROACH , 1997 .
[48] R. Ruoff,et al. Chemical Vapor Deposition Based Synthesis of Carbon Nanotubes and Nanofibers Using a Template Method , 1998 .
[49] Shao-jie Wang,et al. Microstructure and thermal properties of ethylene-(vinyl acetate) copolymer/rectorite nanocomposites , 2006 .
[50] Hua Dong,et al. New nanocomposite materials reinforced with flax cellulose nanocrystals in waterborne polyurethane. , 2007, Biomacromolecules.
[51] T. K. Chaki,et al. Thermogravimetric studies on Polyamide-6,6 modified by electron beam irradiation and by nanofillers , 2006 .
[52] R. Singh,et al. An overview on the degradability of polymer nanocomposites , 2005 .
[53] Andi Li,et al. Preparation, swelling behaviors and application of polyacrylamide/attapulgite superabsorbent composites , 2006 .
[54] K. Miyasaka,et al. Tensile yield stress of polypropylene composites filled with ultrafine particles , 1983 .
[55] M. Misra,et al. "Green" nanocomposites from cellulose acetate bioplastic and clay: effect of eco-friendly triethyl citrate plasticizer. , 2004, Biomacromolecules.
[56] M. Dewar,et al. Photosensitization by Vat Dyes , 1949, Nature.
[57] N. Ballav. Molybdenum blues based conducting nanocomposites of polypyrrole, polyN-vinylcarbazole and of their binary combination , 2005 .
[58] S. Ray,et al. Structure-Property Relationship in Biodegradable Poly(butylene succinate)/Layered Silicate Nanocomposites , 2003 .
[59] P. C. Rieke,et al. Self-assembly in the synthesis of ceramic materials and composites , 1996 .
[60] K. Wei,et al. Thermal transitions of montmorillonite/polyurethane nanocomposites , 2000 .
[61] Yu-Zhong Wang,et al. Flammability and thermal degradation behaviors of phosphorus‐containing copolyester/BaSO4 nanocomposites , 2006 .
[62] J. Youn,et al. Degradation and rheological properties of biodegradable nanocomposites prepared by melt intercalation method , 2005 .
[63] T. Chou,et al. Advances in the science and technology of carbon nanotubes and their composites: a review , 2001 .
[64] R. Bharadwaj,et al. Structure–property relationships in cross-linked polyester–clay nanocomposites , 2002 .
[65] C. Zhi,et al. Boron nitride nanotubes: nanoparticles functionalization and junction fabrication. , 2007, Journal of nanoscience and nanotechnology.
[66] A. Błędzki,et al. Composites reinforced with cellulose based fibres , 1999 .
[67] M. McBride. Chemistry of Clays and Clay Minerals , 1988 .
[68] Chaobin He,et al. Hydrothermal effects on the thermomechanical properties of high performance epoxy/clay nanocomposites , 2006 .
[69] Weibing Hu,et al. Study on in situ synthesis of konjac glucomannan/silver nanocomposites via photochemical reduction , 2006 .
[70] Krzysztof Pielichowski,et al. Polymer/montmorillonite nanocomposites with improved thermal properties Part I. Factors influencing thermal stability and mechanisms of thermal stability improvement , 2007 .
[71] G. Scott. Degradation and stabilization of polymers , 1969 .
[72] J. Lee,et al. Pentachlorophenol Sorption by Organo-Clays , 1988 .
[73] Richard P. Wool,et al. Nanoclay reinforced bio-based elastomers: Synthesis and characterization , 2006 .
[74] F. Morehead,et al. Level-Off Degree of Polymerization , 1956 .
[75] Hsu-Chiang Kuan,et al. Thermo-oxidative degradation of novel epoxy containing silicon and phosphorous nanocomposites , 2003 .
[76] Charles A. Wilkie,et al. The thermal degradation of poly(methyl methacrylate) nanocomposites with montmorillonite, layered double hydroxides and carbon nanotubes , 2006 .
[77] Enrico Boccaleri,et al. Synthetic, layered nanoparticles for polymeric nanocomposites (PNCs) , 2007 .
