Storage-enhanced thermal management for mobile devices

During regular use, mobile devices generate significant amounts of heat. In this paper, we discuss the use of phase-change materials (PCM) as an energy storage medium to lower the energy consumption of temperature control devices in mobile systems. We adopt a systems perspective and show that the fundamental effect of latent-heat storage is to increase the time constant of the response of the system to changes in heat input without affecting the gain. We also demonstrate that PCM-based cooling reduces energy consumption when used in conjunction with active cooling in a hierarchical control structure, and establish a connection between the dynamics of the integrated system, energy savings and the quantity and geometric properties of the PCM elements. Composite heat sinks consisting of PCM elements confined in a matrix material with high thermal conductivity represent a promising practical implementation of PCM-based cooling. Using a first-principles model and a novel algorithm, we present a method for optimizing the size and number of the PCM elements in the matrix, which effectively amounts to “tuning” the PCM-based controller. We study the PCM-enhanced thermal management of a computer microchip to illustrate the theoretical concepts.

[1]  G. Ziskind,et al.  Numerical investigation of a PCM-based heat sink with internal fins , 2005 .

[2]  A. D. Solomon,et al.  Mathematical Modeling Of Melting And Freezing Processes , 1992 .

[3]  J. Selman,et al.  Thermal conductivity enhancement of phase change materials using a graphite matrix , 2006 .

[4]  Arunn Narasimhan,et al.  Genetic Algorithm Based Optimization of PCM Based Heat Sinks and Effect of Heat Sink Parameters on Operational Time , 2008 .

[5]  Xiaoyan Yuan,et al.  Thermal conductivity of microPCMs-filled epoxy matrix composites , 2011 .

[6]  A. Sari,et al.  Thermal conductivity and latent heat thermal energy storage characteristics of paraffin/expanded graphite composite as phase change material , 2007 .

[7]  Said Al-Hallaj,et al.  Active (air-cooled) vs. Passive (PCM) Thermal Management of High Power Li-ion Packs: Limitation of Temperature Rise and Uniformity of Temperature Distribution , 2008 .

[8]  F. Tan,et al.  Cooling of portable hand-held electronic devices using phase change materials in finned heat sinks , 2010 .

[9]  Heinz Unbehauen,et al.  Structure identification of nonlinear dynamic systems - A survey on input/output approaches , 1990, Autom..

[10]  A. Sharma,et al.  Review on thermal energy storage with phase change materials and applications , 2009 .

[11]  Changying Zhao,et al.  A numerical investigation of heat transfer in phase change materials (PCMs) embedded in porous metals , 2011 .

[12]  D. Hale,et al.  Phase-change materials handbook , 1971 .

[13]  C. Balaji,et al.  Method to improve geometry for heat transfer enhancement in PCM composite heat sinks , 2005 .

[14]  S. Krishnan,et al.  A novel hybrid heat sink using phase change materials for transient thermal management of electronics , 2004, The Ninth Intersociety Conference on Thermal and Thermomechanical Phenomena In Electronic Systems (IEEE Cat. No.04CH37543).

[15]  H. A. Barker.  Design of multilevel pseudorandom signals for specified harmonic content , 1991 .

[16]  William D. Callister,et al.  Materials Science and Engineering: An Introduction , 1985 .