Polarization dependence of electroluminescence from closely-stacked and columnar quantum dots

Quantum dots (QDs) have a potential for application in semiconductor optical amplifiers (SOAs), due to their high saturation power related to the low differential gain, fast gain recovery and wide gain spectrum compared to quantum wells. Besides all advantages, QDs realized by Stranski-Krastanov growth mode have a flat shape which leads to a gain anisotropy and a related transverse magnetic (TM) and -electric (TE) polarization dependence as compared to bulk material. This has so far prevented their applications in SOAs. It has been suggested that control of optical polarization anisotropy of the QD can be obtained through QD shape engineering, in closely stacked or columnar QDs (CQDs). To this aim, we have fabricated and tested SOA structures based on closely-stacked and columnar QDs. Closely-stacked InAs QDs with 4, 6 and 10 nm GaAs spacer showed a minor improvement in the ratio of TM and TE integrated electroluminescence (EL) over standard QDs along with a strong reduction in efficiency. In contrast, a large improvement was obtained in CQDs, depending on the number of stacked submonolayers which can be attributed to the more symmetric shape of columnar QDs. A relatively small spectral separation (ΔE ~ 21 meV) between TE- and TM-EL peaks has been observed showing that heavy- and light hole-like states, respectively are energetically close in these QDs. These results indicate that columnar QDs have a significant potential for polarization-independent QD SOA.

[1]  Mitsuru Sugawara,et al.  Artificial control of optical gain polarization by stacking quantum dot layers , 2006 .

[2]  Jesper Mørk,et al.  Quantum dot amplifiers with high output power and low noise , 2003 .

[3]  O. Wada,et al.  Polarization controlled edge emission from columnar InAs/GaAs self‐assembled quantum dots , 2003 .

[4]  Y. Arakawa,et al.  An ultrawide-band semiconductor optical amplifier having an extremely high penalty-free output power of 23 dBm achieved with quantum dots , 2005, IEEE Photonics Technology Letters.

[5]  Yasuhiko Arakawa,et al.  Controlling Polarization of 1.55-µm Columnar InAs Quantum Dots with Highly Tensile-Strained InGaAsP Barriers on InP(001) , 2006 .

[6]  Hiroshi Ishikawa,et al.  Lasing with low threshold current and high output power from columnar-shaped InAs/GaAs quantum dots , 1998 .

[7]  Hiroshi Ishikawa,et al.  Quantum-Dot Semiconductor Optical Amplifiers for High Bit-Rate Signal Processing over 40 Gbit/s , 2001 .

[8]  Tomoyuki Akiyama,et al.  Optical Polarization Properties of InAs/GaAs Quantum Dot Semiconductor Optical Amplifier , 2004 .

[9]  Nikolai N. Ledentsov,et al.  Optical anisotropy in vertically coupled quantum dots , 1999 .

[10]  Sanguan Anantathanasarn,et al.  Stacking and polarization control of wavelength-tunable (1.55 mum region) InAs/InGaAsP/InP (100) quantum dots , 2006 .

[11]  A. Fiore,et al.  Optical and electronic properties of GaAs-based structures with columnar quantum dots , 2007 .

[12]  K. Hinzer,et al.  Lasing in quantum-dot ensembles with sharp adjustable electronic shells , 1999 .

[13]  Mitsuru Sugawara,et al.  Polarization-Independent Photoluminescence from Columnar InAs/GaAs Self-Assembled Quantum Dots , 2002 .