Optimal Dispatch of Combined Cooling, Heating and Power Microgrid with Advanced Adiabatic Compressed Air Energy Storage

Advanced adiabatic compressed air energy storage (AA-CAES) is a promising large-scale energy storage technology inherently combined cooling, heating and power (CCHP) generation, with the additional merits of high energy efficiency, long service time and zero carbon emission. In this paper, an integrated energy system dispatch-oriented AA-CAES model is developed, where the relationships between charging, discharging, heating and cooling power, and the state of charges (SOC) of air storage (AS) and thermal energy storage (TES) is established around air and heat transfer oil mass flow rate. The economic dispatch of a CCHP microgrid with AA-CAES is then modeled as mixed integer quadratic programming (MIQP). The simulation results demonstrate that the proposed AA-CAES dispatch model delivers more practical scheduling strategies and also verifies the economic benefits of AA-CAES operating in CCHP mode for reducing system operation cost and increasing renewables accommodation.

[1]  Minlin Yang,et al.  Design/off-design performance analysis and comparison of two different storage modes for trigenerative compressed air energy storage system , 2020 .

[2]  Wei Wei,et al.  Modeling and Optimization of Interdependent Energy Infrastructures , 2020 .

[3]  Sen Guo,et al.  Thermodynamic analyses and multi-objective optimization of operation mode of advanced adiabatic compressed air energy storage system , 2018, Energy Conversion and Management.

[4]  Hongbin Sun,et al.  Integrated Energy Management System: Concept, Design, and Demonstration in China , 2018, IEEE Electrification Magazine.

[5]  Tao Jiang,et al.  Optimal dispatch strategy for integrated energy systems with CCHP and wind power , 2017 .

[6]  Chongqing Kang,et al.  Optimal joint-dispatch of energy and reserve for CCHP-based microgrids , 2017 .

[7]  Laijun CHEN,et al.  Optimal dispatch of zero-carbon-emission micro Energy Internet integrated with non-supplementary fired compressed air energy storage system , 2016 .

[8]  P. Li,et al.  Thermo-economic analysis and optimization of a combined cooling, heating and power system based on advanced adiabatic compressed air energy storage , 2020 .

[9]  Yaowang Li,et al.  Combined Heat and Power dispatch considering Advanced Adiabatic Compressed Air Energy Storage for wind power accommodation , 2019, Energy Conversion and Management.

[10]  Laijun Chen,et al.  Modeling and dispatch of advanced adiabatic compressed air energy storage under wide operating range in distribution systems with renewable generation , 2020 .

[11]  Lizhong Xu,et al.  A Multi Time-Scale and Multi Energy-Type Coordinated Microgrid Scheduling Solution—Part I: Model and Methodology , 2015, IEEE Transactions on Power Systems.

[12]  Dan Wang,et al.  Modelling study, efficiency analysis and optimisation of large-scale Adiabatic Compressed Air Energy Storage systems with low-temperature thermal storage , 2016 .

[13]  Jun Wang,et al.  An Online Optimal Dispatch Schedule for CCHP Microgrids Based on Model Predictive Control , 2017, IEEE Transactions on Smart Grid.

[14]  Yongjun Xu,et al.  Multi-objective optimization, design and performance analysis of an advanced trigenerative micro compressed air energy storage system , 2019, Energy Conversion and Management.

[15]  Sen Guo,et al.  Investigation of operation strategy of combined cooling, heating and power(CCHP) system based on advanced adiabatic compressed air energy storage , 2018, Energy.

[16]  Shengwei Mei,et al.  Interdependence of electricity and heat distribution systems coupled by an AA‐CAES‐based energy hub , 2019, IET Renewable Power Generation.