In situ spectroscopy of complex surface reactions on supported Pd-Zn, Pd-Ga, and Pd(Pt)-Cu nanoparticles.

It is well accepted that catalytically active surfaces frequently adapt to the reaction environment (gas composition, temperature) and that relevant "active phases" may only be created and observed during the ongoing reaction. Clearly, this requires the application of in situ spectroscopy to monitor catalysts at work. While changes in structure and composition may already occur for monometallic single crystal surfaces, such changes are typically more severe for oxide supported nanoparticles, in particular when they are composed of two metals. The metals may form ordered intermetallic compounds (e.g. PdZn on ZnO, Pd2Ga on Ga2O3) or disordered substitutional alloys (e.g. PdCu, PtCu on hydrotalcite). We discuss the formation and stability of bimetallic nanoparticles, focusing on the effect of atomic and electronic structure on catalytic selectivity for methanol steam reforming (MSR) and hydrodechlorination of trichloroethylene. Emphasis is placed on the in situ characterization of functioning catalysts, mainly by (polarization modulated) infrared spectroscopy, ambient pressure X-ray photoelectron spectroscopy, X-ray absorption near edge structure, and X-ray diffraction. In the present contribution, we pursue a two-fold, fundamental and applied, approach investigating technologically applied catalysts as well as model catalysts, which provides comprehensive and complementary information of the relevant surface processes at the atomic or molecular level. Comparison to results of theoretical simulations yields further insight. Several key aspects were identified that control the nanoparticle functionality: (i) alloying (IMC formation) leads to site isolation of specific (e.g. Pd) atoms but also yields very specific electronic structure due to the (e.g. Zn or Ga or Cu) neighboring atoms; (i) for intermetallic PdZn, the thickness of the surface alloy, and its resulting valence band structure and corrugation, turned out to be critical for MSR selectivity; (ii) the limited stability of phases, such as Pd2Ga under MSR conditions, also limits selectivity; (iii) favorably bimetallic catalysts act bifunctional, such as activating methanol AND water or decomposing trichlorothylene AND activating hydrogen; (iv) bifunctionality is achieved either by the two metals or by one metal and the metal-oxide interface; (v) intimate contact between the two interacting sites is required (that cannot be realized by two monometallic nanoparticles being just located close by). The current studies illustrate how rather simple bimetallic nanoparticles may exhibit intriguing diversity and flexibility, exceeding by far the properties of the individual metals. It is also demonstrated how complex reactions can be elucidated with the help of in situ spectroscopy, in particular when complementary methods with varying surface sensitivity are applied.

[1]  A. Datye,et al.  Interaction of CO with Surface PdZn Alloys , 2007 .

[2]  R. Schlögl,et al.  Subsurface-controlled CO2 selectivity of PdZn near-surface alloys in H2 generation by methanol steam reforming. , 2010, Angewandte Chemie.

[3]  Yong Wang,et al.  Review of developments in portable hydrogen production using microreactor technology. , 2004, Chemical reviews.

[4]  G. Rupprechter,et al.  Microstructural Changes of Supported Intermetallic Nanoparticles under Reductive and Oxidative Conditions: An in Situ X-ray Absorption Study of Pd/Ga2O3 , 2012 .

[5]  Konstantin M. Neyman,et al.  Electronic properties of thin Zn layers on Pd(1 1 1) during growth and alloying , 2006 .

[6]  R. Schlögl,et al.  How to Control the Selectivity of Palladium‐based Catalysts in Hydrogenation Reactions: The Role of Subsurface Chemistry , 2012 .

[7]  N. Iwasa,et al.  New Supported Pd and Pt Alloy Catalysts for Steam Reforming and Dehydrogenation of Methanol , 2003 .

[8]  Di Wang,et al.  Pd/Ga2O3 methanol steam reforming catalysts: Part I. Morphology, composition and structural aspects , 2009 .

[9]  G. Somorjai,et al.  Ultrahigh vacuum high-pressure reaction system for 2-infrared 1-visible sum frequency generation studies , 2001 .

[10]  G. Rupprechter,et al.  Sum Frequency Generation and Infrared Reflection Absorption Spectroscopy , 2012 .

[11]  F. Netzer,et al.  Growth and desorption kinetics of ultrathin Zn layers on Pd(111) , 2009 .

[12]  D. Ferri,et al.  Who Is Doing the Job? Unraveling the Role of Ga2O3 in Methanol Steam Reforming on Pd2Ga/Ga2O3 , 2012 .

[13]  H. Okamoto Ga-Pd (Gallium-Palladium) , 2008 .

[14]  J. Llorca,et al.  PdCu alloy nanoparticles on alumina as selective catalysts for trichloroethylene hydrodechlorination to ethylene , 2013 .

[15]  D. Luebke,et al.  Hydrogen-Assisted 1,2-Dichloroethane Dechlorination Catalyzed by Pt−Cu/SiO2: Evidence for Different Functions of Pt and Cu Sites , 2003 .

[16]  J. Rodríguez Interactions in bimetallic bonding. Electronic and chemical properties of PdZn surfaces , 1994 .

[17]  J. Pirard,et al.  Palladium–Silver Sol–Gel Catalysts for Selective Hydrodechlorination of 1,2-Dichloroethane into Ethylene: III. Kinetics and Reaction Mechanism , 2001 .

[18]  R. Schlögl,et al.  Temperature-Induced Modifications of PdZn Layers on Pd(111) , 2010 .