[78] Young Hee Lee,et al. Crystalline Ropes of Metallic Carbon Nanotubes , 1996, Science.
[79] A. Dufresne,et al. Morphological investigation of nanocomposites from sorbitol plasticized starch and tunicin whiskers. , 2002, Biomacromolecules.
[80] George M Whitesides,et al. Nanoscience, nanotechnology, and chemistry. , 2005, Small.
[81] Xiaogang Peng,et al. Kinetics of II-VI and III-V Colloidal Semiconductor Nanocrystal Growth: “Focusing” of Size Distributions , 1998 .
[82] C. Kröhnke,et al. Polymer stabilization : present status and possible future trends , 2006 .
[83] Christopher B. Murray,et al. Synthesis and Characterization of Monodisperse Nanocrystals and Close-Packed Nanocrystal Assemblies , 2000 .
[84] Hartmut Presting,et al. Future nanotechnology developments for automotive applications , 2003 .
[85] T. Kashiwagi,et al. Fire Retardancy and Thermal Stability of Materials Coated by Organosilicon Thin Films Using a Cold Remote Plasma Process , 2001 .
[86] Yi Liu,et al. Handbook of nanophase and nanostructured materials , 2003 .
[87] Z. Wang,et al. Forced Hydrolysis and Chemical Co-Precipitation , 2003 .
[88] N. Grassie. Developments in Polymer Degradation—6 , 1985 .
[89] W. Fan,et al. Influence of Fe‐MMT on crosslinking and thermal degradation in silicone rubber/clay nanocomposites , 2006 .
[90] David P. Ziegler,et al. Influence of montmorillonite layered silicate on plasticized poly(l-lactide) blown films , 2005 .
[91] E. Espuche,et al. Hybrid films of polyimide containing in situ generated silver or palladium nanoparticles: Effect of the particle precursor and of the processing conditions on the morphology and the gas permeability , 2006 .
[92] P. Lutgen,et al. Ageing and degradation of poly(ethylene terephthalate) in an oxygen plasma , 1991 .
[93] R. Singh,et al. Preparation and characterization of novel hybrid of chitosan-g-lactic acid and montmorillonite. , 2006, Journal of biomedical materials research. Part A.
[94] E. Ōsawa. Perspectives of Fullerene Nanotechnology , 2002 .
[95] Alain Dufresne,et al. Thermoplastic nanocomposites filled with wheat straw cellulose whiskers. Part I: Processing and mechanical behavior , 1996 .
[96] M. Misra,et al. Effect of Compatibilizer on Nanostructure of the Biodegradable Cellulose Acetate/Organoclay Nanocomposites , 2004 .
[97] Kwang Soo Cho,et al. Retarded Cross-linking in ZnO-low-density Polyethylene Nanocomposites , 2002 .
[98] M. Markham,et al. Oxidation of Alcohols Catalyzed by Zinc Oxide and Light , 1958 .
[99] Izumi Ichinose,et al. Nanocoating of natural cellulose fibers with conjugated polymer: hierarchical polypyrrole composite materials. , 2005, Chemical communications.
[100] S. Ray,et al. New Polylactide/Layered Silicate Nanocomposites. 1. Preparation, Characterization, and Properties , 2002 .
[101] S. Vyazovkin,et al. Mechanistic Differences in Degradation of Polystyrene and Polystyrene‐Clay Nanocomposite: Thermal and Thermo‐Oxidative Degradation , 2006 .
[102] A. Bledzki,et al. Einfluß von haftvermittlern auf das feuchteverhalten naturfaserverstärkter kunststoffe , 1996 .
[103] Tianxi Liu,et al. Thermal degradation behavior of polyamide 6/clay nanocomposites , 2003 .
[104] E. Giménez,et al. Optimization of Biodegradable Nanocomposites Based on aPLA/PCL Blends for Food Packaging Applications , 2006 .
[105] R. Mülhaupt,et al. Combustion behaviour of EVA/Fluorohectorite nanocomposites , 2001 .
[106] Manjusri Misra,et al. Recent advances in biodegradable nanocomposites. , 2005, Journal of nanoscience and nanotechnology.
