Noise Discrimination Method for Partial Discharge Current Focused on Damped Oscillation Waveform

[1]  Xiandong Ma,et al.  Interpretation of wavelet analysis and its application in partial discharge detection , 2002 .

[2]  H. G. Sedding,et al.  Practical implementation of ultrawideband partial discharge detectors , 1992 .

[3]  A. Cavallini,et al.  Permanent PD monitoring for generators: Smart alarm management , 2011, 2011 IEEE PES Innovative Smart Grid Technologies.

[4]  Bingsheng Wu,et al.  Wavelet Denoising and Its Implementation in LabVIEW , 2009, 2009 2nd International Congress on Image and Signal Processing.

[5]  G. Robles,et al.  Automatic selection of frequency bands for the power ratios separation technique in partial discharge measurements: part I, fundamentals and noise rejection in simple test objects , 2015, IEEE Transactions on Dielectrics and Electrical Insulation.

[6]  Hui Ma,et al.  Time-frequency sparsity map on automatic partial discharge sources separation for power transformer condition assessment , 2015, IEEE Transactions on Dielectrics and Electrical Insulation.

[7]  H. Okubo,et al.  A novel technique for partial discharge and breakdown investigation based on current pulse waveform analysis , 2005, IEEE Transactions on Dielectrics and Electrical Insulation.

[8]  Masayoshi Tanaka,et al.  Electromagnetic waves from partial discharges and their detection using patch antenna , 2010, IEEE Transactions on Dielectrics and Electrical Insulation.

[9]  F. Garnacho,et al.  A clustering technique for partial discharge and noise sources identification in power cables by means of waveform parameters , 2016, IEEE Transactions on Dielectrics and Electrical Insulation.

[10]  Jian Li,et al.  Scale dependent wavelet selection for de-noising of partial discharge detection , 2010, IEEE Transactions on Dielectrics and Electrical Insulation.