Numerical Analysis of Flow in Building Arrangement: Computational Domain Discretization

[1]  Junwei Su,et al.  A two‐layer mesh method for discrete element simulation of gas‐particle systems with arbitrarily polyhedral mesh , 2015 .

[2]  Stefano Mauro,et al.  Wind turbine CFD modeling using a correlation-based transitional model , 2013 .

[3]  Renata Gnatowska,et al.  Polyhedral meshing as an innovative approach to computational domain discretization of a cyclone in a fluidized bed CLC unit , 2017 .

[4]  A. Jamrozik,et al.  Modeling of thermal cycle ci engine with multi-stage fuel injection , 2017 .

[5]  Yoshihide Tominaga,et al.  AIJ guidelines for practical applications of CFD to pedestrian wind environment around buildings , 2008 .

[6]  Robert J. Martinuzzi,et al.  Turbulent Flow Around Two Interfering Surface-Mounted Cubic Obstacles in Tandem Arrangement , 2000 .

[7]  J. Krzywański,et al.  Modeling of bed-to-wall heat transfer coefficient in a large-scale CFBC by fuzzy logic approach , 2016 .

[8]  Renata Gnatowska,et al.  CFD modelling and PIV experimental validation of flow fields in urban environments , 2017 .

[9]  J. Gunn,et al.  Computational fluid dynamics modelling in cardiovascular medicine , 2015, Heart.

[10]  Peter Richards,et al.  Wind pressures on a 6m cube , 2001 .

[11]  Robert J. Martinuzzi,et al.  VORTEX SHEDDING FROM TWO SURFACE-MOUNTED CUBES IN TANDEM , 2004, Proceeding of Third Symposium on Turbulence and Shear Flow Phenomena.

[12]  R. Gnatowska.  Wind-induced pressure loads on buildings in tandem arrangement in urban environment , 2018, Environmental Fluid Mechanics.

[13]  Bert Blocken,et al.  CFD simulation for pedestrian wind comfort and wind safety in urban areas: General decision framework and case study for the Eindhoven University campus , 2012, Environ. Model. Softw..

[14]  Holger Koss,et al.  On differences and similarities of applied wind comfort criteria , 2006 .

[15]  Bje Bert Blocken,et al.  Computational Fluid Dynamics for urban physics: Importance, scales, possibilities, limitations and ten tips and tricks towards accurate and reliable simulations , 2015 .

[16]  Thomas Redel,et al.  Tetrahedral vs. polyhedral mesh size evaluation on flow velocity and wall shear stress for cerebral hemodynamic simulation , 2011, Computer methods in biomechanics and biomedical engineering.

[17]  Arkadiusz Jamrozik,et al.  Numerical simulation of two-stage combustion in SI engine with prechamber , 2013 .

[18]  Bert Blocken,et al.  50 years of Computational Wind Engineering: Past, present and future , 2014 .

[19]  Aya Hagishima,et al.  Analysis of airflow over building arrays for assessment of urban wind environment , 2013 .

[20]  A. Melling.  Tracer particles and seeding for particle image velocimetry , 1997 .

[21]  J. Krzywanski,et al.  Artificial Intelligence Treatment of SO2 Emissions from CFBC in Air and Oxygen-Enriched Conditions , 2016 .

[22]  Bje Bert Blocken,et al.  Pedestrian-level wind conditions around buildings: Review of wind-tunnel and CFD techniques and their accuracy for wind comfort assessment , 2016 .

[23]  Eddy Willemsen,et al.  Design for wind comfort in The Netherlands: Procedures, criteria and open research issues , 2007 .

[24]  Renata Gnatowska.  Aerodynamic Characteristics of Three-Dimensional Surface-Mounted Objects in Tandem Arrangement , 2011 .

[25]  Bert Blocken,et al.  Ten iterative steps for model development and evaluation applied to Computational Fluid Dynamics for Environmental Fluid Mechanics , 2012, Environ. Model. Softw..