Periodic advancement of aluminium metal matrix composites: tribo-mechanical performance, corrosion properties, challenges and future

[1]  B. Saleh,et al.  Influence of boride, oxide, and carbide ceramics as secondary reinforcement in T6-A333 functionally graded hybrid composites , 2022, Ceramics International.

[2]  E. Olevsky,et al.  Additive manufacturing of titanium-based alloys- A review of methods, properties, challenges, and prospects , 2022, Heliyon.

[3]  S. Dwivedi,et al.  Development of Aluminium Based Composite by Utilizing Industrial Waste and Agro-Waste Material as Reinforcement Particles , 2021, Journal of The Institution of Engineers (India): Series D.

[4]  S. Gugulothu,et al.  Fabrication, Mechanical and Wear Characterization of Silicon Carbide Reinforced Aluminium 7075 Metal Matrix Composite , 2021, Silicon.

[5]  N. Radhika,et al.  Studies on Adhesive Wear Characteristics of Centrifugally Cast Functionally Graded Ceramic Reinforced Composite , 2020 .

[6]  P. Vundavilli,et al.  Recent progress in aluminum metal matrix composites: A review on processing, mechanical and wear properties , 2020 .

[7]  D. Dey,et al.  Effect of SiC Content on Mechanical and Tribological Properties of Al2024-SiC Composites , 2020, Silicon.

[8]  T. Suryakumari,et al.  Mechanical properties of aluminium metal matrix composites-A review , 2020 .

[9]  S. Shalini,et al.  Effect of T6 Treatment on Wear Behavior of Al-7Si/ ZrSiO4 Composites , 2020, Silicon.

[10]  H. Singh,et al.  Developments in the aluminum metal matrix composites reinforced by micro/nano particles – A review , 2020, Journal of Composite Materials.

[11]  N. Radhika,et al.  Synthesis of Al LM25/TiB2 in-situ composites and investigation of its adhesive wear behavior , 2020, Particulate Science and Technology.

[12]  M. Maurya,et al.  Process parameters, development and applications of stir cast composite: A review , 2020 .

[13]  T. Thankachan,et al.  Characterization of ZrC reinforced AA6061 alloy composites produced using stir casting process , 2020, Journal of Mechanical Science and Technology.

[14]  Yu Jin,et al.  Preparation, microstructures and mechanical properties of in-situ TiB2/Al composites by mechanical stirring and subsequent ultrasonic treatment , 2019, Materials Research Express.

[15]  S. Dwivedi,et al.  Physico-Chemical, Mechanical and Thermal Behaviour of Agro-waste RHA-Reinforced Green Emerging Composite Material , 2019, Arabian Journal for Science and Engineering.

[16]  Mahmoud H. Ahmed,et al.  Development of Functionally Graded Tubes Based on Pure Al/Al2O3 Metal Matrix Composites Manufactured by Centrifugal Casting for Automotive Applications , 2019, Metals and Materials International.

[17]  N. Radhika,et al.  Mechanical and tribological properties of LM13/TiO2/MoS2 hybrid metal matrix composite synthesized by stir casting , 2019 .

[18]  R. Muraliraja,et al.  A review on the production of metal matrix composites through stir casting – Furnace design, properties, challenges, and research opportunities , 2019, Journal of Manufacturing Processes.

[19]  Mohd Bilal Naim Shaikh,et al.  Rice husk ash reinforced aluminium matrix composites: fabrication, characterization, statistical analysis and artificial neural network modelling , 2019, Materials Research Express.

[20]  R. N. Rai,et al.  Characterization of dry sliding wear mechanisms of AA5083/B4C metal matrix composite , 2019, Journal of the Brazilian Society of Mechanical Sciences and Engineering.

[21]  M. Suhaib,et al.  Study of Si3N4 reinforcement on the morphological and tribo-mechanical behaviour of aluminium matrix composites , 2019, Materials Research Express.

[22]  T. Muthuramalingam,et al.  Effects of Silicon Carbide and Tungsten Carbide in Aluminium Metal Matrix Composites , 2019, Silicon.

[23]  S. C. Vettivel,et al.  Characterization and experimental analysis of boron carbide and rice husk ash reinforced AA7075 aluminium alloy hybrid composite , 2018 .