[19]  R. Schlögl,et al.  Steam reforming of methanol on PdZn near-surface alloys on Pd(1 1 1) and Pd foil studied by in-situ XPS, LEIS and PM-IRAS , 2010 .

[20]  A. Tsai,et al.  PdZn=Cu: Can an Intermetallic Compound Replace an Element? , 2004 .

[21]  I. Bakó,et al.  A theoretical study of Zn adsorption and desorption on a Pd(111) substrate , 2010 .

[22]  J. Sinfelt,et al.  Catalysis by alloys and bimetallic clusters , 1977 .

[23]  A. Datye,et al.  Initial steps in methanol steam reforming on PdZn and ZnO surfaces: Density functional theory studies , 2011 .

[24]  R. Schlögl,et al.  In situ XPS study of methanol reforming on PdGa near-surface intermetallic phases , 2012, Journal of catalysis.

[25]  Konstantin M. Neyman,et al.  Comparative theoretical study of formaldehyde decomposition on PdZn, Cu, and Pd surfaces. , 2006, The journal of physical chemistry. B.

[26]  J. Sueiras,et al.  Study of Pt-CeO2 interaction and the effect in the selective hydrodechlorination of trichloroethylene , 2009 .

[27]  D. Su,et al.  Ga‐Pd/Ga2O3 Catalysts: The Role of Gallia Polymorphs, Intermetallic Compounds, and Pretreatment Conditions on Selectivity and Stability in Different Reactions , 2012 .

[28]  J. Sueiras,et al.  Gas-phase hydrodechlorination of trichloroethylene over Pd/NiMgAl mixed oxide catalysts , 2012 .

[29]  M. Armbrüster,et al.  The Intermetallic Compound ZnPd and Its Role in Methanol Steam Reforming , 2013 .

[30]  R. A. Santen,et al.  Surface Composition and Selectivity of Alloy Catalysts , 1977 .

[31]  Konstantin M. Neyman,et al.  Microscopic models of PdZn alloy catalysts: structure and reactivity in methanol decomposition. , 2007, Physical chemistry chemical physics : PCCP.

[32]  V. Kovalchuk,et al.  Catalytic chemistry of chloro- and chlorofluorocarbon dehalogenation: from macroscopic observations to molecular level understanding , 2004 .

[33]  J. Calvino,et al.  The role of Pd–Ga bimetallic particles in the bifunctional mechanism of selective methanol synthesis via CO2 hydrogenation on a Pd/Ga2O3 catalyst , 2012 .

[34]  M. Schmidt,et al.  Refinement of the crystal structure of dipalladium gallium, Pd2Ga , 2008 .

[35]  D. Luebke,et al.  Hydrodechlorination of 1,2-dichloroethane catalyzed by Pt-Cu/C: effect of catalyst pretreatment , 2002 .

[36]  M. Armbrüster,et al.  Influence of bulk composition of the intermetallic compound ZnPd on surface composition and methanol steam reforming properties , 2012 .

[37]  R. Schlögl,et al.  Local Catalytic Ignition during CO Oxidation on Low-Index Pt and Pd Surfaces: A Combined PEEM, MS, and DFT Study** , 2012, Angewandte Chemie.

[38]  R. Schlögl,et al.  A new approach to well-defined, stable and site-isolated catalysts , 2007 .

[39]  J. Llorca,et al.  Pretreatment Effect on Pt/CeO2 Catalyst in the Selective Hydrodechlorination of Trichloroethylene , 2010 .

[40]  R. Schlögl,et al.  In situ Surface Characterization of the Intermetallic Compound PdGa – A Highly Selective Hydrogenation Catalyst , 2009 .

[41]  R. Schlögl,et al.  In situ study of the formation and stability of supported Pd2Ga methanol steam reforming catalysts , 2012 .

[42]  Di Wang,et al.  Growth and structural stability of well-ordered PdZn alloy nanoparticles , 2006 .

[43]  Konstantin M. Neyman,et al.  Geometric Arrangement of Components in Bimetallic PdZn/Pd(111) Surfaces Modified by CO Adsorption: A Combined Study by Density Functional Calculations, Polarization-Modulated Infrared Reflection Absorption Spectroscopy, and Temperature-Programmed Desorption , 2012 .

[44]  K. Föttinger The effect of CO on intermetallic PdZn/ZnO and Pd2Ga/Ga2O3 methanol steam reforming catalysts: A comparative study , 2013 .

[45]  N. Iwasa,et al.  Steam reforming and dehydrogenation of methanol: Difference in the catalytic functions of copper and group VIII metals , 1997 .

[46]  G. Rupprechter,et al.  Hydrodechlorination of trichloroethylene on noble metal promoted Cu-hydrotalcite-derived catalysts , 2009 .

[47]  J. Bokhoven,et al.  Dynamic Structure of a Working Methanol Steam Reforming Catalyst: In Situ Quick-EXAFS on Pd/ZnO Nanoparticles , 2011 .

[48]  S. Penner,et al.  Pd/Ga2O3 methanol steam reforming catalysts: Part II. Catalytic selectivity , 2009 .

[49]  O. Lebedev,et al.  Pd-In2O3 interaction due to reduction in hydrogen: Consequences for methanol steam reforming , 2010 .

[50]  J. Rodríguez,et al.  Physical and chemical properties of bimetallic surfaces , 1996 .