Effect of guanidinium chloride in eliminating O2− electron extraction barrier on a SnO2 surface to enhance the efficiency of perovskite solar cells

Owing to their low cost, easy fabrication and excellent chemical stability properties, tin dioxide (SnO2) nanoparticles have been widely employed as an electron transfer material in many high-efficiency perovskite solar cells (PeSCs). However, the adsorbed oxygen species (i.e. O2−) on the surface of the SnO2 layer, which are induced by the annealing process under ambient environment, have always been overlooked. In general, the adsorption of oxygen creates an energy barrier at the SnO2/perovskite interface, impairing the efficiency of PeSCs. In this work, by using guanidinium (GA) chloride to modify the SnO2 surface, we have successfully improved the power conversion efficiency (PCE) of PeSCs from 15.33% (no GA-modification) to 18.46%, with a maximum fill factor of 80%. The performance enhancement is mainly attributed to the reduced energy barrier at the SnO2/perovskite interface due to the strong coupling between the GA and the adsorbed oxygen, which has been supported by the FTIR and XPS results. The strategy of reducing the charge extraction barrier by GA modification has been demonstrated to be an efficient approach to improve both the PCE and stability.

[1]  Guangdong Zhou,et al.  Coordinated Optical Matching of a Texture Interface Made from Demixing Blended Polymers for High Performance Inverted Perovskite Solar Cells. , 2019, ACS nano.

[2]  Jae‐Hyung Jang,et al.  Luminescent down-shifting CsPbBr3 perovskite nanocrystals for flexible Cu(In,Ga)Se2 solar cells. , 2019, Nanoscale.

[3]  E. Palomares,et al.  Interfacial recombination kinetics in aged perovskite solar cells measured using transient photovoltage techniques. , 2019, Nanoscale.

[4]  Yanzhao Yang,et al.  Extraction and stripping of platinum (IV) from acidic chloride media using guanidinium ionic liquid , 2019, Journal of Molecular Liquids.

[5]  Aixiang He,et al.  VOCs gas sensing properties on SnO2 (110) surface with dissociated oxygen species pre-adsorbed: experiments and DFT analysis , 2019, Journal of Materials Science: Materials in Electronics.

[6]  Trinh Minh Ngoc,et al.  Effective design and fabrication of low-power-consumption self-heated SnO2 nanowire sensors for reducing gases , 2019, Sensors and Actuators B: Chemical.

[7]  N. Park,et al.  Multifunctional Chemical Linker Imidazoleacetic Acid Hydrochloride for 21% Efficient and Stable Planar Perovskite Solar Cells , 2019, Advanced materials.

[8]  E. Diau,et al.  Strategies To Improve Performance and Stability for Tin-Based Perovskite Solar Cells , 2019, ACS Energy Letters.

[9]  Sangyoon Lee,et al.  Phase-controlled synthesis of SnOx thin films by atomic layer deposition and post-treatment , 2019, Applied Surface Science.

[10]  Cunyun Xu,et al.  Nuclei position-control and crystal growth-guidance on frozen substrates for high-performance perovskite solar cells. , 2019, Nanoscale.

[11]  Z. Ge,et al.  Simple, Robust, and Going More Efficient: Recent Advance on Electron Transport Layer‐Free Perovskite Solar Cells , 2019, Advanced Energy Materials.

[12]  Jinhyun Kim,et al.  Origins of Efficient Perovskite Solar Cells with Low-Temperature Processed SnO2 Electron Transport Layer , 2019, ACS Applied Energy Materials.

[13]  Zefeng Chen,et al.  Interlayer Interaction Enhancement in Ruddlesden–Popper Perovskite Solar Cells toward High Efficiency and Phase Stability , 2019, ACS Energy Letters.

[14]  Hyunjung Shin,et al.  Atomic layer deposition of a SnO2 electron-transporting layer for planar perovskite solar cells with a power conversion efficiency of 18.3. , 2019, Chemical communications.

[15]  Mengqi Cui,et al.  Moisture-tolerant supermolecule for the stability enhancement of organic-inorganic perovskite solar cells in ambient air. , 2019, Nanoscale.

[16]  Mingkui Wang,et al.  Will organic–inorganic hybrid halide lead perovskites be eliminated from optoelectronic applications? , 2019, Nanoscale advances.

[17]  R. Friend,et al.  Extrinsic Electron Concentration in SnO2 Electron Extracting Contact in Lead Halide Perovskite Solar Cells , 2019, Advanced Materials Interfaces.

[18]  Dongsheng Xu,et al.  SnO2‐in‐Polymer Matrix for High‐Efficiency Perovskite Solar Cells with Improved Reproducibility and Stability , 2018, Advanced materials.

[19]  Noriya Izu,et al.  Fabrication and H2-Sensing Properties of SnO2 Nanosheet Gas Sensors , 2018, ACS omega.

[20]  M. K. Hota,et al.  P‐Type SnO Thin Film Phototransistor with Perovskite‐Mediated Photogating , 2018, Advanced Electronic Materials.

[21]  S. Muniyappan,et al.  Systematic discussions on structural, optical, mechanical, electrical and its application to NLO devices of a novel semi-organic single crystal: Guanidinium tetrafluoroborate (GFB) , 2018, Optics & Laser Technology.

