Autobalancing Analog Front End for Full-Range Differential Capacitive Sensing

The authors here propose an analog interface for differential capacitance estimation, able to reveal and quantify capacitive variations. Different from other works in the literature, the proposed interface can operate on a full-range scale. This solution takes inspiration from a preliminary work of the same authors, whose working principle is based on a modified De-Sauty AC bridge configuration; in particular, two (differential) capacitors and two resistors are employed, one of which is implemented by a voltage-controlled resistor (VCR). In this paper, the electronic interface has been redesigned to obtain full-range operation and a linear input–output characteristic. The implemented autobalancing mechanism controls the VCR generating a reference voltage following the sensor output. Simulation results in two different circuit configurations performed by OrCAD PSpice have shown a very good agreement with a theoretical model implemented in MATLAB/Simulink environment. In addition, an evaluation of the goodness of the experimental measurements at steady and unsteady conditions is given. Experimental tests on a discrete-component prototype have been carried out using an automated test equipment including National Instruments tools and a dedicated software in the LabVIEW environment. Measurements have shown satisfactory results, the standard deviation being on the order of 0.01, in the worst case. The linearity error has been evaluated as well, resulting in lower than 1% full scale.

[1]  Shien Hui,et al.  A high-accuracy, high-speed interface circuit for differential-capacitance transducer , 2006 .

[2]  Kenzo Watanabe,et al.  A high-accuracy high-speed signal processing circuit of differential-capacitance transducers , 1998, IEEE Trans. Instrum. Meas..

[3]  Fengtian Han,et al.  A differential capacitance to voltage converter for electrostatic levitation applications , 2002 .

[4]  V. Jagadeesh Kumar,et al.  Digital Converter for Differential Capacitive Sensors , 2006, IEEE Transactions on Instrumentation and Measurement.

[5]  Giuseppe Ferri,et al.  Analog Circuits and Systems for Voltage-Mode and Current-Mode Sensor Interfacing Applications , 2011 .

[6]  Daniele Marioli,et al.  A multichannel DSP-based instrument for displacement measurement using differential variable reluctance transducer , 2005, IEEE Transactions on Instrumentation and Measurement.

[7]  Alessandro Trifiletti,et al.  88-$\mu$ A 1-MHz Stray-Insensitive CMOS Current-Mode Interface IC for Differential Capacitive Sensors , 2014, IEEE Transactions on Circuits and Systems I: Regular Papers.

[8]  Giuseppe Ferri,et al.  Novel Modified De-Sauty Autobalancing Bridge-Based Analog Interfaces for Wide-Range Capacitive Sensor Applications , 2014, IEEE Sensors Journal.

[9]  H. Funabashi,et al.  A Z-axis differential capacitive SOI accelerometer with vertical comb electrodes , 2004, 17th IEEE International Conference on Micro Electro Mechanical Systems. Maastricht MEMS 2004 Technical Digest.

[10]  Vincenzo Stornelli,et al.  A standard CMOS technology fully-analog differential capacitance sensor front-end , 2015, 2015 6th International Workshop on Advances in Sensors and Interfaces (IWASI).

[11]  Kenzo Watanabe,et al.  A switched-capacitor interface for capacitive pressure sensors , 1991, [1991] Conference Record. IEEE Instrumentation and Measurement Technology Conference.

[12]  Tarikul Islam,et al.  A time domain bridge-based impedance measurement technique for wide-range lossy capacitive sensors , 2015 .

[13]  V. Matko,et al.  Temperature-compensated capacitance–frequency converter with high resolution , 2014 .

[14]  Boby George,et al.  Switched Capacitor Signal Conditioning for Differential Capacitive Sensors , 2007, IEEE Transactions on Instrumentation and Measurement.

[15]  M. Horenstein,et al.  Differential capacitive position sensor for planar MEMS structures with vertical motion , 2000 .

[16]  Leonardo Pantoli,et al.  Automatic Bridge-based Interface for Differential Capacitive Full Sensing☆ , 2016 .

[17]  Ferran Reverter,et al.  Direct interface circuit for capacitive humidity sensors , 2008 .

[18]  Vincenzo Stornelli,et al.  Full range analog Wheatstone bridge‐based automatic circuit for differential capacitance sensor evaluation , 2017, Int. J. Circuit Theory Appl..

[19]  N. Yazdi,et al.  Precision readout circuits for capacitive microaccelerometers , 2004, Proceedings of IEEE Sensors, 2004..

[20]  G. Fedder,et al.  A Low-Noise Low-Offset Capacitive Sensing Amplifier for a 50-g = Hz Monolithic CMOS MEMS Accelerometer , 2004 .

[21]  G. Ferri,et al.  Analog current-mode interfaces for differential capacitance sensing , 2016, 2016 IEEE Sensors Applications Symposium (SAS).

[22]  Pengcheng Hu,et al.  A Capacitive Sensor for the Measurement of Departure From the Vertical Movement , 2016, IEEE Transactions on Instrumentation and Measurement.

[23]  Ferran Reverter,et al.  Interfacing Differential Capacitive Sensors to Microcontrollers: A Direct Approach , 2010, IEEE Transactions on Instrumentation and Measurement.

[24]  Robert Puers,et al.  Capacitive sensors: When and how to use them☆ , 1993 .

[25]  Andrea Baschirotto,et al.  Electronic interfaces , 2007 .

[26]  Larry K. Baxter.  Capacitive Sensor Basics , 1997 .

[27]  G.K. Fedder,et al.  A low-noise low-offset capacitive sensing amplifier for a 50-/spl mu/g//spl radic/Hz monolithic CMOS MEMS accelerometer , 2004, IEEE Journal of Solid-State Circuits.

[28]  Wouter Olthuis,et al.  A sensitive differential capacitance to voltage converter for sensor applications , 1999, IEEE Trans. Instrum. Meas..