[107] S. Iijima. Helical microtubules of graphitic carbon , 1991, Nature.
[108] S. Eichhorn,et al. Determination of the stiffness of cellulose nanowhiskers and the fiber-matrix interface in a nanocomposite using Raman spectroscopy , 2008 .
[109] P. Dubois,et al. Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials , 2000 .
[110] Suprakas Sinha Ray,et al. POLYMER/LAYERED SILICATE NANOCOMPOSITES: A REVIEW FROM PREPARATION TO PROCESSING , 2003 .
[111] Ichiro Sakurada,et al. Experimental determination of the elastic modulus of crystalline regions in oriented polymers , 1962 .
[112] Dan Gilead,et al. Degradable polymers : principles and applications , 1995 .
[113] G. Gong,et al. Effects of Surface Treatment of Co3O4 Particles on the Properties of Polymethylphenylsiloxane Based Nanocomposites , 2004 .
[114] Véronique Favier,et al. Polymer Nanocomposites Reinforced by Cellulose Whiskers , 1995 .
[115] B. Rao,et al. Stabilization of γ-sterilized biomedical polyolefins by synergistic mixtures of oligomeric stabilizers , 2006 .
[116] P. Cheremisinoff,et al. Handbook of Engineering Polymeric Materials , 1997 .
[117] T. Kashiwagi,et al. A study of the flammability reduction mechanism of polystyrene‐layered silicate nanocomposite: layered silicate reinforced carbonaceous char , 2006 .
[118] Marianne Odlyha,et al. The degradative resistance of polyhedral oligomeric silsesquioxane nanocore integrated polyurethanes: an in vitro study. , 2006, Biomaterials.
[119] S. Ray,et al. Novel Porous Ceramic Material via Burning of Polylactide/Layered Silicate Nanocomposite , 2002 .
[120] C. A. Wilkie,et al. Thermal Degradation and Combustibility of Polypropylene Filled with Magnesium Hydroxide Micro-Filler and Polypropylene Nano-Filled Aluminosilicate Composite , 2005 .
[121] D. R. Paul,et al. Nylon 6 nanocomposites by melt compounding , 2001 .
[122] E. Leroy,et al. Use of oxide nanoparticles and organoclays to improve thermal stability and fire retardancy of poly(methyl methacrylate) , 2005 .
[123] M. El-Sayed,et al. Chemistry and properties of nanocrystals of different shapes. , 2005, Chemical reviews.
[124] R. Whatmore. Nanotechnology--what is it? Should we be worried? , 2006 .
[125] B. Qu,et al. Structural characterization and thermal oxidation properties of LLDPE/MgAl-LDH nanocomposites , 2006 .
[126] P. Messersmith,et al. Synthesis and Characterization of Layered Silicate-Epoxy Nanocomposites , 1994 .
[127] N. Uri. Metal Ion Catalysis and Polarity of Environment in the Aerobic Oxidation of Unsaturated Fatty Acids , 1956, Nature.
[128] B. Kandola,et al. Flame‐retardant unsaturated polyester resin incorporating nanoclays , 2006 .
[129] Jun Chen,et al. Storage of hydrogen and lithium in inorganic nanotubes and nanowires , 2006 .
[130] Peter Beighton,et al. de la Chapelle, A. , 1997 .
[131] P. Sun,et al. Study on Phenolic Resins Modified by Copper Nanoparticles , 2006 .
[132] Lixin Wu,et al. Polypropylene/Montmorillonite Nanocomposites. Review of the Synthetic Routes and Materials Properties , 2001 .
[133] William J. Brittain,et al. Synthesis and Characterization of PMMA Nanocomposites by Suspension and Emulsion Polymerization , 2001 .
[134] G. Camino,et al. Poly‐1‐butene/clay nanocomposite effect of compatibilizers on thermal and fire retardant properties , 2006 .
[135] Yong Zhang,et al. Effect of different clay treatment on morphology and mechanical properties of PVC-clay nanocomposites , 2003 .
[136] Shiro Kobayashi,et al. Green Nanocomposites from Renewable Resources: Biodegradable Plant Oil-Silica Hybrid Coatings , 2003 .