[22]  Dong Yang,et al.  High efficiency planar-type perovskite solar cells with negligible hysteresis using EDTA-complexed SnO2 , 2018, Nature Communications.

[23]  Y. Hao,et al.  Enhanced Planar Perovskite Solar Cell Performance via Contact Passivation of TiO2/Perovskite Interface with NaCl Doping Approach , 2018, ACS Applied Energy Materials.

[24]  Xingwang Zhang,et al.  SnO2 : A Wonderful Electron Transport Layer for Perovskite Solar Cells. , 2018, Small.

[25]  Abdullah M. Asiri,et al.  Efficient Planar Perovskite Solar Cells Using Passivated Tin Oxide as an Electron Transport Layer , 2018, Advancement of science.

[26]  Rui Huang,et al.  Remarkably Enhanced Room-Temperature Hydrogen Sensing of SnO2 Nanoflowers via Vacuum Annealing Treatment , 2018, Sensors.

[27]  N. Zheng,et al.  Efficient, Hysteresis‐Free, and Stable Perovskite Solar Cells with ZnO as Electron‐Transport Layer: Effect of Surface Passivation , 2018, Advanced materials.

[28]  N. Koch,et al.  Large guanidinium cation mixed with methylammonium in lead iodide perovskites for 19% efficient solar cells , 2017 .

[29]  C. Chang,et al.  An integrated approach towards the fabrication of highly efficient and long-term stable perovskite nanowire solar cells , 2017 .

[30]  S. Zakeeruddin,et al.  Isomer‐Pure Bis‐PCBM‐Assisted Crystal Engineering of Perovskite Solar Cells Showing Excellent Efficiency and Stability , 2017, Advanced materials.

[31]  Aram Amassian,et al.  Amorphous Tin Oxide as a Low-Temperature-Processed Electron-Transport Layer for Organic and Hybrid Perovskite Solar Cells. , 2017, ACS applied materials & interfaces.

[32]  I. Oleynik,et al.  Sensor Effect in Oxide Films with a Large Concentration of Conduction Electrons , 2017 .

[33]  T. Nguyen-Tran,et al.  Synthesis of Tantalum-Doped Tin Oxide Thin Films by Magnetron Sputtering for Photovoltaic Applications , 2017, Journal of Electronic Materials.

[34]  Z. Yin,et al.  Enhanced electron extraction using SnO2 for high-efficiency planar-structure HC(NH2)2PbI3-based perovskite solar cells , 2016, Nature Energy.

[35]  A. Jen,et al.  Enhanced Efficiency and Stability of Inverted Perovskite Solar Cells Using Highly Crystalline SnO2 Nanocrystals as the Robust Electron‐Transporting Layer , 2016, Advanced materials.

[36]  Mingkui Wang,et al.  Amino‐Functionalized Conjugated Polymer as an Efficient Electron Transport Layer for High‐Performance Planar‐Heterojunction Perovskite Solar Cells , 2016 .

[37]  Yang Yang,et al.  Interfacial Degradation of Planar Lead Halide Perovskite Solar Cells. , 2016, ACS nano.

[38]  F. Giordano,et al.  Enhanced electronic properties in mesoporous TiO2 via lithium doping for high-efficiency perovskite solar cells , 2016, Nature Communications.

[39]  Wenguang Li,et al.  Improving the Extraction of Photogenerated Electrons with SnO2 Nanocolloids for Efficient Planar Perovskite Solar Cells , 2015 .

[40]  G. Fang,et al.  Effects of annealing temperature of tin oxide electron selective layers on the performance of perovskite solar cells , 2015 .

[41]  Mohammad Khaja Nazeeruddin,et al.  Improved performance and stability of perovskite solar cells by crystal crosslinking with alkylphosphonic acid ω-ammonium chlorides. , 2015, Nature chemistry.

[42]  Hongwei Lei,et al.  Low-temperature solution-processed tin oxide as an alternative electron transporting layer for efficient perovskite solar cells. , 2015, Journal of the American Chemical Society.

[43]  Xiaofeng Wang,et al.  Sensing Mechanism of SnO2 (110) Surface to CO: Density Functional Theory Calculations , 2014 .

[44]  Zongxian Yang,et al.  Direct CO oxidation by lattice oxygen on the SnO2(110) surface: a DFT study. , 2014, Physical Chemistry, Chemical Physics - PCCP.

[45]  Zhen Jin,et al.  Metal Oxide Nanostructures and Their Gas Sensing Properties: A Review , 2012, Sensors.

[46]  Dong Xiang,et al.  Metal Oxide Gas Sensors: Sensitivity and Influencing Factors , 2010, Sensors.

[47]  A. Gurlo,et al.  Interplay between O2 and SnO2: oxygen ionosorption and spectroscopic evidence for adsorbed oxygen. , 2006, Chemphyschem : a European journal of chemical physics and physical chemistry.

[48]  S. H. Park,et al.  Controlled crystal facet of MAPbI3 perovskite for highly efficient and stable solar cell via nucleation modulation. , 2018, Nanoscale.