Conventional interferometric methods of surface profiling are limited in the magnitude of surface height that can be accurately measured because of phase ambiguity errors on steep local slopes. Other optical methods that have been developed for surface profiling frequency suffer from poor height resolution and low measurement speed for three-dimensional profiles. Contact profilometers such as stylus-based instruments suffer from slow measurement speed, especially when three-dimensional profiles of the surface are required. Stylus tips can also scratch delicate surfaces duringthe course ofthe measurement. A new method of optical, noncontact profiling of rough surfaces is described that utilizes interferometric techniques as well as digital signal-processing algorithms to produce fast, accurate, and repeatable three-dimensional surface profile measurements.
[1]
J. Wyant,et al.
Multiple-wavelength phase-shifting interferometry.
,
1985,
Applied optics.
[2]
Mark P. Davidson,et al.
An Application Of Interference Microscopy To Integrated Circuit Inspection And Metrology
,
1987,
Advanced Lithography.
[3]
Margaret Stedman.
Limits Of Surface Measurement By Optical Probes
,
1989,
Other Conferences.
[4]
G S Kino,et al.
Mirau correlation microscope.
,
1990,
Applied optics.
[5]
T C Strand,et al.
Profilometry with a coherence scanning microscope.
,
1990,
Applied optics.