[24]  S. Chelladurai,et al.  Investigation of the mechanical properties of a squeeze-cast LM6 aluminium alloy reinforced with a zinc-coated steel-wire mesh , 2018 .

[25]  P. Maran,et al.  Mechanical and tribological behavior of the metal matrix composite AA6061/ZrO2/C , 2017 .

[26]  V. Sharma,et al.  Effect of flyash particles with aluminium melt on the wear of aluminium metal matrix composites , 2017 .

[27]  C. Merino,et al.  Metal matrix composites reinforced with carbon nanotubes by an alternative technique , 2017 .

[28]  H. Costa,et al.  Effect of debris size on the reciprocating sliding wear of aluminium , 2017 .

[29]  K. Alaneme,et al.  Microstructure and mechanical behavior of stir-cast Zn–27Al based composites reinforced with rice husk ash, silicon carbide, and graphite , 2017 .

[30]  R. Keshavamurthy,et al.  Mechanical Properties of Aluminium-Graphene Composite Synthesized by Powder Metallurgy and Hot Extrusion , 2017, Transactions of the Indian Institute of Metals.

[31]  P. Sahoo,et al.  Tribological Characterization of Stir-cast Aluminium-TiB2 Metal Matrix Composites , 2016, Silicon.

[32]  P. Menezes,et al.  Influences of graphite reinforcement on the tribological properties of self-lubricating aluminum matrix composites for green tribology, sustainability, and energy efficiency—a review , 2016 .

[33]  K. Alaneme,et al.  Aluminium matrix hybrid composites: a review of reinforcement philosophies; mechanical, corrosion and tribological characteristics , 2015 .

[34]  D. Khanduja,et al.  Production and some properties of Si3N4 reinforced aluminium alloy composites , 2015 .

[35]  Qussay Younis Hamid,et al.  Ultrasonic Attenuation of (Al-SiC) Particulate Aluminum Matrix Composite , 2015 .

[36]  S. C. Vettivel,et al.  Mechanical behavior and wear prediction of stir cast Al–TiB2 composites using response surface methodology , 2014 .

[37]  M. R. Toroghinejad,et al.  Reciprocating wear resistance of Al–SiC nano-composite fabricated by accumulative roll bonding process , 2013 .

[38]  Cecilia Anthony Das,et al.  Sugarcane bagasse—The future composite material: A literature review , 2013 .

[39]  J. Lai,et al.  Precipitation strengthening of Al–B4C metal matrix composites alloyed with Sc and Zr , 2013 .

[40]  Qiang Liu,et al.  Microstructure and mechanical property of multi-walled carbon nanotubes reinforced aluminum matrix composites fabricated by friction stir processing , 2013 .

[41]  I. Dinaharan,et al.  Synthesis and characterization of in situ formed titanium diboride particulate reinforced AA7075 aluminum alloy cast composites , 2013 .

[42]  B. Kumar,et al.  Metallurgical and mechanical characterization of stir cast AA6061-T6–AlNp composite , 2012 .

[43]  F. Toptan,et al.  Reciprocal dry sliding wear behaviour of B4Cp reinforced aluminium alloy matrix composites , 2012 .

[44]  M. A. Baghchesara,et al.  Microstructural and mechanical properties of nanometric magnesium oxide particulate-reinforced aluminum matrix composites produced by powder metallurgy method , 2012 .

[45]  T. Sornakumar,et al.  Friction and wear studies of die cast aluminum alloy‐aluminum oxide‐reinforced composites , 2010 .

[46]  D. K. Dwivedi,et al.  Dry reciprocating wear of Al–Si–SiCp composites: A statistical analysis , 2010 .

[47]  Y. Şahin.  Abrasive wear behaviour of SiC/2014 aluminium composite , 2010 .

[48]  V. Chawla,et al.  Development of Aluminium Based Silicon Carbide Particulate Metal Matrix Composite , 2009 .

[49]  M. Martínez,et al.  Effect of Boron Carbide Filler on the Curing and Mechanical Properties of an Epoxy Resin , 2009 .