[137] C. Bawn,et al. The metal salts-catalysed autoxidation of atactic polypropylene in solution I—Manganese salts-catalysed autoxidation , 1968 .
[138] Wei Xie,et al. Thermal Degradation Chemistry of Alkyl Quaternary Ammonium Montmorillonite , 2001 .
[139] M. Siegal,et al. Synthesis of large arrays of well-aligned carbon nanotubes on glass , 1998, Science.
[140] S. C. Mojumdar,et al. Preparation and properties of calcium silicate hydrate-poly(vinyl alcohol) nanocomposite materials , 2005 .
[141] A. Dufresne,et al. New Nanocomposite Materials: Microcrystalline Starch Reinforced Thermoplastic , 1996 .
[142] J. Simon,et al. Thermoplastic and biodegradable polymers of cellulose , 1998 .
[143] D. R. Paul,et al. Polycarbonate nanocomposites: Part 2. Degradation and color formation , 2003 .
[144] F. Tüdös,et al. Initiated oxidation and auto-oxidation of polyethylene in trichlorobenzene solution , 1979 .
[145] B. Rao,et al. Stabilization of γ-sterilized biomedical polyolefins by synergistic mixtures of oligomeric stabilizers. Part II. Polypropylene matrix , 2007 .
[146] C. A. Wilkie,et al. Mechanical and Fire Properties of Styrenic Polymer Nanocomposites Based on an Oligomerically – Modified Clay , 2005 .
[147] G. Scott,et al. Atmospheric Oxidation and Antioxidants , 1965 .
[148] L. E. Wise,et al. A CHLORITE HOLOCELLULOSE, ITS FRACTIONATION AND BEARING ON SUMMATIVE WOOD ANALYSIS AND STUDIES ON THE HEMICELLULOSES , 1946 .
[149] R. Shen,et al. Synthesis, characterization and properties of organoclay‐modified polyurethane/epoxy interpenetrating polymer network nanocomposites , 2006 .
[150] R. Singh,et al. Progress in the Area of Degradation and Stabilization of Nylon 66 , 1998 .
[151] Toshio Kurauchi,et al. Mechanical properties of nylon 6-clay hybrid , 1993 .
[152] B. Tang,et al. Preparation, Alignment, and Optical Properties of Soluble Poly(phenylacetylene)-Wrapped Carbon Nanotubes† , 1999 .
[153] M. Zhang,et al. Roles of anatase and rutile TiO2 nanoparticles in photooxidation of polyurethane , 2007 .
[154] A. Dufresne,et al. Processing and Structural Properties of Waxy Maize Starch Nanocrystals Reinforced Natural Rubber , 2005 .
[155] P. Khanna,et al. Synthesis and characterization of Ag/PVA nanocomposite by chemical reduction method , 2005 .
[156] Anthony Davis,et al. Weathering of polymers , 1983 .
[157] Sunil P. Lonkar,et al. Synthesis, characterization, and performance evaluation of novel stabilized TDI‐based polyurethane coatings under accelerated weathering , 2005 .
[158] A. Gu,et al. Thermal degradation behavior of multi-walled carbon nanotubes/polyamide 6 composites , 2006 .
[159] A. Dufresne,et al. Crab shell chitin whisker reinforced natural rubber nanocomposites. 1. Processing and swelling behavior. , 2003, Biomacromolecules.
[160] P. Supaphol,et al. Preparation and characterization of α-chitin whisker-reinforced poly(vinyl alcohol) nanocomposite films with or without heat treatment , 2005 .
[161] R. Li,et al. A study on the photo-degradation of zinc oxide (ZnO) filled polypropylene nanocomposites , 2006 .
[162] D. Picq,et al. Polyimides and Other High‐Temperature Polymers , 2003 .
[163] G. Brown,et al. The chemical constitution of clays. , 1987 .
[164] Kenneth A. Smith,et al. Gas-phase catalytic growth of single-walled carbon nanotubes from carbon monoxide , 1999 .
