Combined Mechanical and Command Design for Micro-Milling Machines

[1]  L. K. Lauderbaugh Saunders.  Process dynamics models for the control of end milling , 2000 .

[2]  Chi Fai Cheung,et al.  An investigation of residual form error compensation in the ultra-precision machining of aspheric surfaces , 2000 .

[3]  Kazuya Kato,et al.  Generation of Sculptured Surfaces by Means of an Ultraprecision Milling Machine , 1993 .

[4]  Warren P. Seering,et al.  Preshaping Command Inputs to Reduce System Vibration , 1990 .

[5]  Masayoshi Tomizuka,et al.  High-speed end milling using a feedforward control architecture , 1996 .

[6]  R. Haftka,et al.  An approach to structure/control simultaneous optimization for large flexible spacecraft , 1987 .

[7]  Wayne J. Book,et al.  Filtering micro-manipulator wrist commands to prevent flexible base motion , 1995, Proceedings of 1995 American Control Conference - ACC'95.

[8]  Mark W. Noakes,et al.  Generalized inputs for damped-vibration control of suspended payloads , 1992, Robotics Auton. Syst..

[9]  Giacomo Bianchi,et al.  Towards Virtual Engineering in Machine Tool Design , 1996 .

[11]  Ibrahim N. Tansel,et al.  Modeling micro-end-milling operations. Part II: tool run-out , 2000 .

[12]  Tian Huang,et al.  Simulation and experimental investigation of the end milling process considering the cutter flexibility , 2003 .

[13]  Masayoshi Tomizuka,et al.  Robust motion controller design for high-accuracy positioning systems , 1996, IEEE Trans. Ind. Electron..

[14]  S. Futami,et al.  Nanometer positioning and its micro-dynamics , 1990 .

[15]  William Singhose,et al.  LIMITING HIGH MODE VIBRATION AND RISE TIME IN FLEXIBLE TELEROBOTIC ARMS , 2000 .

[16]  Ibrahim N. Tansel,et al.  Modeling micro-end-milling operations. Part I: analytical cutting force model , 2000 .

[17]  William Singhose,et al.  An input shaping controller enabling cranes to move without sway , 1997 .

[18]  William Singhose,et al.  Concurrent design of input shaping and feedback control for insensitivity to parameter variations , 2000, 6th International Workshop on Advanced Motion Control. Proceedings (Cat. No.00TH8494).

[19]  Masayoshi Tomizuka,et al.  Zero Phase Error Tracking Algorithm for Digital Control , 1987 .

[20]  Allan D. Spence,et al.  On the dynamics of ball end milling: modeling of cutting forces and stability analysis , 1998 .

[21]  K. W. Wang,et al.  Design of an optimal damper to minimize the vibration of machine tool structures subject to random excitation , 2005, Engineering with Computers.

[22]  Hsi-Yung Feng,et al.  A Flexible Ball-End Milling System Model for Cutting Force and Machining Error Prediction , 1996 .

[23]  Don A. Lucca,et al.  Aspects of Surface Generation in Orthogonal Ultraprecision Machining , 1994 .

[24]  Dan Simon,et al.  Optimal trigonometric robot joint trajectories , 1991, Robotica.

[25]  W. Lee.  Prediction of microcutting force variation in ultra-precision machining , 1990 .

[26]  William Singhose,et al.  Concurrent Design of Input Shaping and Proportional Plus Derivative Feedback Control , 2002 .

[27]  Blake Hannaford,et al.  Online improvement of speed and tracking performance on repetitive paths , 1998, IEEE Trans. Control. Syst. Technol..

[28]  Paul Sas,et al.  Towards a mechatronic compiler , 2001 .

[29]  Kuang-Hua Fuh,et al.  A predicted milling force model for high-speed end milling operation , 1997 .

[30]  S. Smith,et al.  An Overview of Modeling and Simulation of the Milling Process , 1991 .

[31]  John W. Sutherland,et al.  An Improved Method for Cutting Force and Surface Error Prediction in Flexible End Milling Systems , 1986 .