[50]  T. Rajasekharan,et al.  Aluminium matrix composites by pressureless infiltration: the metallurgical and physical properties , 2008 .

[51]  M. Pech-Canul,et al.  Corrosion characteristics of hybrid Al/SiCp/MgAl2O4 composites fabricated with fly ash and recycled aluminum , 2007 .

[52]  K. Das,et al.  Abrasive wear of zircon sand and alumina reinforced Al–4.5 wt%Cu alloy matrix composites – A comparative study , 2007 .

[53]  M. Kök.  Abrasive wear of Al2O3 particle reinforced 2024 aluminium alloy composites fabricated by vortex method , 2006 .

[54]  I. Matsushima,et al.  Corrosion resistance of Al-based metal matrix composites , 1995 .

[55]  S. Iijima.  Helical microtubules of graphitic carbon , 1991, Nature.

[56]  A. Balan,et al.  Electrochemical machining behaviour of AA6063-TiC composites by using response surface methodology , 2020 .

[57]  R. Rimašauskienė,et al.  Matrix materials used in composites: A comprehensive study , 2020, Materials Today: Proceedings.

[58]  P. Srinivas,et al.  Effect of silicon carbide, magnesium oxide as reinforcing elements and zinc sterate as binding agent in the characterization of Al functionally graded materials for automotive applications , 2020 .

[59]  Amandeep Singh Wadhwa,et al.  Mechanical Characterization of hybrid aluminium composite-a review , 2018 .

[60]  Bhaskar Chandra Kandpal,et al.  Manufacturing and technological challenges in Stir casting of metal matrix composites– A Review , 2018 .

[61]  S. Shalini,et al.  Bagasse Ash Reinforced A356 Alloy Composite: Synthesis and Characterization , 2018 .

[62]  D. Parhi,et al.  Crack Assessment by FEM of AMMC Beam Produced by Modified Stir Casting Method , 2015 .

[63]  R. Purohit,et al.  Advanced Aluminium Matrix Composites: The Critical Need of Automotive and Aerospace Engineering Fields , 2015 .

[64]  G. Narasaraju,et al.  Characterization of Hybrid Rice Husk and Fly ash-Reinforced Aluminium alloy (AlSi10Mg) Composites , 2015 .

[65]  R. Maheswaran,et al.  Effect of inclusion of SiC particulates on the mechanical resistance behaviour of stir-cast AA6063/SiC composites , 2015 .

[66]  S. Das,et al.  Characterization of Mechanical Properties and Microstructure of Aluminium Alloy-SiC Composites☆ , 2015 .

[67]  S. A. Kori,et al.  Preparation of 6061Al-Al2O3 MMC's by Stir Casting and Evaluation of Mechanical and Wear Properties , 2014 .

[68]  D. Prasad,et al.  Investigations on mechanical properties of aluminum hybrid composites , 2014 .

[69]  K. C. Mohanakumara,et al.  Development and Mechanical Properties of SiC Reinforced Cast and Extruded Al based Metal Matrix Composite , 2014 .

[70]  M. Rahman,et al.  Characterization of Silicon Carbide Reinforced Aluminum Matrix Composites , 2014 .

[71]  S. Rajesh,et al.  Statistical Analysis of Dry Sliding Wear Behavior of Graphite Reinforced Aluminum MMCs , 2014 .

[72]  K. Allesu,et al.  Effect of T6 Heat Treatment in the Microstructure and Mechanical Properties of A356 Reinforced with Nano Al2O3 Particles by Combination Effect of Stir and Squeeze Casting , 2014 .

[73]  M. Kumar,et al.  Effect of Mechanical Properties on Rice Husk Ash Reinforced Aluminum Alloy (AlSi10Mg) Matrix Composites , 2013 .

[74]  J. Selvam,et al.  Synthesis and Characterization of Al6061-Fly Ashp-SiCp Composites by Stir Casting and Compocasting Methods , 2013 .

[75]  V. Balasubramanian,et al.  Effect of reinforcement size and volume fraction on the abrasive wear behaviour of AA7075 Al/SiCp P/M composites—A statistical analysis , 2010 .

[76]  A. Turnbull.  Review of corrosion studies on aluminium metal matrix composites , 1992 .