[165] E. Kandare,et al. Thermal stability and degradation kinetics of poly(methyl methacrylate)/layered copper hydroxy methacrylate composites , 2006 .
[166] B. French,et al. Palladium−Polyimide Nanocomposite Membranes: Synthesis and Characterization of Reflective and Electrically Conductive Surface-Metallized Films , 2005 .
[167] R. Advíncula,et al. Degradation and Relaxation Kinetics of Polystyrene−Clay Nanocomposite Prepared by Surface Initiated Polymerization , 2004 .
[168] Mingshu Yang,et al. Photo-oxidative degradation of polypropylene/montmorillonite nanocomposites , 2005 .
[169] Paul A. Rundquist,et al. Advances in cellulose ester performance and application , 2001 .
[170] J. Gardette,et al. Photooxidation of Polypropylene/Montmorillonite Nanocomposites. 2. Interactions with Antioxidants , 2005 .
[171] Yongfa Zhu,et al. Solid-phase photocatalytic degradation of polystyrene plastic with TiO2 as photocatalyst , 2003 .
[172] A. Dufresne,et al. Transcrystallization in Mcl-PHAs/Cellulose Whiskers Composites , 1999 .
[173] A. Morin,et al. Nanocomposites of Chitin Whiskers from Riftia Tubes and Poly(caprolactone) , 2002 .
[174] John C. Crawford. 2(2-hydroxyphenyl)2H-benzotriazole ultraviolet stabilizers , 1999 .
[175] U. Leonhardt,et al. Fiber-Optical Analog of the Event Horizon , 2007, Science.
[176] H. Althues,et al. Functional inorganic nanofillers for transparent polymers. , 2007, Chemical Society reviews.
[177] M. Zanetti,et al. Thermal degradation and rheological behaviour of EVA/montmorillonite nanocomposites , 2002 .
[178] Thomas J. Pinnavaia,et al. Polymer-clay nanocomposites , 2000 .
[179] Tibor Braun,et al. Nanoscience and nanotecnology on the balance , 1997, Scientometrics.
[180] D. Tyler,et al. Stimuli-Responsive Polymer Nanocomposites Inspired by the Sea Cucumber Dermis , 2008, Science.
[181] M. Lewin,et al. Thermal decomposition of aliphatic nylons , 1999 .
[182] A. Steinbüchel,et al. Biochemical and molecular basis of microbial synthesis of polyhydroxyalkanoates in microorganisms. , 2001, Advances in biochemical engineering/biotechnology.
[183] S. Ray,et al. New Polylactide/Layered Silicate Nanocomposite: Nanoscale Control Over Multiple Properties , 2002 .
[184] J. Pospíšil,et al. Oxidation inhibition in organic materials , 1990 .
[185] A. S. Herrmann,et al. Construction materials based upon biologically renewable resources—from components to finished parts , 1998 .
[186] R. Superfine,et al. Bending and buckling of carbon nanotubes under large strain , 1997, Nature.
[187] S. Goh,et al. Fluoro-poly( ether imide )s and fluoro-poly( ether imide)/organa-soluble MMT clay nanocomposites: Synthesis, fabrication, characterization and thermal degradation kinetics study of their films , 2005 .
[188] Jiří Kresta,et al. Effect of titanium compounds on thermooxidative properties of stabilized polypropylene , 1969 .
[189] F. Gao. Clay/polymer composites: the story , 2004 .
[190] Tianxi Liu,et al. Biopolymer chitosan/montmorillonite nanocomposites: Preparation and characterization , 2005 .
[191] Mingshu Yang,et al. The influence of interlayer cations on the photo‐oxidative degradation of polyethylene/montmorillonite composites , 2004 .
[192] F. Morehead,et al. Some hydrodynamic properties of neutral suspensions of cellulose crystallites as related to size and shape , 1961 .
[193] Haitao Wang,et al. Transparent poly(methyl methacrylate)/silica/zirconia nanocomposites with excellent thermal stabilities , 2005 .
[194] P. Collins,et al. Effects of the removal of matrix substances as a pretreatment in the production of high strength resin impregnated wood based materials , 2001 .