[32]  Yusuf Altintas,et al.  Manufacturing Automation: Metal Cutting Mechanics, Machine Tool Vibrations, and CNC Design , 2000 .

[33]  N. Seth,et al.  Vibration control of a coordinate measuring machine , 1992, [Proceedings 1992] The First IEEE Conference on Control Applications.

[34]  K. C. Park,et al.  Structural tailoring and feedback control synthesis - An interdisciplinary approach , 1990 .

[35]  H.M.J. Van Brussel,et al.  Mechatronics-a powerful concurrent engineering framework , 1996 .

[36]  Yoshimi Takeuchi,et al.  Development of Ultraprecision Micro Grooving : Manufacture of V-Shaped Groove , 2000 .

[37]  L. A. Schmit,et al.  Control Augmented Structural Synthesis with Transient Response Constraints , 1987 .

[38]  Jen Fin Lin,et al.  Kinematic Analysis of the Ball Screw Mechanism Considering Variable Contact Angles and Elastic Deformations , 2003 .

[39]  F. Ismail,et al.  Improving Stability of Slender End Mills Against Chatter , 1986 .

[40]  William E. Singhose,et al.  Effects of input shaping on two-dimensional trajectory following , 1996, IEEE Trans. Robotics Autom..

[41]  Y. Takeuchi,et al.  Ultraprecision 3D Micromachining of Glass , 1996 .

[42]  Masayoshi Tomizuka,et al.  A New Approach of Coordinated Motion Control Subjected to Actuator Saturation , 2001 .

[43]  Singiresu S. Rao,et al.  Robustness Improvement of Actively Controlled Structures through Structural Modifications , 1990 .

[44]  Jahangir Rastegar,et al.  A new model-based tracking controller for robot manipulators using trajectory pattern inverse dynamics , 1992, IEEE Trans. Robotics Autom..

[45]  Dong-Woo Cho,et al.  Development of a virtual machining system, part 3: cutting process simulation in transient cuts , 2002 .

[46]  S. B. Chang,et al.  Submicrometer overshoot control of rapid and precise positioning , 1997 .

[47]  Hans Kurt Tönshoff,et al.  Three-Dimensional Micromachining by Machine Tools , 1997 .

[48]  Yusuf Altintas,et al.  High speed CNC system design. Part I: jerk limited trajectory generation and quintic spline interpolation , 2001 .

[49]  F. Rotella,et al.  Hybrid real time adaptive PID control system for turning , 1996, Proceeding of the 1996 IEEE International Conference on Control Applications IEEE International Conference on Control Applications held together with IEEE International Symposium on Intelligent Contro.

[50]  O. Smith.  Posicast Control of Damped Oscillatory Systems , 1957 .

[51]  Radovan Kovacevic,et al.  Modeling of waterjet guided laser grooving of silicon , 2003 .

[52]  Wen-Jun Zhang,et al.  Integrated design of mechanical structure and control algorithm for a programmable four-bar linkage , 1999 .

[53]  Alexander H. Slocum,et al.  Adaptive control strategies for a precision machine tools axis , 1995 .

[54]  J. Franse,et al.  Dynamic characteristics of the Lawrence Livermore National Laboratory Precision Engineering Research Lathe , 1991 .

[55]  Satoshi Sakamoto,et al.  Prediction of cutting forces and machining error in ball end milling of curved surfaces -I theoretical analysis , 2001 .

[56]  John L. Junkins,et al.  Robustness optimization of structural and controller parameters , 1989 .

[57]  Kam K. Leang,et al.  Experimental and Theoretical Results in Output-Trajectory Redesign for Flexible Structures , 1998 .

[58]  N. S. Khot,et al.  Structure/control optimization to improve the dynamic response of space structures , 1988 .

[59]  Carlos Canudas de Wit,et al.  A survey of models, analysis tools and compensation methods for the control of machines with friction , 1994, Autom..

[60]  Yuji Furukawa,et al.  Calculations of the effect of material anisotropy on microcutting processes , 1994 .

