Three-dimensional, parallel, finite element simulation of fatigue crack growth in a spiral bevel pinion gear

Abstract This paper summarizes new results for predicting crack shape and fatigue life for a spiral bevel pinion gear using computational fracture mechanics. The predictions are based on linear elastic fracture mechanics theories combined with the finite element method, and incorporating plasticity-induced fatigue crack closure and moving loads. We show that we can simulate arbitrarily shaped fatigue crack growth in a spiral bevel gear more efficiently and with much higher resolution than with a previous boundary-element-based approach [Spievak LE, Wawrzynek PA, Ingraffea AR, Lewicki DG. Simulating fatigue crack growth in spiral bevel gears. Engng Fract Mech 2001;68(1):53–76] using the finite element method along with a better representation of moving loads. Another very significant improvement is the decrease in solution time of the problem by employing a parallel PC-cluster, an approach that is becoming more common in both research and practice. This reduces the computation time for a complete simulation from days to a few hours. Finally, the effect of change in the flexibility of the cracking tooth on the location and magnitude of the contact loads and also on stress intensity factors and fatigue life is investigated.

[1]  G. D. Bibel,et al.  Contact Stress Analysis of Spiral Bevel Gears Using Finite Element Analysis , 1995 .

[2]  Paul A. Wawrzynek,et al.  Three-Dimensional Gear Crack Propagation Studies , 1998 .

[3]  S. Vijayakar.  A combined surface integral and finite element solution for a three‐dimensional contact problem , 1991 .

[4]  R. Barsoum.  On the use of isoparametric finite elements in linear fracture mechanics , 1976 .

[5]  Yi Zhang,et al.  Local Synthesis and Tooth Contact Analysis of Face-Milled Spiral Bevel Gears , 1991 .

[6]  Mario Guagliano,et al.  FATIGUE CRACK GROWTH PREDICTION IN SPECIMENS SIMILAR TO SPUR GEAR TEETH , 1997 .

[7]  Roberto Ballarini,et al.  Effect of Rim Thickness on Gear Crack Propagation Path. , 1997 .

[8]  Roberto Ballarini,et al.  Rim Thickness Effects on Gear Crack Propagation Life , 1997 .

[9]  A. Needleman,et al.  A COMPARISON OF METHODS FOR CALCULATING ENERGY RELEASE RATES , 1985 .

[10]  Paul A. Wawrzynek,et al.  Simulating Fatigue Crack Growth in Spiral Bevel Gears , 2001 .

[11]  Jože Flašker,et al.  Crack propagation in tooth root with variable loading , 1993 .

[12]  Brian Moran,et al.  Crack tip and associated domain integrals from momentum and energy balance , 1987 .

[13]  H. deLorenzi,et al.  On the energy release rate and the J-integral for 3-D crack configurations , 1982 .

[14]  T. K. Hellen,et al.  Numerical methods for determining stress intensity factors vs crack depth in gear tooth roots , 1997 .

[15]  Brian Moran,et al.  Energy release rate along a three-dimensional crack front in a thermally stressed body , 1986, International Journal of Fracture.

[16]  Donald R. Houser,et al.  The Stress Intensity Factor and Stiffness for a Cracked Spur Gear Tooth , 1994 .

[17]  G. D. Bibel,et al.  Meshing of a Spiral Bevel Gearset With 3D Finite Element Analysis. , 1996 .

[18]  Gerd Heber,et al.  Parallel FEM Simulation of Crack Propagation - Challenges, Status, and Perspectives , 2000, IPDPS Workshops.

[19]  B. Moran,et al.  A general treatment of crack tip contour integrals , 1987 .

[20]  G. D. Bibel,et al.  Comparison of Experimental and Analytical Tooth Bending Stress of Aerospace Spiral Bevel Gears , 1999 .

[21]  M. German,et al.  Crack extension modeling with singular quadratic isoparametric elements , 1976 .

[22]  A. Ingraffea,et al.  Stress‐intensity factor computation in three dimensions with quarter‐point elements , 1980 .

[23]  F. Erdogan,et al.  On the Crack Extension in Plates Under Plane Loading and Transverse Shear , 1963 .

[24]  Carl Albrecht.  Transmission Design Using Finite Element Method Analysis Techniques , 1988 .

[25]  Joaquim B. Cavalcante Neto,et al.  An Algorithm for Three-Dimensional Mesh Generation for Arbitrary Regions with Cracks , 2001, Engineering with Computers.

[26]  S. Chan,et al.  On the Finite Element Method in Linear Fracture Mechanics , 1970 .

[27]  Robert H. Dodds,et al.  Numerical Evaluation of Domain and Contour Integrals for Nonlinear Fracture Mechanics: Formulation and Implementation Aspects , 1988 .