[195] R. Bray,et al. The Mechanism of Action of Sugar Acetals as Nucleating Agents for Polypropylene , 1994 .
[196] G. Scott. Introduction to the abiotic degradation of carbon chain polymers , 1995 .
[197] Richard A. Vaia,et al. Framework for nanocomposites , 2004 .
[198] B. Rånby,et al. Photodegradation, photo-oxidation, and photostabilization of polymers;: Principles and applications , 1975 .
[199] Lihui Weng,et al. Morphology and properties of soy protein isolate thermoplastics reinforced with chitin whiskers. , 2004, Biomacromolecules.
[200] Yongshang Lu,et al. Novel biobased nanocomposites from soybean oil and functionalized organoclay. , 2006, Biomacromolecules.
[201] Wei Chen,et al. Morphology and thermal stabilization mechanism of LLDPE/MMT and LLDPE/LDH nanocomposites , 2006 .
[202] S. Okabe,et al. Partial discharge degradation of several biodegradable polymers , 2007 .
[203] S. Bourbigot,et al. Kinetic modelling of the thermal degradation: of polyamide-6 nanocomposite , 2000 .
[204] Krzysztof Pielichowski,et al. Polymer/montmorillonite nanocomposites with improved thermal properties: Part II. Thermal stability of montmorillonite nanocomposites based on different polymeric matrixes , 2007 .
[205] T. D. Fornes,et al. Polymer matrix degradation and color formation in melt processed nylon 6/clay nanocomposites , 2003 .
[206] McGuinness Jd. Migration from packaging materials into foodstuffs--a need for more fundamental information. , 1986 .
[207] Yu-Zhong Wang,et al. Thermal oxidative degradation behaviours of flame-retardant copolyesters containing phosphorous linked pendent group/montmorillonite nanocomposites , 2005 .
[208] Chan-Young Park,et al. Preparation and Properties of Biodegradable Thermoplastic Starch/Clay Hybrids , 2002 .
[209] M. Tian,et al. Morphology, Antimicrobial and Mechanical Properties of Nano-TiO2/Rubber Composites Prepared by Direct Blending , 2006 .
[210] W. Pan,et al. The characterization of organic modified clay and clay-filled PMMA nanocomposite , 2002 .
[211] C. A. Wilkie,et al. A carbocation substituted clay and its styrene nanocomposite , 2004 .
[212] Jonathan Wood. Winning image. , 2007, Nursing standard (Royal College of Nursing (Great Britain) : 1987).
[213] J. Gilman,et al. Solid-State NMR Investigation of Paramagnetic Nylon-6 Clay Nanocomposites. 2. Measurement of Clay Dispersion, Crystal Stratification, and Stability of Organic Modifiers , 2001 .
[214] Kazunobu Yamada,et al. Polylactide-Layered Silicate Nanocomposite: A Novel Biodegradable Material , 2002 .
[215] N. Ogata,et al. Structure and thermal/mechanical properties of poly(l‐lactide)‐clay blend , 1997 .
[216] S. Bourbigot,et al. The Use of Clay in an EVA-Based Intumescent Formulation. Comparison with the Intumescent Formulation Using Polyamide-6 Clay Nanocomposite As Carbonisation Agent , 2001 .
[217] P. Ding,et al. Synthesis of exfoliated PP/LDH nanocomposites via melt-intercalation : Structure, thermal properties, and photo-oxidative behavior in comparison with PP/MMT nanocomposites , 2006 .
[218] Joselito M. Razal,et al. Super-tough carbon-nanotube fibres , 2003, Nature.
[219] P. Messersmith,et al. Synthesis and barrier properties of poly(ε‐caprolactone)‐layered silicate nanocomposites , 1995 .
[220] G. Scott,et al. Migration of 4-substituted 2-hydroxy benzophenones in low density polyethylene: Part I—Diffusion characteristics , 1991 .
[221] A. Dufresne,et al. Thermoplastic starch-waxy maize starch nanocrystals nanocomposites. , 2006, Biomacromolecules.
[222] V. Álvarez,et al. Water uptake behavior of layered silicate/starch-polycaprolactone blend nanocomposites , 2008 .