[61]  David H. Frakes,et al.  SIMULATING MOTION OF AN OPERATOR- CONTROLLED GANTRY CRANE IN A CLUTTERED WORK ENVIRONMENT , 2000 .

[62]  P.H. Meckl,et al.  Optimized s-curve motion profiles for minimum residual vibration , 1998, Proceedings of the 1998 American Control Conference. ACC (IEEE Cat. No.98CH36207).

[63]  Hong Wang,et al.  Trajectory generation of high-rise/high-speed elevators , 1998, Proceedings of the 1998 American Control Conference. ACC (IEEE Cat. No.98CH36207).

[64]  N. Tounsi,et al.  Identification of acceleration deceleration profile of feed drive systems in CNC machines , 2003 .

[65]  Ramana V. Grandhi,et al.  Improving the active vibrational control of large space structures through structural modifications , 1987 .

[66]  William Singhose,et al.  Justification for Using Step-Function Reference Commands: Comparison to S-Curves , 2002 .

[67]  Ryuichi Oguro,et al.  A Positioning Control for Serial Twin Sliders with Linear Motor Drives , 2004 .

[68]  M. Yoshimura.  Evaluation of Forced and Self-Excited Vibrations at the Design Stage of Machine-Tool Structures , 1986 .

[69]  Jer-Nan Juang,et al.  Concurrent Mechanism and Control Design for the Slewing of Flexible Space Structures , 1994 .

[70]  Anthony Tzes,et al.  An adaptive input shaping control scheme for vibration suppression in slewing flexible structures , 1993, IEEE Trans. Control. Syst. Technol..

[71]  J. Perez,et al.  Command shaping for micro-mills and CNC controllers , 2005, Proceedings of the 2005, American Control Conference, 2005..

[72]  W. Book,et al.  Convolution Analysis of Milling Force Pulsation , 1994 .

[73]  T. Kawai,et al.  Ultra-precision micro structuring by means of mechanical machining , 2001, Technical Digest. MEMS 2001. 14th IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.01CH37090).

[74]  S. Sastry,et al.  Nonholonomic motion planning: steering using sinusoids , 1993, IEEE Trans. Autom. Control..

[75]  Wen-Jun Zhang,et al.  Improving motion tracking of servomotor-driven closed-loop mechanisms using mass-redistribution , 2000 .

[76]  William Singhose,et al.  Reducing deviations from trajectory components with input shaping , 1995, Proceedings of 1995 American Control Conference - ACC'95.

[77]  R. Eloundou.  Interpretation of smooth reference commands as input-shaped functions , 2002, Proceedings of the 2002 American Control Conference (IEEE Cat. No.CH37301).

[78]  Long Chen,et al.  Design for control: A concurrent engineering approach for mechatronic systems design , 2001 .

[79]  Lucien A. Schmit,et al.  Control-augmented structural synthesis , 1988 .

[80]  Jost Goettert,et al.  Direct fabrication of deep x-ray lithography masks by micromechanical milling , 1998 .

[81]  Thomas A. Dow,et al.  Tool force and deflection compensation for small milling tools , 2004 .

[82]  Manohar P. Kamat.  Integrated Optimum Structural And Control Design , 1993 .

[83]  Ibrahim N. Tansel,et al.  Modeling micro-end-milling operations. Part III: influence of tool wear , 2000 .

[84]  William Singhose,et al.  THE APPLICATION OF INPUT SHAPING TO WIRE-DRIVEN MECHANISMS , 2002 .

[85]  Howard Kaufman,et al.  Time Optimal Contour Tracking for Machine Tool Controllers , 1990, 1990 American Control Conference.

[86]  William Singhose,et al.  Command generation with sliding mode control for flexible systems , 2000, 6th International Workshop on Advanced Motion Control. Proceedings (Cat. No.00TH8494).

[87]  Jahng-Hyon Park,et al.  Concurrent Design Optimization of Mechanical Structure and Control for High Speed Robots , 1993, 1993 American Control Conference.