[223] M. B. Amin,et al. Role of degradable plastic packaging materials in tropical areas , 1989 .
[224] B. Haidar,et al. Photooxidation of ethylene-propylene-diene/montmorillonite nanocomposites , 2005 .
[225] J. Sloan,et al. MECHANISMS OF PHOTO DEGRADATION FOR LAYERED SILICATE-POLYCARBONATE NANOCOMPOSITES , 2003 .
[226] Sergey Vyazovkin,et al. Kinetics of the Thermal and Thermo‐Oxidative Degradation of a Polystyrene–Clay Nanocomposite , 2004 .
[227] C. A. Wilkie,et al. Studies on the Mechanism by Which the Formation of Nanocomposites Enhances Thermal Stability , 2001 .
[228] F. Morehead,et al. Liquid Crystal Systems from Fibrillar Polysaccharides , 1959, Nature.
[229] Anant Kumar Singh,et al. Thermal characterization of organically modified montmorillonite , 2001 .
[230] A. M. Rao,et al. Large-scale purification of single-wall carbon nanotubes: process, product, and characterization , 1998 .
[231] L. H. Carvalho,et al. Influência da adição e da modificação química de uma carga mineral nanoparticulada nas propriedades mecânicas e no envelhecimento térmico de compósitos poliuretano/sisal , 2005 .
[232] J. W. Farrent,et al. High-performance composites from low-cost plant primary cell walls , 2005 .
[233] T. R. Hull,et al. An investigation into the decomposition and burning behaviour of ethylene-vinyl acetate copolymer nanocomposite materials , 2003 .
[234] K. Nakamae,et al. Elastic modulus of the crystalline regions of cellulose polymorphs , 1995 .
[235] A. Rinzler,et al. Electronic structure of atomically resolved carbon nanotubes , 1998, Nature.
[236] V. Colvin. The potential environmental impact of engineered nanomaterials , 2003, Nature Biotechnology.
[237] K. Shin,et al. Radiation resistant polymer–carbon nanotube nanocomposite thin films , 2005 .
[238] W. Pan,et al. The Characterization of Organic Modified Montmorillonite and Its Filled PMMA Nanocomposite , 2001 .
[239] R. Mülhaupt,et al. Thermal properties and flammability of acrylic nanocomposites based upon organophilic layered silicates , 1999 .
[240] B. Rånby. Fibrous macromolecular systems. Cellulose and muscle. The colloidal properties of cellulose micelles , 1951 .
[241] P. Klemchuk. Degradable plastics: A critical review , 1990 .
[242] S. Boyd,et al. Clay-Organic Complexes as Adsorbents for Phenol and Chlorophenols , 1986 .
[243] G. Alberti,et al. Nanocomposite membranes made of zirconium phosphate sulfophenylenphosphonate dispersed in polyvinylidene fluoride: Preparation and proton conductivity , 2005 .
[244] M. Nyden. Real-Time Measurements of Condensed-Phase Spectra in Burning Polymers , 1999 .
[245] Thomas J. Pinnavaia,et al. Polymer-layered silicate nanocomposites: an overview , 1999 .
[246] Sung Chul Yoon,et al. Thermal and mechanical characteristics of poly(L-lactic acid) nanocomposite scaffold. , 2003, Biomaterials.
[247] L. Zan,et al. A new polystyrene–TiO2 nanocomposite film and its photocatalytic degradation , 2004 .
[248] R. Singh,et al. Degradation and stabilization of ethylene-propylene copolymers and their blends: A critical review , 1991 .
[249] V. Gregoriou,et al. Ultraviolet Radiation Induced Cold Chemi‐Crystallization in Syndiotactic Polypropylene Clay‐Nanocomposites , 2006 .
[250] S. Lomakin,et al. Thermal degradation and combustion of a polypropylene nanocomposite based on organically modified layered aluminosilicate , 2006 .
[251] A. Dufresne,et al. Polysaccharide Microcrystals Reinforced Amorphous Poly(β-hydroxyoctanoate) Nanocomposite Materials , 1999 .
[252] M. Hirscher,et al. Hydrogen storage in carbon nanotubes. , 2003, Journal of nanoscience and nanotechnology.
[253] Alain Dufresne,et al. Review of recent research into cellulosic whiskers, their properties and their application in nanocomposite field. , 2005, Biomacromolecules.
[254] Zhou Lin-cheng,et al. Photo-Heat Transition of Coatings Derived from Furfural Resin and Fe2 O3 Nanoparticles , 2005 .
[255] G. Liao,et al. Evaluation of the thermal degradation of PC/ABS/montmorillonite nanocomposites , 2005 .
[256] S. Hsu,et al. Enhanced thermal and mechanical properties and biostability of polyurethane containing silver nanoparticles , 2006 .
[257] B. Rånby,et al. Role of singlet oxygen in photo‐oxidative degradation and photostabilization of polymers , 1975 .
[258] Hanning Xiao,et al. Thermal analysis and degradation mechanism of polyacrylate/ZnO nanocomposites , 2005 .
[259] Shufang Wang,et al. Characteristics and biodegradation properties of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/organophilic montmorillonite (PHBV/OMMT) nanocomposite , 2005 .
[260] W. K. Maser,et al. Large-scale production of single-walled carbon nanotubes by the electric-arc technique , 1997, Nature.
[261] Jiu-gao Yu,et al. Polyacrylate/(Chitosan Modified Montmorillonite) Nanocomposite: Water Absorption and Photostability , 2005 .
[262] K. Balasubramanian,et al. Chemically functionalized carbon nanotubes. , 2005, Small.
[263] Charles A. Wilkie,et al. Photo-oxidation of polymeric-inorganic nanocomposites: chemical, thermal stability and fire retardancy investigations , 2001 .
[264] M. Prato,et al. Biomedical applications of functionalised carbon nanotubes. , 2005, Chemical communications.
[265] D H Bamford,et al. Virus structures: Those magnificent molecular machines , 2000, Current Biology.
[266] N. J. Johnston,et al. Preparation and Characterization of Polyimide/Organoclay Nanocomposites , 2002 .
[267] M. Bousmina,et al. Biodegradable polymers and their layered silicate nanocomposites: In greening the 21st century materials world , 2005 .
[268] F. Gugumus. Advances in the stabilization of polyolefins , 1989 .
[269] J. Gilman,et al. Processing degradation of polyamide 6/montmorillonite clay nanocomposites and clay organic modifier , 2003 .
[270] Marco Zanetti,et al. Thermal behaviour of poly(propylene) layered silicate nanocomposites , 2001 .
[271] Serge Bourbigot,et al. Kinetic analysis of the thermal degradation of polystyrene–montmorillonite nanocomposite , 2004 .
[272] Mingshu Yang,et al. Photo-oxidative degradation of polyethylene/montmorillonite nanocomposite , 2003 .
[273] R. Mülhaupt,et al. Photo‐Oxidation of sPP/Organoclay Nanocomposites , 2005 .
[274] K. Oksman,et al. Orientation of cellulose nanowhiskers in polyvinyl alcohol , 2007 .
[275] K. Carrado. Synthetic organo- and polymer- clays : preparation, characterization, and materials applications. , 2000 .
[276] C. Joly,et al. Polypropylene/Cellulosic Fiber Composites Chemical Treatment of the Cellulose Assuming Compatibilization Between the Two Materials , 1996 .
[277] L. B. Ebert. Science of fullerenes and carbon nanotubes , 1996 .
[278] P. Maiti,et al. New Polylactide/Layered Silicate Nanocomposites: Role of Organoclays , 2002 .
[279] J. Guillet,et al. Photochemistry of ketone polymers. 17. Photodegradation of an amorphous ethylene-propylene copolymer , 1984 .
[280] José Augusto Marcondes Agnelli,et al. A first insight on composites of thermoplastic starch and kaolin , 2001 .
[281] K. Carrado. Introduction: Clay Structure,Surface Acidity, and Catalysis , 2004 .
[282] Nicole Grobert,et al. Carbon nanotubes – becoming clean , 2007 .